tp-link ER7412-M2 Omada Multi Gigabit VPN Gateway Instructions

September 30, 2024
tp-link

ER7412-M2 Omada Multi Gigabit VPN Gateway

“`html

Product Information

Specifications

  • FCC Compliance: Yes

  • CE Mark: Class A

  • EU Declaration of Conformity: Compliant with directives
    2014/30/EU, 2014/35/EU, 2011/65/EU, and (EU)2015/863

  • UKCA Mark: Yes

  • Industry Canada Statement: CAN ICES-3 (A)/NMB-3(A)

Product Usage Instructions

Safety Information

Keep the device away from water, fire, humidity, or hot
environments. Do not attempt to disassemble, repair, or modify the
device. If you need service, please contact us. Place the device
with its bottom surface downward. Plug the product into the wall
outlets with earthing connection through the power supply cord. The
plug on the power supply cord is used as the disconnect device, the
socket-outlet shall be.

Please read and follow the above safety information when
operating the device. We cannot guarantee that no accidents or
damage will occur due to improper use of the device. Please use
this product with care and operate at your own risk.

Explanation of Symbols on Product Label

Note: The product label can be found at the bottom of the
product and its I.T.E. power supply. Symbols may vary from
products.

  • Class II equipment
  • Class II equipment with functional earthing
  • Alternating current
  • Direct current
  • Polarity of d.c. power connector
  • For indoor use only
  • Dangerous voltage
  • Caution, risk of electric shock
  • Energy efficiency Marking
  • Protective earth
  • Earth
  • Frame or chassis
  • Functional earthing
  • Caution, hot surface
  • Fuse
  • Fuse is used in neutral N RECYCLING

FAQs (Frequently Asked Questions)

Q: Can I submerge the device in water?

A: No, keep the device away from water as mentioned in the
safety information.

Q: Can I repair the device myself?

A: No, do not attempt to disassemble, repair, or modify the
device. Contact customer service for assistance.

Q: How should I dispose of the product?

A: This product must be handled pursuant to European directive
2012/19/EU for recycling or dismantling. Contact a competent
recycling organization or retailer for proper disposal.

“`

FCC Compliance Information Statement
Product Name: Omada Multi-Gigabit VPN Gateway Model Number: ER7412-M2 Responsible party: TP-Link Systems Inc. Address: 10 Mauchly, Irvine, CA 92618 Website: https://www.tp-link.com/us/ Tel: +1 626 333 0234 Fax: +1 909 527 6804 E-mail: sales.usa@tp-link.com This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) This device may not cause harmful interference. 2) This device must accept any interference received, including interference that may cause
undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. We, TP-Link Systems Inc., has determined that the equipment shown as above has been shown to comply with the applicable technical standards, FCC part 15. There is no unauthorized change is made in the equipment and the equipment is properly maintained and operated.
Issue Date: 2024-09-05
CE Mark Warning

This is a class A product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures.
EU Declaration of Conformity
TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/30/EU, 2014/35/EU, 2011/65/EU and (EU)2015/863. The original EU declaration of conformity may be found at https://www.tp-link.com/en/support/ce/
UKCA Mark
UK Declaration of Conformity
TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of the Electromagnetic Compatibility Regulations 2016 and Electrical Equipment (Safety) Regulations 2016. The original UK declaration of conformity may be found at https://www .tp-link.com/support/ukca/
Industry Canada Statement
CAN ICES-3 (A)/NMB-3(A) A
VCCIA
BSMI Notice

Pb

Hg

Cd

Cr+6

PBB

PBDE

PCB

1. “0.1 wt %” “0.01 wt %” 2.”” 3.”–”

, .

Safety Information
Keep the device away from water, fire, humidity or hot environments. Do not attempt to disassemble, repair, or modify the device. If you need service, please
contact us. Place the device with its bottom surface downward. Plug the product into the wall outlets with earthing connection through the power supply cord. The plug on the power supply cord is used as the disconnect device, the socket-outlet shall be
easily accessible. The operating temperature for the device shall be within 0°C to 40°C (32°F to 104°F). Apparatets stikprop skal tilsluttes en stikkontakt med jord som giver forbindelse til
stikproppens jord. (Dansk) Laite on liitettävä suojakoskettimilla varustettuun pistorasiaan.(Suomi) Apparatet må tilkoples jordet stikkontakt.(Norsk) Apparaten skall anslutas till jordat uttag. (Sweden)

Please read and follow the above safety information when operating the device. We cannot guarantee that no accidents or damage will occur due to improper use of the device. Please use this product with care and operate at your own risk.
Explanation of the symbols on the product label
Note: The product label can be found at the bottom of the product and its I.T.E. power supply. Symbols may vary from products.
Symbol Explanation Class II equipment
Class II equipment with functional earthing Alternating current Direct current Polarity of d.c. power connector For indoor use only
Dangerous voltage
Caution, risk of electric shock
Energy efficiency Marking
Protective earth
Earth
Frame or chassis
Functional earthing
Caution, hot surface

Caution
Operator’s manual
Stand-by
“ON”/”OFF” (push-push)
Fuse
Fuse is used in neutral N RECYCLING This product bears the selective sorting symbol for Waste electrical and electronic equipment (WEEE). This means that this product must be handled pursuant to European directive 2012/19/EU in order to be recycled or dismantled to minimize its impact on the environment. User has the choice to give his product to a competent recycling organization or to the retailer when he buys a new electrical or electronic equipment.
Caution, avoid listening at high volume levels for long periods

Disconnection, all power plugs

m

Switch of mini-gap construction

Switch of micro-gap construction (for US version)

µ

Switch of micro-gap / micro-disconnection construction (for other

versions except US)

Switch without contact gap (Semiconductor switching device)

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals