Haier SBC001 Android Board For GEA LCD Instructions
- September 29, 2024
- Haier
Table of Contents
SBC001 Android Board For GEA LCD
“`html
Specifications:
-
Product Name: SBC (Single Board Computer) Module for GEA LCD
products -
Features: Wi-Fi/Bluetooth module
-
Certifications: FCC, IC (Industry Canada)
Product Usage Instructions:
Regulatory Module Integration
The SBC module has been granted modular approval for GEA LCD
products. OEM integrators must adhere to the following
conditions:
-
The host product with the module must be evaluated for
simultaneous transmission requirements. -
The user’s manual must clearly indicate operating requirements
for compliance with FCC / IC RF exposure guidelines. -
Use the module only with the included onboard antenna to comply
with regulations. -
A label with specific information must be affixed to the host
product.
Device Classifications
Follow guidelines on device classification and simultaneous
transmission. Seek guidance from a regulatory test lab to ensure
compliance and minimize delays.
FCC Definitions
The module has not been approved for simultaneous transmission.
Any such condition must be evaluated based on specific
requirements.
FAQ:
Q: Can I use the module without additional FCC/IC
certification?
A: Yes, if the host product meets the specified conditions for
modular approval as outlined in the user manual.
Q: What should be included in the label on the host
product?
A: The label should contain the Product Name, FCCID, and IC
information as provided in the user manual.
“`
Regulatory Module Integration Instructions
SBC001 is highly integrated single module which features a low power 2×2
11a/b/g/n/ac dualband Wi-Fi subsystem and a Bluetooth subsystem. The Wi-Fi
subsystem contains the 802.11a/b/g/n/ac radio, baseband, and MAC that are
designed to meet both the low power and high throughput application. SBC001
has a 32-bit RISC MCU that handles Wi-Fi and Bluetooth tasks. The Bluetooth
subsystem contains the Bluetooth radio, baseband, link controller. It also
uses the 32-bit RISC MCU for the Bluetooth protocols.
The SBC (Sigle Board Computer) module has been granted modular approval for
GEA LCD products including this Wi-Fi/Bluetooth module. OEM integrators for
host products may use the module in their final products without additional
FCC / IC (Industry Canada) certification if they meet the following
conditions. Otherwise, additional FCC / IC approvals must be obtained.
The host product with the module installed must be evaluated for simultaneous
transmission requirements.
The user’s manual for the host product must clearly indicate the operating
requirements and conditions that must be observed to ensure compliance with
current FCC / IC RF exposure guidelines.
To comply with FCC / IC regulations limiting both maximum RF output power and
human exposure to RF radiation, use this module only with the included onboard
antenna.
A label must be affixed to the outside of the host product with the following
statements: Product Name: Android Board for GEA LCD products Contains FCCID:
ZKJ-SBC001 Contains IC: 10229A-SBC001
The final host / module combination may also need to be evaluated against the
FCC Part 15B criteria for unintentional radiators in order to be properly
authorized for operation as a Part 15 digital device.
Device Classifications
Since host devices vary widely with design features and configurations module
integrators shall follow the guidelines below regarding device classification
and simultaneous transmission, and seek guidance from their preferred
regulatory test lab to determine how regulatory guidelines will impact the
device compliance. Proactive management of the regulatory process will
minimize unexpected schedule delays and costs due to unplanned testing
activities.
The module integrator must determine the minimum distance required between
their host device and the user’s body. The FCC provides device classification
definitions to assist in making the correct determination. Note that these
classifications are guidelines only; strict adherence to a device
classification may not satisfy the regulatory requirement as near-body device
design details may vary widely. Your preferred test lab will be able to assist
in determining the appropriate device category for your host product and if a
KDB or PBA must be submitted to the FCC.
Note, the module you are using has been granted modular approval for mobile
applications. Portable applications may require further RF exposure (SAR)
evaluations. It is also likely that the host / module combination will need to
undergo testing for FCC Part 15 regardless of the device classification. Your
preferred test lab will be able to assist in determining the exact tests which
are required on the host / module combination.
FCC Definitions
Portable: (§2.1093) — A portable device is defined as a transmitting device
designed to be used so that the radiating structure(s) of the device is / are
within 20 centimeters of the body of the user.
Mobile: (§2.1091) (b) — A mobile device is defined as a transmitting device
designed to be used in other than fixed locations and to generally be used in
such a way that a separation distance of at least 20 centimeters is normally
maintained between the transmitter’s radiating structure(s) and the body of
the user or nearby persons. Per §2.1091d(d)(4) In some cases (for example,
modular or desktop transmitters), the potential conditions of use of a device
may not allow easy classification of that device as either Mobile or Portable.
In these cases, applicants are responsible for determining minimum distances
for compliance for the intended use and installation of the device based on
evaluation of either specific absorption rate (SAR), field strength, or power
density, whichever is most appropriate.
Simultaneous Transmission Evaluation
This module has not been evaluated or approved for simultaneous transmission
as it is impossible to determine the exact multi-transmission scenario that a
host manufacturer may choose. Any simultaneous transmission condition
established through module integration into a host product must be evaluated
per the requirements in KDB447498D01(8) and KDB616217D01,D03 (for laptop,
notebook, netbook, and tablet applications).
These requirements include, but are not limited to:
Transmitters and modules certified for mobile or portable exposure conditions
can be incorporated in mobile host devices without further testing or
certification when:
The closest separation among all simultaneous transmitting antennas is >20 cm,
Or
Antenna separation distance and MPE compliance requirements for ALL
simultaneous transmitting antennas have been specified in the application
filing of at least one of the certified transmitters within the host device.
In addition, when transmitters certified for portable use are incorporated in
a mobile host device, the antenna(s) must be >5 cm from all other simultaneous
transmitting antennas.
All antennas in the final product must be at least 20 cm from users and nearby
persons.
Contact info for above certified FCC: Company Name: Haier US Appliance
Solutions, Inc. Contact Name: Jeff Drake Address: Appliance Park AP5-2N-65,
Louisville, KY 40225, United States Telephone No:
+1-502-452-5135 Email:
jeff.drake@geappliances.com
OEM Instruction Manual Content
Consistent with §2.909(a), the following text must be included within the
user’s manual or operator instruction guide for the final commercial product
(OEM-specific content is displayed in italics.)
Operating Requirements and Conditions:
The design of (Product Name) complies with U.S. Federal Communications
Commission (FCC) guidelines respecting safety levels of radio frequency (RF)
exposure for Mobile devices.
Note: In the case where the Host / Module combination has been re-certified
the FCCID shall appear in the product manual as follows:
FCCID: (Include Standalone FCC ID)
Mobile Device RF Exposure Statement (If Applicable):
RF Exposure – This device is only authorized for use in a mobile application.
At least 20 cm of separation distance between the transmitting antenna device
and the user’s body must be maintained at all times.
Caution Statement for Modifications:
CAUTION: Any changes or modifications not expressly approved by GE Appliance
could void the user’s authority to operate the equipment.
FCC Part 15 Statement (Only Include if FCC Part 15 is Required on the End
Product):
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. (OEM must follow
Part 15 guidelines (§15.105 and §15.19) to determine additional statements
required in this section for their device class)
Note 2 : This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions. 1) This device may not cause harmful
interference, and 2) This device must accept any interference received,
including interference that may cause undesired operation.
a. That module is limited to OEM installation ONLY. b. That OEM integrators
are responsible for ensuring that the end-user has no manual instructions to
remove or install module. c. That module is limited to installation in mobile
or fixed applications, according to Part 2.1091(b). d. That separate approval
is required for all other operating configurations, including portable
configurations with respect to Part 2.1093 and different antenna
configurations. e. That grantee shall provide guidance to the host
manufacturer for compliance with Part 15 subpart B requirements.
This device complies with Industry Canada’s license-exempt RSSs. Operation is
subject to the following two conditions: (1) This device may not cause
interference; and (2) This device must accept any interference, including
interference that may cause undesired operation of the device.
Information Le présent appareil est conforme aux CNR d’Industrie Canada
applicable aux appareils radio exempts de licence. L’exploitation est
autorisée aux deux conditions suivantes : (1) l’appareil ne doit pas produire
de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout
brouillage radioélectrique subi, même si le brouillage est susceptible d’en
compromettre le fonctionnement.
Cet équipement est conforme aux limites d’exposition aux rayonnements énoncées
pour un environnement non contrôlé et respecte les règles les radioélectriques
(RF) de la FCC lignes directrices d’exposition et d’exposition aux frequencies
radioélectriques (RF) CNR-102 de l’IC. Cet équipement émet une énergie RF très
faible qui est considérée conforme sans évaluation du débit d’absorption
spécifique (DAS).
This device is restricted to indoor use only within the 5.15~5.25GHz band.
(Canada)
Cet appareil est restreint à l’utilisation à l’intérieur seulement dans la
bande 5.15 ~ 5.25GHz.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>