aiwa BST-650 Portable Speaker User Manual

June 3, 2024
Aiwa

aiwa BST-650 Portable Speaker

Important Safety Instructions

  1. Please do not place the device near any form of heat source.
  2. Please use the accessories specified by the manufacturer.
  3. Please refer all servicing/repairs to a qualified personnel should there be any form of damage to the device. Keep this user manual for future reference/ troubleshooting.
  4. Please heed ALL safety cautions.

Safety Cautions

  1. Always keep the device AWAY from fire and heat sources. Do NOT attempt to disassemble or alter the device. Do NOT expose the device to excessive heat (Direct sunlight etc.).
  2. Do NOT immerse the device in any form of liquids.

Unboxing

  •  BST-650 BT speaker x1
  •  Type C charging cable x1
  •  Instruction x1
  •  Cotton – Linen Blend Fabric Pouch

Product Specifications

  • Model Number: BST-650
  • BT version: V5.0
  • BT Distance: ≥10M (open distance)
  • Play Mode: BT/ AUX / Micro SD card (TF card) / TWS Battery: 2000mAh / 7.4V
  • Rated power:20W
  • Charging Input: DC 5V 2A(Max)
  • Working Time: 4-13 hours (depends on different volume)
  • Charging Time: 4 hours (battery empty status)
  • Distortion Rate: THD<10%
  • Horn: 45mm x2
  • Product Size: 200x85x83mm

Product Overview

  1.  Light key
  2.  Volume”+” / Next song
  3.  On/Off
  4.  Volume”-” / Previous song
  5.  Play/Pause& On/OFF TWS&Disconnect the Bluetooth
  6.  Reset key
  7.  Micro SD card(TF card)
  8.  Aux port
  9.  Type-C Charging port
  10.  Charging indicator
  11.  Mic

Connecting the Product

  •  Long press: Turn on the speaker and enter Bluetooth mode. The speaker will voice ”Welcome to Aiwa” & “Bluetooth Mode”.
  • Lighting will flash rapidly when the Bluetooth device is not connected, use the Bluetooth device to search for “AIWA BST-650” and click to connect.
  • Upon Bluetooth connection, the speaker will voice “Bluetooth connected”.
  • Short press: Audio switch mode
  • Long press: Power off the speaker, and the speaker will voice” Bye-bye”.  Short press x1: Play/Pause
  • Long press: Disconnect the Bluetooth device
  • Press 3 seconds: On/OFF TWS function

TWS Function

Power on two AIWA BST-650 Speakers and enter Bluetooth mode. Press and hold the button “ ” for 3s on one of the speakers, when you hear the prompt sound “True Wireless Stereo Mode ”, then the two speakers will be connected automatically. (When paired, the speaker will voice “True Wireless Stereo Paired successfully ”) Now please turn on the Bluetooth function of your mobile/other devices. and connect it to “BST-650”. When connected, the two speakers can play music at the same time. Press and hold the button “ ” for 3s on one of the speakers to disable TWS mode. (The speaker will voice “True Wireless Stereo Disconnected”).

Note:

  1. Please ensure both speakers are using Bluetooth mode.
  2. If two speakers before TWS paired, the next time when you power on these two speakers, both will be paired automatically.
  3. During TWS mode, functions can be operated synchronously by either of the models.

Light Mode
Short press x1: Lighting effect switch/lighting on Long press 3S: Lighting off

Music control -/+
Short press x1: Volume”-“/”+” Long press:Previous/Next song

Answer the phone
Short press x1: Answer/Hang up Short press x2:Dial the last call Long press: Reject call

Switch audio playback modes
Short press X 1: Switch audio playback mode The last connected source of audio will be the playback source. Voice prompts from the speaker will be present while you switch between modes.

Product charge

  • The red light on The battery is charging

  • Red light off: Fully charged
    Low battery capacity: The speaker will prompt “ low battery”.

  • To preserve battery lifespan, fully charge at least once every 45 days.

  • Intelligent power-saving function

  • The speaker will power down automatically after 5 minutes of inactivity.

Charging and battery information

  1.  This product has a built-in non-removable and rechargeable battery. Please use the equipped Type-C cable to charge the battery.
  2.  The charging current voltage is 5V/2A(Max).
  3.  Please choose the charger that passes the regular manufacturer’s safety certification.
  4.  Repeated charging on the speaker will cause battery performance degradation over time, which is a normal phenomenon for all rechargeable batteries.AIWA Electronics International Co., Ltd. Explore more at www.int-aiwa.com

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals