aiwa BST-330 Portable Speaker User Manual

October 30, 2023
Aiwa

aiwa BST-330 Portable Speaker

aiwa BST-330 Portable Speaker-prodcut

Product Information

The BST-330 is a Bluetooth speaker manufactured by AIWA Electronics International Co., Ltd. The speaker comes with a Type C charging cable, an Aux in cable, and an instruction manual. The device is equipped with Bluetooth version 5.0 and has a maximum Bluetooth distance of 10 meters. The speaker can be used in BT/AUX/Micro SD card (TF card) play modes and has a 1500mAh/3.7V battery. The charging input required for the device is DC 5V 1A (Max). The working time of the device varies from 4-13 hours depending on the volume, and the charging time required is 2.5
hours (battery empty status). The device has a THD distortion rate.

Product Usage Instructions

  1. Ensure that the device is not placed near any form of heat sources.
  2. Use only the accessories specified by the manufacturer.
  3. Refer all servicing/repairs to a qualified personnel should there be any form of damage to the device.
  4. Keep the user manual for future referencing/troubleshooting.
  5. Heed ALL safety cautions.

Safety Cautions

  1. Always keep device AWAY from fire and heat sources.
  2. Do NOT attempt to disassemble or alter the device.
  3. Do NOT expose device to excessive heat (Direct sunlight etc.).
  4. Do NOT immerse device into any form of liquids.

To use the Bluetooth speaker, follow the below instructions:

  1. Ensure that the device is fully charged before use.
  2. Turn on the speaker by pressing the power button.
  3. The speaker will enter into Bluetooth pairing mode automatically. Alternatively, press and hold the Bluetooth button to enter pairing mode.
  4. Turn on the Bluetooth on your device and search for available devices.
  5. Select ‘BST-330’ from the list of available devices.
  6. Once connected, play your music and adjust the volume as desired.

To use the speaker in AUX mode:

  1. Connect one end of the Aux in cable to the speaker’s Aux port and the other end to the audio source.
  2. Turn on the speaker and select ‘AUX’ mode by pressing the mode button.
  3. Play your audio source and adjust the volume as desired.

To use the speaker with a Micro SD card:

  1. Insert a Micro SD card into the speaker’s card slot.
  2. Turn on the speaker and select ‘TF’ mode by pressing the mode button.
  3. Play your audio source and adjust the volume as desired.

Ensure that you do not use any damaged components and contact your local authorized AIWA distributor/customer service should you require any assistance.

Important Safety Instructions

  1. Please do not place device near any form of heat sources.
    Please use the accessories specified by the manufacturer.
    Please refer all servicing/repairs to a qualified personnel should there by any form of damage to the device. Keep this user manual for future referencing/ troubleshooting.
    Please heed ALL safety cautions.

Safety Cautions

  1. Always keep device AWAY from fire and heat sources. Do NOT attempt to disassemble or alter the device. Do NOT expose device to excessive heat (Direct sunlight etc.).
    Do NOT immerse device into any form of liquids.

Unboxing

aiwa BST-330 Portable Speaker-fig1

  • – Bluetooth speaker x1
    – Type C charging cable x1
    – Aux in cable x1
    – Instruction x1

Please refrain from using any damaged components.
Contact your local authorized AIWA distributor/customer service should you need any assistance.

Product Specifications

  • Model Number: BST-330
  • BT version: V5.0
  • BT Distance: ≥10M (open distance)
  • Play Mode: BT/ AUX / Micro SD card (TF card)
  • Battery: 1500mAh / 3.7V
  • Charging Input: DC 5V 1A (Max)
  • Working Time: 4-13 hours (depends on different volume)
  • Charging Time: 2.5 hours (battery empty status)
  • Distortion Rate: THD<10%
  • Horn: 50mm x1
  • Product Size: 110x74x74mm

The above playback & charging times are estimated values tested in a practical environment and may vary upon individual usage habits.

Product Overview

aiwa BST-330 Portable Speaker-fig2

  1. 1. Light key
    2. Volume”-” / Previous song
    3. Volume”+” / Next song
    4. On/off/Audio/Play/Pause
    5. Micro SD card(TF card)
    6. Aux port
    7. Charging indicator
    8. Charging port
    9. Reset key

Connecting the Product

aiwa BST-330 Portable Speaker-fig3

  • “④” Long press: Turn on the speaker and enter bluetooth mode.The speaker will voice “Welcome to aiwa” & “Bluetooth Mode”.
    Lighting is runing fast if bluetooth device not connected , use the bluetooth device to search for “AIWA BST-330” and click to connect.
    Once bluetooth connected, the speaker will voice “ Bluetooth connected”.
    Short press x 2: Audio switch mode
    Short press x 3: Start/Close siri
    Long press again: Power off the speaker,speaker will voice” Bye bye”
    “②③” Short press together: Disconnect Bluetooth device, then the speaker will voice “Blueotooth disconnected”.
    And short press “②③” together again, speaker will connect bluetooth device automatically.

Music control -/+
Short press x1: Volume”-“/”+”
Long press:Previous/Next song
Note:When speaker at Maximum or Minimum volume, the speaker will voice ” Maximun volume” or ”Minimum volume”.
“④” Short press x 1:Play/Pause

Answer the phone
Short press x1: Answer
Long press: Hang up

Audio connection
Short press x 2: Audio switch mode.
When inserting audio devices, it will play the last insert one first. When you enter the different mode, the speaker will voice the different prompts to guide.

Light Mode
Short press x1: Lighting effect switch
Short press x2: Lighting on/off

Product charge

Red light on The battery is charging
Red light off: Fully charged
Note: When speaker with low battery capacity, the speaker will prompt “ Low battery”.
To preserve battery lifespan, fully charge at least once every 45 days.

Intelligent power-saving function
The speaker will be automatically powered off if the product no any operations for about 5 minutes.
Note: Please long press button“④”again to power on the speaker.

Charging and battery information

  1. This product has a built-in non-removable and rechargeable battery. Please use the equipped Type-C cable to charge the battery.
  2. The charging current voltage is 5V/1A (Max).
  3. lease choose the charger that passes the regular manufacturer’s safety certification.
  4. Repeated charging on the speaker will cause battery performance degradation overtime, which is a normal phenomenon for all rechargeable batteries.

AIWA Electronics International Co., Ltd. Explore more at www.int-aiwa.com

E-Manual

Mandrops AG
Bahnhofstrasse 17
96106 Ebern
Germany

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals