NPE78846E8b Noble Pro E8.0 User Manual

NPE78846E8b-Noble-Pro-E8-0-FEATURED-IMAGE

Specifications:

• Max User Weight: 135 kg
• Dimensions (LxWxH) Folded: 130 x 86 x 153cm, Unfolded: 188 x 86 x 143cm
• Running Area: 150 x 52cm / 59 x 20.5 inches
• Speed Range: 1.0-20 km/h
• Incline Levels: 0-20
• Machine Weight N.W.: 105kg / G.W. 115kg

Product Usage Instructions

About the Product:
The treadmill consists of various parts including the tray, upright foot rail, walking belt, screen console, handrails, power switch, and belt adjustment screws. Before using the treadmill, familiarize yourself with these parts.

Assembly:

1. Register your product by visiting noblepro.com/product-registration.
2. Download the latest User’s Manual from noble-pro.com/support.

Important Precautions:
Before using the treadmill, read all precautions and instructions in the manual. Ensure to save the manual for future reference. Some important precautions include:

• Avoid over-exercising to prevent serious injury or death.
• Always unplug the power cord after use and before cleaning or performing maintenance.
• Do not insert objects into any openings on the treadmill.

Maintenance:
Inspect and properly tighten all parts of the treadmill regularly to ensure safe usage. When folding or moving the treadmill, ensure that the storage latch securely holds the frame in place.

Power Cord and Surge Suppressor:
Plug the power cord into a surge suppressor and then into an appropriate outlet. Avoid overloading the circuit by not plugging other electrical devices into the surge suppressor or outlet on the same circuit.

FAQ:

• Where can I find the serial numbers of the treadmill base and screen?
  The serial number for the treadmill base is located on the front, while the serial number for the treadmill screen is located on the back of the respective components.

• What should I do if I experience discomfort while using the treadmill?
  If you feel faint, short of breath, or experience pain while exercising, stop immediately and seek medical attention if needed.

• How should I clean the treadmill?
  Before cleaning, always remember to unplug the power cord. Use a damp cloth with mild detergent to wipe down the surfaces. Avoid using harsh chemicals that may damage the equipment.

USER’S MANUAL

noble-pro.com

Treadmill Base
Model No: NPE78846E8b Serial No: __
Locate the serial number on the front of the treadmill base.

Treadmill Screen
Model No: NPE78847E8s
Serial No: __
Locate the serial number on the back of the treadmill screen.

CUSTOMER CARE

For technical support, please

visit:noble-pro.com/help

CAUTION
Read all precautions and instructions in this manual before using this equipment. Save this manual for future reference.

WARNING LABELS

IMPORTANT PRECAUTIONS

WARNING: To reduce the risk of burns, fire, electric shock, or injury to persons, read all IMPORTANT precautions and instructions in this manual and all warnings on your treadmill before using the treadmill. NoblePro Ltd assumes no responsibility for personal injury or property damage sustained by or using this product.

1. It is the owner’s responsibility to ensure that all users of this treadmill are accurately informed of all warnings and precautions.

2. Before beginning any exercise program, consult your physician. This is IMPORTANT for persons over age 35 or persons with pre-existing health conditions.

3. Use the treadmill only as prescribed in this manual.

4. The treadmill is intended for home-use only. Do not use the treadmill in any commercial, rental or institutional setting.

5. Keep the treadmill in a secure, dry, well-ventilated area (above 5 °C) away from moisture and dust. Do not put the treadmill outside, under a covered patio or near water.

6. Place the treadmill on a level surface, with at least 8 ft. (2.4 m) of clearance behind it and 2 ft. (0.6 m) on either side. Do not place the treadmill on any surface that blocks air openings. To protect the floor or carpet from damage, place a mat under the treadmill.

7. Always keep pets and children under age 12 away from the treadmill.

8. The treadmill should be used only by persons weighing 297 lbs (135 kg) or less.

9. Never allow more than one person on the treadmill at a time.

10. Wear appropriate activewear and trainers while using the treadmill. Be aware that loose clothing could become caught on the treadmill. Never use the treadmill with bare feet, only socks or sandals.

11. Keep fingers, hair and clothing away from the moving walking belt.

12. Do not operate the treadmill where aerosol products are used or where oxygen is being administered.

13. Plug the power cord into a surge suppressor (not included) and plug the surge suppressor into an appropriate outlet. To avoid overloading the circuit, do not plug other electrical devices into the surge suppressor or an outlet on the same circuit (low-power devices such as phone chargers will not cause an issue).

14. Use only a surge suppressor / circuit breaker that meets all the specifications in this manual. Failure to use a properly functioning surge suppressor could result in damage to the control system of the treadmill. If the control system is damaged, the walking belt may slow, accelerate, or stop unexpectedly, resulting in a fall and severe injury.

15. Keep the power cord and the surge suppressor away from heated surfaces.

16. Never try to move the walking belt while the power is turned off. Do not operate the treadmill if the power cord or plug is damaged or if the treadmill is not working properly. (See MAINTENANCE AND TROUBLESHOOTING if there are issues with the treadmill.

17. Read, understand, and test the emergency stop procedure before using the treadmill (see HOW TO TURN ON THE POWER). Always wear the safety clip while using the treadmill.

18. Always stand on the side rails when starting or stopping the walking belt. Always hold the handrails while using the treadmill
    Note : When a person is walking on the treadmill, the treadmill’s noise level will increase.

19. To avoid static shock, wear natural fabrics. If there is a build-up of static, check that the plug and electrics are earthed correctly.

20. The treadmill is capable of high speeds. Adjust the speed in small increments to avoid sudden surges in speed.

21. The heart rate monitor is NOT a medical device. Various factors, including the user’s movement, may affect the accuracy of heart rate readings. The heart rate monitor is intended only as an exercise aid in determining general heart rate trends.

22. Never leave the treadmill unattended while it is running. Always remove the safety key, press the red power switch into the off position, and unplug the power cord when the treadmill is not in use.

23. Do not attempt to move the treadmill until it is fully assembled. (See ASSEMBLY and HOW TO FOLD AND MOVE THE TREADMILL.) You must be able to safely lift 45 lbs. (20 kg) to raise, lower, or move the treadmill.

24. When folding or moving the treadmill, make sure that the storage latch is holding the frame securely in the storage position

25. Do not insert any objects into any openings on the treadmill.

26. Inspect and properly tighten all parts of the treadmill regularly.

27. Over-exercising may result in serious injury or death. If you feel faint if you become short of breath or experience pain while exercising, please stop immediately.

28. DANGER: Always unplug the power cord immediately after use, before cleaning the treadmill and before performing the maintenance and adjustment procedures described in this manual. Never remove the motor cover unless instructed to do so by an authorized NoblePro Ltd representative. Additional servicing, other than the procedures in this manual, should be performed by an authorized service representative only.

ABOUT THE PRODUCT

Thank you for selecting the revolutionary NoblePro® E8.0 treadmill. The NoblePro® E8.0 treadmill offers an impressive selection of features designed to make your workouts at home more effective and enjoyable. When not exercising, the treadmill can be folded up which then requires less than half the floor space of other treadmills.

For your benefit, read this manual carefully before using the treadmill. If you have questions after reading this manual, please see the front cover of this manual. To help us assist you, please make a note of the product model number before contacting us. Before reading further, please review the drawing below and familiarize yourself with the labelled parts.

Unfolded: 188 x 86 x 143cm
Running Area| 150 x 52cm / 59” x 20.5”
Speed Range| 1.0-20km/h
Incline levels| 0-20
Machine Weight| N.W.: 105kg / G.W. 115kg

Box content

Assembly kit

ASSEMBLY

ATTENTION

• Assembly requires two persons
• Assemble in a clean and level area
• Before assembly take parts out but do not dispose of any material until complete
• Avoid using power tools
• Left parts are marked as “L”. Right parts are marked as “R”
• The treadmill might be covered by light oil to preserve it from rusting

1. Register your product. Go to noble-pro.com/product-registration

2. Download the latest User’s Manual from noble-pro.com/support
   Note: If you are unable to register online, please submit a technical ticket with NoblePro technical support for assistance at noble-pro.com /technical-support-request/

3. Identify the signal wire (163) located in the base frame (93). Feed the wire through the base frame hole as indicated (1) Next, identify the right upright post (161). Have a second person hold the right upright post close to the base frame. (2)
   Then, insert the signal wire into the right upright post while pulling the upper end of the wire tie. (3)
   Place the right upright post into the base frame. Make sure not to pinch any wires.

4. Loosely fasten the right upright post by using 2 x M1045 (164) and 2 x M1030 (167) screws with a flat washer (166) to the base frame.
   Place the left upright post into the base frame. Then loosely fasten the post using 2 x M1045 (164) and 2 x M1030 (167) screws with a flat washer (166) to the base frame.

5. Locate the console signal wire (C) at the back of the Console on the right side of the console frame. Connect the signal wire (C) to the communication wire (163). Place the console frame over the uprights. Note : Be careful not to crush the wire; it should be clear of edges.

6. Use 6 x M10*20 (187) screws with flat washer (189) to fasten the posts to the console. Fasten lightly until all screws are aligned before tightening all screws in step 4 and 6.

7. Feed the screen connection wires (A, B and C) through the hole in the mounting bracket (1).
   Use 4 x M5*10 (8) screws to fasten the screen to the mounting bracket.

8. Place the screen on the console. Connect console wires to the screen wires. Connect A to A, B to B and C to C respectively.

9. Use 2 x M8*16 (182) screws with flat washers (183) to fasten the screen to the console.

10. Use 2 x St 4.2*13 (234) screws to fasten the screen cover panel to the back of the screen.

11. Place the base frame covers (123/124) in place.
    Use the 4 x ST 4.2*13 (125) screws to fasten the covers to the base frame.

12. Remove the lock device holding the base frame to the running frame.

13. It is imperative to ensure that all parts are tightened before using the treadmill. It is advisable to place a protective mat under the treadmill and not onto a slippery, uneven surface
    Information: The tools provided can also be used to on maintenance of the treadmill.

HOW TO USE THE TREADMILL

CONNECTING THE POWER CORD
Use a Surge Suppressor
The treadmill can be damaged by sudden voltage changes in your home’s power. Voltage surges, spikes, and noise interference can result from weather conditions or other appliances being turned on or off.

To decrease the risk of damaging the treadmill, use a surge suppressor that complies with or exceeds UL 1449 or BS 1363 requirements. The surge suppressor must be electrically rated for 240 volts AC and a minimum of 13 amps. Failure to use a properly functioning surge suppressor could result in damage to the control system of the treadmill and serious injury to users.

Plug in the power cord The treadmill must be grounded. If it should malfunction or break down, grounding provides a path of least resistance for electric current this is to reduce the risk of electric shock. Plug the power cord into a surge suppressor and plug the surge suppressor into an appropriate outlet that is properly installed and grounded in accordance with all local rules and regulations. The outlet must be on a nominal 240-volt circuit capable of carrying 16 or more amps. To avoid overloading the circuit, do not plug other electrical devices, except for low power devices such as cell phone chargers, into the surge suppressor or an outlet on the same circuit.

HOW TO TURN ON THE POWER

IMPORTANT: If the treadmill has been exposed to cold temperatures, allow it to warm to room temperature before you turn on the power. If you do not do this, you may damage the console displays or other electrical components.
Plug in the power cord. Next, locate the power switch on the treadmill frame near the power cord. Press the power switch into the “on” position.

HOW TO USE THE SAFETY KEY
The safety key is a designed to bring the treadmill to a stop. Insert the key into the console as indicated and securely attach the clip to your clothing.
IMPORTANT : The treadmill will not function without the safety key being placed in the console.

HOW TO USE THE CONSOLE Quick Controls USING THE TREADMILL HANDGRIP HEART RATE MONITOR
The treadmill has built in handgrip heart rate monitors so please ensure to remove the protective plastic from the handgrips before use. For the most accurate heart rate reading stand on the handrails and avoid movement for 15 seconds or more.

IMPORTANT : Read HOW TO TURN ON THE POWER (see page 11) DANGER: Stand on side rails when starting the treadmill

START

1. Press the START button and the belt will start to move.

   • As you exercise, change the speed of the walking belt as desired by using the SPEED +/-buttons. Each time you press one of the buttons, the speed setting will change by 0.1 km/h; if you hold down the button, the speed setting will change rapidly.
     Note: After you press the button, it may take a moment for the walking belt to reach the selected speed setting.

   • If you press one of the numbered speed buttons, the walking belt will gradually change speed until it reaches the selected speed setting. To select a speed setting that includes a decimal—such as 3.1 km/h—press two numbered buttons in succession. For example, to select a speed setting of 3 km/h, then immediately press button 5.

   • To stop the walking belt, press the STOP button. The time will begin to flash in the display. To restart the walking belt, press the START button or the Speed increase button.

2. Change the incline of the treadmill as desired. To change the incline of the treadmill, press the incline increase and decrease buttons or one of the numbered incline buttons. Each time you press one of the buttons, the treadmill will gradually adjust to the selected incline setting.

3. Measure your heart rate if desired. You can measure your heart rate using the handgrip heart rate monitor.

   • To measure your heart rate, stand on the side rails and hold the pulse bar with your palms on the metal contacts; avoid moving your hands. When your pulse is detected, a heart symbol will appear, and then your heart rate will be shown. For the most accurate heart rate reading, continue to hold the contacts for about 15 seconds.

4. When you are finished exercising, remove the safety key from the console. Step onto the side rails, press the STOP button, and adjust the incline of the treadmill to zero. The incline must be at zero or you may damage the treadmill. If the machine is turned off and you can still hear the motor it is the incline coming down, wait for the noise to stop before switching it off at the wall. It is now ready to be folded away in the storage position. Next, remove the key from the console and put it in a secure place. When you are finished using the treadmill, press the power switch into the off position and unplug the power cord. IMPORTANT: If you do not do this, the treadmill’s electrical components may wear prematurely.

TARGET DRIVEN PROGRAM
The NoblePro ® Elite 8.0 comes target driven training programs which allows users to define a time, distance or calories target for a session.

Target Time

1. Press the TRAINING PROG button until the time field starts flashing.
2. A default target time will flash. Use the SPEED +/- buttons to defined the target time for the session.
3. To start the session,
4. The session will automatically come to a safe stop once the target time has counted down to zero.
5. Measure your heart rate if desired. You can measure your heart rate using the handgrip heart rate monitor. See step 3 on page 13.
6. When you are finished exercising, remove the safety key from the console.

Target Distance

1. Press the TRAINING PROG button until the distance field starts flashing.
2. The target distance field will flash. Use the SPEED +/- buttons to defined the target distance for the session.
3. To start the session,
4. The session will automatically come to a safe stop once the target distance has been reached.
5. Measure your heart rate if desired. You can measure your heart rate using the handgrip heart rate monitor.
6. When you are finished exercising, remove the safety key from the console.

Target Calories

1. Press the TRAINING PROG button until the distance field starts flashing.
2. The target distance field will flash. Use the SPEED +/- buttons to defined the target calorie count for the session.
3. To start the session,
4. The session will automatically come to a safe stop once the target calories have been reached.
5. Measure your heart rate if desired. You can measure your heart rate using the handgrip heart rate monitor.
6. When you are finished exercising, remove the safety key from the console.

PREDEFINED TRAINING PROGRAMS
The NoblePro ® Elite 8.0 comes with several predefined training programs P01-P12. The programs can be selected using the Training Program or the quick selection buttons.

1. Selecting the pre-set program. Press the TRAINING PROG button and use the SPEED +/-buttons to select a program. The programs are graphically illustrated in Figure XX. Set the target time by using the SPEED +/- button.

2. Start the treadmill. Press the START button to start the workout. A moment after you press the button, the treadmill will automatically adjust to the first speed and incline settings of the workout. Hold the handrails and begin walking.
   If the speed or incline setting is too high or too low for your liking you can manually override the setting by pressing the SPEED+/- or INCLINE +/- buttons.

3. Measure your heart rate if desired. You can measure your heart rate using the handgrip heart rate monitor.

4. When you are finished exercising, remove the safety key from the console.

USER DEFINED TRAINING PROGRAMS
The NoblePro ® Elite 8.0 comes with several user defined training programs U01-U03.

1. Selecting the pre-set program.
   • Press the TRAINING PROG button and use the SPEED +/- buttons to select a program. The programs are graphically illustrated on the console next to the screen. Set the target time by using the SPEED +/- button.

TRAGET HEART RATE TRAINING PROGRAMS
The NoblePro ® Elite 8.0 comes with a target heart rate training program which will adjust the treadmill’s speed and incline to try match the user’s heart rate with the target heart rate range the user has entered.
Note : For this program to function the treadmill requires the user to use the heart rate pulse sensors or a compatible heart rate monitor to provide heart rate readings.

1. Selecting the pre-set program.
   • Press the TRAINING PROG button and use the SPEED +/- buttons to select a program. The programs are graphically illustrated on the console next to the screen. Set the target time by using the SPEED +/- button.

FAN CONTROL
The NoblePro Elite® E8.0 comes with a single speed fan. Press the FAN button to turn it on and off. We recommend the purchasing of a larger external fan if you are finding the room you are in is becoming too warm during exercise.

STEREO CONTROL
The stereo system comes with a SOUND ON/OFF button to enable the sound. Use Bluetooth or USB stick to play your desired audio format.

BLUETOOTH
The NoblePro® Elite E8.0 treadmill is fully Bluetooth FiTness Machine Service (FTMS) compatible. Download the NoblePro mobile app from the Google Play Store or App Store.

KINNI APP
To save workout history from your treadmill and have access to the latest features, use the Kinni app. Visit https://kinni.co

HOW TO FOLD AND MOVE THE TREADMILL

FOLDING THE TREADMILL
To avoid damaging the treadmill, adjust the incline to zero before you fold the treadmill. Then, remove the key and unplug the power cord.
CAUTION: You must be able to safely lift 45 lbs. (20 kg) to raise, lower, or move the treadmill.

1. Hold the end covers firmly in the location shown by the arrow below.
   CAUTION: Do not hold the frame by the plastic side rails. Bend your legs and keep your back straight.

2. Raise the frame until the kicker locks in the storage position.
   CAUTION: Make sure that the kicker locks. To protect the floor or carpet, place a mat under the treadmill. Keep the treadmill out of direct sunlight. Do not leave the treadmill in the storage position in temperatures above 30° C.

LOWERING THE TREADMILL

1. Push the upper end of the frame forward, and gently press the upper part of the kicker with your foot at the same time.
2. While pressing the kicker with your foot, slowly lower frame slightly.
3. Step back and let the frame slowly lower to the floor by itself.

MOVING THE TREADMILL

1. Put the treadmill in the folded position before attempting to move it. Push firmly down on the transportation wheel lever until you hear it lock.
   CAUTION : Make sure that the locking latch is locked in the storage position. Moving the treadmill may require two people. Hold the handrails with both hands and carefully push the treadmill to the desired location.

2. Using both hands hold onto the handle bars move the treadmill on the transportation wheels. CAUTION: Do not pull on the frame, and do not move the treadmill over an uneven surface.

MAINTENANCE

For more information on maintaining your treadmill go to noble- pro.com/maintenance/

CLEANING
Regularly clean the treadmill and keep the walking belt clean and dry. First, press the power switch into the “OFF” position and unplug the power cord. Wipe exterior parts of the treadmill with a damp cloth and a small amount of mild soap.

IMPORTANT: Do not spray liquids directly onto the treadmill. To avoid damage to the Console, keep liquids away from the Console. Then, thoroughly dry the treadmill with a soft towel.

BELT LUBRICATION
The walking belt is lubricated with a high-performance silicone lubricant to reduce the friction between the walking belt and the running board. If the lubrication is inadequate, the belt will not operate smoothly. Remove the safety key and UNPLUG THE POWER CORD. Run your finger along the underside of the belt. If there is no lubricant residue on your finger’s lubrication is needed.

To add lubrication to the walking belt. Remove the key and UNPLUG THE POWER CORD. Lift the walking belt in the centre of the running board. Add 15 ml of treadmill silicone lubricant on both sides of the walking belt as close to the belt’s centre as possible. Turn the treadmill on using easy start mode and let it run for 10 mins at 12 km/h. Repeat the process until there is an even film of lubricant on the walking belt. IMPORTANT: Excessive lubrication might result in the walking belt or transition belts slipping and loss of drive.

ADJUSTING THE WALKING BELT

If the walking belt is off centre, remove the safety key and UNPLUG THE POWER CORD.

If the walking belt has shifted to the left (viewed from the back), use the 6mm hex key to turn the left idler roller screw clockwise ½ a turn; if the walking belt has shifted to the right (viewed from the back), turn the right idler roller screw counter clockwise ½ a turn.

Then, plug in the power cord, insert the safety key and run the treadmill for a few minutes. Repeat until the walking belt is centred. CAUTION: Be careful not to overtighten the walking belt as it might reduce the bearings’ longevity.

TIGHTENING OF THE WALKING BELT If the walking belt slips when walked on, first remove the key and UNPLUG THE POWER CORD.
Using the 6 mm hex key, turn both idler roller screws a ¼ of a turn clockwise at a time until you can lift each edge of the walking belt 3 to 4 inches (8 to 10 cm) off the walking board.

Be careful to keep the walking belt centred. Then, plug in the power cord, insert the safety key, and carefully walk on the treadmill for a few minutes. Repeat until the walking belt is sufficiently tightened.

LOOSENING THE WALKING BELT
IMPORTANT: If the walking belt is overtightened, treadmill performance may decrease, and the walking belt and bearings might become damaged.

To loosen the walking belt, first, remove the key and UNPLUG THE POWER CORD. Then using the hex key, turn both idler roller screws a ¼ a turn counter clockwise at a time until you can lift each edge of the walking belt 3 to 4 inches (8 to 10 cm) off the walking board. Be careful to keep the walking belt centred. Then, plug in the power cord, insert the safety key and run the treadmill for a few minutes. Repeat until the walking belt is properly tightened.

TROUBLESHOOTING

position
E Blown fuse| Replace the fuse
Console screen does not display anything| A The power cord is not connected| Connect the power cord and check the socket
B The power switch is on the “OFF” position| Turn the power switch to the “ON” position
C Power overload or damaged driver| Push the overload protection button. Replace the driver
D Communication cable faulty| Replace the communication cable
E Digital watch is damaged| Replace the digital watch
F (LCD) backlight is not bright| Replace or repair backlight
Treadmill display is missing characters| A An issue with the display connections| Repair or replace display
B The display is not fixed in position and sliding around| Repair or replace display
C Faulty display driver IC| Repair or replace display driver IC
Treadmill walking belt not moving smoothly| A Excessive resistance on transmission system| Adjust the transmission parts and / or lubricate accordingly
B Walking belt it too tight| Loosen walking belt
C Walking belt is too loose| Tighten walking belt
D Torque requirements too small or too high| Adjust the torque potentiometer accordingly
E Lack of walking belt lubrication| Lubricate the walking belt as directed in the user manual
F Motor belt is slipping| Tighten the motor belt
Static shock| A Static electricity is not being earthed| Ensure the plug earth quality is good
B High static cloths used during exercise| Use natural material

clothing during exercise

Buzzing noise| A Plug power is out of phase| Inspect the plug outlet phase quality
B Incorrect voltage supply| Ensure the correct voltage is supplied to the treadmill
| Issue| Possible Causes| Solution
---|---|---|---
Error Codes| ****

Safety key

| A Missing safety key| Place the safety key in the

designated area

B Faulty magnetic sensor| The safety key magnetic sensor is stuck. Repair or replace magnetic sensor.

E01 & E13 –

Communication failure

| A Communication cable faulty| Reconnect the communication cables
B Damaged communication cable| Replace communication cable
C Communication cable connection faulty| Replace effected cables
D IC drive cable faulty| Replace the IC drive cable

E02 – Motor stalls

| A Loose motor connection cables| Check wire connections are tight or replace the motor
B Motor controller board faulty| Replace the IC drive
C External ac voltage is too low| Undertake electrical supply troubleshooting where the treadmill is

plugged in

E04 – Incline motor stalling

| A Faulty incline motor connection| Check wire connections are tight or replace the motor
B Faulty incline motor| Replace incline motor
C Faulty IC drive| Replace the IC drive

E05 & E10 – Over- current protection

| A Treadmill overloaded| Rotate the motor by hand and safely try again
B Excessive friction in driver motors| Inspect and maintain transmission components
C Motors damaged| Replace motor
D Motor controller damaged| Replace IC drive

E06 – Motor error

| A Motor cable connection faulty| plug machine line again
B Motor is shorting internally| change the motor
C Motor is idling| The motor current is too low. Replace the motor

EXPLODED DRAWING 1

EXPLODED DRAWING 2

PARTS LIST

No. Part| ****

Description

| ****

QTY

| No. Part| ****

Description

| ****

QTY

---|---|---|---|---|---
2| Base frame| 1| 126| Front wheel| 2
26| Motor base plate| 1| 127| Allen key M8×45 screw| 2
30| Motor| 1| 128| Washer Ø8×2.1| 2
31| Socket M8×16 bolt| 4| 129| Flat washer Ø8×1.6| 2
32| Socket M8×12 bolt| 2| 130| Nut M8| 2
33| Spring washer Ø8×2.1| 6| 131| Rubber pad| 4
34| Flat washer Ø8×1.6| 6| 133| Transportation wheel frame| 1
35| Socket M8×90 screw| 1| 134| Transportation wheel| 1
38| Motor cover| 1| 135| Transportation wheel shaft| 1
39| Motor cover insert| 1| 136| Elastic ring – type B trunnion 8 (shaft)| 1
40| Motor cover insert| 1| 137| Transportation lever| 1
41| Motor cover insert| 1| 140| Socket M10×55 bolt| 1
46| Plug with switch| 1| 141| Torsional spring| 1
49| Power cord with plug| 1| 142| Flat washer Ø10×2| 2
52| IC Driver| 1| 143| Nut M10| 1

55

| ****

4 cores wire

| ****

1

| ****

146

| ****

Height adjusting pad

| ****

2

56| Incline motor| 1| 151| Storage cylinder (775×500-

45KG）

| 1
57| Socket M10×45 bolt| 1| 152| Allen key M8×35 screw| 1
58| Flat washer Ø10×2| 2| 153| Allen key M8×50 screw| 1
59| Nut M10| 1| 154| Nut M8| 2
60| Running board| 1| 155| Flat washer Ø8×1.6| 4
61| Shock absorber| 2| 158| Left post| 1
62| Shock absorber| 1| 161| Right post| 1
63| Shock absorber| 1| 163| Communication cable| 1
65| Rubber pad| 2| 164| Allen key M10×45 screw| 4
66| Philips countersunk head screw M8×25| 4| 165| Spring washer Ø10×2.5| 8
67| Philips countersunk head screwM8×35| 2| 166| Flat washer Ø10×2| 8
No. Part| ****

Description

| ****

QTY

| No. Part| ****

Description

| ****

QTY

---|---|---|---|---|---
69| Front roller| 1| 167| Allen key M10×30 screw| 4
70| Socket M8×60 bolt| 1| 169| Monitor console base| 1
71| Flat washer Ø10×2| 2| 182| Allen key M8×16 screws| 2
72| Motor belt| 1| 183| Flat washer Ø8×1.6| 2
73| Running belt| 1| 187| Allen key M10×20 screw| 6
74| Guiding hook| 2| 188| Spring washer Ø10×2.5| 6
77| Left side rail| 1| 189| Washer Ø10×2| 6
78| Right side rail| 1| 210| Monitor front cover| 1
79| Side rail buckle| 8| 211| Monitor display board (fans）| 1
81| Rear roller| 1| 213| Square speaker| 2
82| Socket M8×60 screw| 2| 215| Monitor back cover| 1
83| Flat washer Ø8×1.6| 2| 219| Monitor fans|
84| Left end cap| 1| 225| Monitor console up cover| 1
85| Right end cap| 1| 226| Monitor up PCB board| 1
88| Rear wheel| 2| 228| Left cup| 1
89| Allen key M8×45 screw| 2| 229| Right cup| 1
90| Nut M8| 2| 231| Monitor console bottom cover| 1
91| Flat washer Ø8×1.6| 4| 233| Monitor back cover| 1
93| Frame holder| 1| 239| Left arm| 1
120| Socket M10×65 bolt| 1| 241| Right arm| 1
121| Flat washer Ø10×2| 2| 243| Safety key| 1
122| Nut M10| 1| A| 6 cores wire| 1
123| Left side cover| 1| B| 4 cores wire| 1
124| Right side cover| 1| C| 6 cores wire| 1
125| ST4.2×13| 6| | |

ORDERING REPLACEMENT PARTS

To order replacement parts, please see the front cover of this manual. To help us assist you, be prepared to provide the following information when contacting us:

• The model number and serial number of the product
• The name of the product (see the front cover of this manual)
• The part number and description of the replacement part(s) (see the PART LIST and the EXPLODED DRAWINGS pages 22-25)

WARRANTY

Offered by NOBLEPRO LIMITED (“NoblePro”)

All NoblePro products are warrantied for use within a private, domestic, non- fee-paying environment. The warranties are non-transferable as they are only valid for the original owner (purchaser) of the equipment. The warranty will not apply if the product is used other than domestic use, is not operated according to the operating manual supplied or the product leaves the United Kingdom.

The warranties are subject to the product been used as intended and maintained and serviced as prescribed. Abuse or inappropriate use of the product will be excluded from the warranty.

NoblePro warrants this product to be free from defects in workmanship and material.
The STANDARD WARRANTY is for a period of 12 months, if not registered. The STANDARD WARRANTY includes the frame of the equipment in question with its motor. The labour applicable here is also included.
When the product is purchased it needs to be registered online at noble- pro.com/product-registration within 30 days after purchase to qualify for the EXTENDED

WARRANTY. For further information about your warranty, please go to noble-pro.com/warranty/.

All repairs or replacements needs to be authorized by NoblePro. NoblePro will not reimburse for any transport or courier service and will arrange for the product to be collected either by NoblePro or a third party. The warranty is related to the delivery address of the client and additional collection and delivery fees may be applicable due to the extended distance. The client consents to NoblePro doing an assessment of the product and repair it if required, on the premises where the product is located.

The client or any other party may not conduct any repair work on the machine other than the normal service and maintenance as per the operating manual supplied. The warranty specifically excludes cases where the product was altered, modified, damaged or repaired by any party other than NoblePro. The warranty does not cover damaged caused by fire, lightning, accidents, water damage (including humidity), pollution (such as fumes, dust and chemicals) or earth quakes.

The process to act on the warranty includes the notification of NoblePro which include the nature of the problem encountered and the serial number of the equipment. If it is a minor repair NoblePro may guide the client to rectify the matter. A call charge will be levied to collect and deliver the product but if the product was identified with a defect, this charge will be reimbursed about when the product is fixed and delivered back to the customer.

NoblePro has the right to replace the product with a similar product in terms of condition and specifications of the product sold to the customer. NoblePro is not responsible or liable for any expense, liability, loss, or proceeding whatsoever in respect of any personal injury related to the equipment or any damages, economic loss including loss of revenue, loss of enjoyment or training or any other consequential damages that are permitted by law.

References

• NoblePro® – Specialist Elite Treadmills
• Technical Support
• NoblePro Maintenance | Maintenance schedule
• Technical Support
• NoblePro | Warranty
• Kinni

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>