kingminson CP02 USB-A Wireless Car Screen Projection Adapter User Manual

kingpins CP02 USB-A Wireless Car Screen Projection Adapter

Product Information

Specifications:

• Accessory Name: USB-A Wireless Car Screen Projection Adapter
• Model Number: CP02

Product Usage Instructions

1. Connecting the Adapter:
   To use the USB-A Wireless Car Screen Projection Adapter, first, ensure your car’s infotainment system is compatible with wireless projection. Locate the USB port in your car and insert the adapter securely.

2. Pairing with Devices:
   Turn on the car’s ignition and activate the wireless projection feature on your smartphone or other compatible device. The adapter should appear in the list of available devices for pairing. Select it to establish a connection.

3. Screen Projection:
   Once connected, you can start projecting your device’s screen onto the car’s display. Navigate through your device’s content, such as apps, videos, and music, directly on the car screen.

4. Disconnecting the Adapter:
   To disconnect the adapter, simply turn off the wireless projection feature on your device or remove the adapter from the USB port in the car.

FCC Caution:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with a minimum distance between 20cm of the radiator and your body: Use only the supplied antenna.

Compatibility Note
Please make sure your car supports wired carplay/Android Auto

• Required iPhone6 or later iPhone models with I0S 10 or above for wireless carplay function
• Required an Android smartphone that supports the latest Android

Auto function and with Android 11 or higher of the Android operating system for wireless Android Auto function.

How to confirm if your car has Apple wired CarPlay or Android Auto function

1. Method 1: Connect your iPhone or Android smartphone to your car by USB data cable and see carplay or Android auto logo on your car display
2. Method 2: Check the compatible list below or check with your car manufacturerto see if your car has this capability: Check out the website for supported car models
   • https://www.apple.com/ios/carplay/available-models/
   • https://www.android.com/auto/Compatibility#Compatibility-vehicles

How to use

1. Start the car and wait for the car head until the system is loaded
2. Connect the Wireless Carplay Android auto adapter to the USB-A or USB-C port in your car. Please be sure to plug the adapter into the port that is for wired apple carplay or Android auto.
3. Open WIFI and Bluetooth on your iPhone/Android smartphone and find the Bluetooth named “Car-Paly-“, Click on Pair; Click on ‘Allow’; Click on Use Carplay or ‘Use Android Auto’
4. You are ready to enjoy wireless carplay or wireless Android Auto.

LED Light Description

• Cyan status: Power on indicator
• Green status:

1. Carplay connecting(green light fast flashing)
2. Carplay connected(green light slow flashing)

• Blue status:

1. Android connecting(Blue light fast flashing)
2. Android connected(Blue light slow flashing)

Please note

1. The wireless Carplay Android Auto adapter working principle uses Bluetooth to establish a pairing between the iPhone/ Android smartphone and the vehicle, then switches to using WiFi to maintain the wireless connection After the Bluetooth pairing is successful, the iPhone/Android smartphone WiFi will automatically connect to the adapter’s WiFi, and then disconnect the Adapter Bluetooth connection by default for carplay and automatically connect to your vehicle Bluetooth by default for Android Auto.
2. Please ensure the wireless Carplay AAndroidauto Adapter power indicates blue light is on.
3. Please ensure that your car models support wired carplay/Android auto

Package list

• 1 wireless Android Auto Adapter
• 1 xUSB-A or USB-C OTG Adapter
• 1 user Manual

Online update

• the adapter works properly, which means the current version is suitable for your car. It is not recommended to update the firmware
• Only try this solution when the problem you cannot solve from the “FQA”

1. Power up the adapter
2. Connect the adapter ‘s WiFi the password is” 12345678 “
3. Openthee b browser and enter” 192.168.1.11″ to the setting page and click ” Online Update “for Cathe r play function
4. For Android Auto, Please Click” Switch P2P” Then Click”OK”
5. Return to WiFi Connect, Find Wi-Fi Direct option , Then connect the Available devices(SmarlAdapter–) (This step is for reference only for Android phone users, if use an iphone update the firmware, please ignore the “Wi-Fi Direct step)
6. Return to the browser’s page Click” Update(PS: the signal light will flash when it reached70% , and it will return to 1a normal after successful
7. On the same page, you could also fill in the car brand, model, years, and more details. next tap “Submit 1a report the issue. Our engineers will record your problem and research possible solutions

Problem Description

• car Brand:
• M I:
• Year:
• Detailed description of the problem:

Please enter text here

Made in China

FAQ

Cannot find the bluetooth and Wi-Fi of the wireless Carplay Android Auto Adapter ?

Please make sure wireless Carplay Android auto adapter power indicates blue light is on and Be sure plug the adapter into the port that is for wired carplay/Android auto. If convenient , Please test it with another Phone. If only a specific phone cannot find the Bluetooth or Wi-Fi of the adapter please try to reset the network and bluetooth settings of this Phone and then restart the phone once , if the same problem happens on other Phone, It will be defective.please let us know.

Can the adapter be paired with multiple phones

The adapter can be palired with maximum five phones, but only one device can be connected at a time if you would like to pair it with a new phone , please cancel the current connection first Please note, by Bluetooth function default ,the adapter's system will only auto-connect back to the last used phone.

When use the wireless carp lay Android Auto Adapter whether Mobile Phone can use other internet wifi

When enjoying the wireless android auto adapter function, the phone's WiFi will be occupied by the adapter, So you can not use other internet at the same time, You only can use your phone SIM card internet.

The indicator light of the adapter is still on after the car is turned off.

we need to connect the bluetooth, not Wi-Fi.After Bluetooth matching is successful, WiFi will automatically connect.So no need Wi-Fi password. Make sure your Wi-Fi is turned on and unoccupied when pairing.

What is the WiFi password for the Wireless Carplay Adapter?

we need to connect the bluetooth,not Wi-Fi.After Bluetooth matching is successful,WiFi will automatically connect. So no need Wi-Fi password.Make sure your Wi-Fi is turned on and unoccupied when pairing.

After pairing Android Auto adapter, can not start Android Auto function or compatible can not recognize the USB …

1. If your car has use the android auto function for the first time,please use your date cable to connect your phone to activate android auto through a wired method
2. Please make sure that android auto on your android phone is the last version.If not,please log in to your google play account to update to the latest version.
3. Please tum off the Bluetooth of your phone and enter the mobile application management to search auto to clear the auto cache.After the cleaning is completed,Restart the adapter and reconnect to Bluetooth.

Unable to automatically reconnect
1 )Please make sure that the Bluetooth and WiFi functions of your mobile phone are turned on and the Bluetooth is not occupied when you get in the car
2)Clear the pairing record , restart the phone and repair the Adapter

Whether the Wireless Carplay Android auto Adapter support YouTube Video

1. Can not support Youtube for wireless carplay
2. Can support Youtube for wireless Android Auto.Please follow the operation Open Google Browser and type”AAADAPK”—-Download APK—-Open”AAAD” —-download”Carstream” –Open Carstream”go to setting and choose Enable desktop mode”after you can enjoy video from Youtube by wireless android auto Setting Video

link :https://www.youtube.com/watch?v=m8xHyEl9zXY

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>