UNV Display V1.00 LCD Monitor User Guide

September 29, 2024
UNV Display

V1.00 LCD Monitor

V1.00

Monitor Quick Guide

1 Packing List 

Please check the items in your package carefully. Contact your dealer if anything is  missing or damaged.

No.

|

Name

|

Qty

|

Unit

---|---|---|---

1

|

Monitor(base attached)

|

1

|

PCS

2

|

HDMI Cable

|

1

|

PCS

3

|

Quick Guide

|

1

|

PCS

4

|

Adapter

|

1

|

PCS

5

|

Screw(PM4x10mm)

|

1

|

PCS

2 Button Instruction 

SOURCE

|

Shows source channel menu.

---|---

DOWN

|

Adjust the option-move down or lower/Hot key(option).

UP

|

Adjust the option-move up or higher/Hot key(option).

MENU

|

Shows main choice menus.

|

Power on or off.

3 Interface 

4 Power Light 

  • Green (blue) : Turn on the machine.
  • Green (blue) Flash: Standby.
  • Green (blue) Off: Power Off.

5 MENU

The LCD monitor display unit has been adjusted to the best condition before shipment. You can also follow the instructions and steps below to adjust the image.

|

BRIGHTNESS

|

0-100

|

Backlight Adjustment

---|---|---|---

CONTRAST

|

0-100

|

Contrast from Digital-register

ECO

|

STANDARD

|

Standard Mode

RTS

|

RTS Mode

FPS

|

FPS Mode

TEXT

|

TEXT Mode

MOVIE

|

MOVIE Mode

GAME

|

GAME Mode

LOW BLUE

|

OFF

|

Disable low blue light

ON

|

Enable low blue light

DCR

|

OFF

|

Disable dynamic contrast ratio

ON

|

Enable dynamic contrast ratio

|

H.POSITION

|

0-100

|

Adjust the vertical/horizontal position of the picture

V.POSITION

|

0-100

CLOCK

|

0-100

|

Adjust picture Clock to reduce Vertical-Line noise

PHASE

|

0-100

|

Adjust picture Phase to reduce Horizontal-Line noise

ASPECT

|

WIDE OR 4:3

|

Select wide or 4:3 format for display

|

COLOR TEMP

|

COOL,WARM,USER

USER

|

RED

|

0-100

GREEN

|

0-100

BLUE

|

0-100

|

LANGUAGE

|

Select the OSD language

---|---|---

OSD H.POS

|

0-100

|

Adjust the vertical/horizontal  position of the MENU

OSD V.POS

|

0-100

OSD TIMER

|

5-60

|

Adjust the OSD Timeout

TRANSPARENCY

|

0-100

|

Adjust the transparency of OSD

|

IMAGE AUTO ADJUST

|

Default image resizing

COLOR AUTO ADJUST

|

Color adjustment to default value

RESET

|

Reset the menu to default

|

SIGNAL SOURCE

|

VGA/HDMI

|

Input port selection

FREE SYNC

|

OFF

|

Disable FREE SYNC

ON

|

Enable FREE SYNC

OVER DRIVE

|

OFF

|

Disable OVER DRIVE

ON

|

Enable OVER DRIVE

MPRT

|

OFF

|

Disable MPRT

ON

|

Enable MPRT

*Current operation will increase product energy consumption.

Do you want to continue?
Yes
NO

6 Troubleshooting 

1 No Image on Screen.

  • Check if the power button has been switched on.
  • Verify the brightness and contrast of the monitor is within the normal setting.
  • Check if the power indicator is flashing. If so this indicates that the monitor is not  receiving the input signal.
  • If the signal indicator is notebook or laptop, make sure that the signal has been  switched to screen mode.

2 Non-focus Image.

Check if the image signal cable is inserted properly(upright position).

3 Flash Screen.

  • The power is insufficient to connect the monitor or too weak.
  • To avoid magnetic field around the monitor, do not place these devices close to  it. Such as speakers, fluorescence lightings, AC transformer, table fan, and etc.
  • By pressing the Exit key, the Auto Adjust Image function will automatically apply  optimizes settings to the display.

4 Wrong or Unusual Colour.

  • If red,green, blue, or any of the colour disappears, check to see if the signal cord is  connected properly.
  • If the plug is loosely connected it might cause bad connection.
  • Try connecting to another PC for comparison.

5 The Whole Screen Appear Up and Down H-rolling Scan.

  • Make sure that the input signal frequency is within 55-76Hz.
  • Re-tighten the signal cable.

6 How to Clean the Monitor.

  • Make sure that the monitor power has been switched off.
  • Do not spray any liquid on the screen or the plastic panel directly.

7 When Cleaning the Screen.

Use clean, soft no fur materials to clean the screen.

If it is still dirty,do add a little of non-ammonia liquid and non-alcohol glass cleanser  to clean the screen.

8 When Cleaning the Plastic Panel.

Use soft dry cloth.
To add a little of non-ammonia liquid and non-alcohol of non-abrasion cleanser to  clean surface if it is still unclean.

7 Manufacturer and Importer

You can see the outside packing box for manufacturer and importer information.

Disclaimer and Safety Warnings

Copyright Statement

©2024 Zhejiang Uniview Technologies Co., Ltd. All rights reserved.

No part of this manual may be copied, reproduced, translated or distributed in any form or by  any means without prior consent in writing from Zhejiang Uniview Technologies Co., Ltd (referred  to as Uniview or us hereafter).

The product described in this manual may contain proprietary software owned by Uniview and  its possible licensors. Unless permitted by Uniview and its licensors, no one is allowed to copy,  distribute, modify, abstract, decompile, disassemble, decrypt, reverse engineer, rent, transfer, or sublicense the software in any form by any means.

Trademark Acknowledgements

 are trademarks or registered trademarks of Uniview. The terms HDMI, HDMI High-Definition Multimedia Interface, HDMI

Trade dress and the HDMI Logos are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.

All other trademarks, products, services and companies in this manual or the product described  in this manual are the property of their respective owners.

Export Compliance Statement

Uniview complies with applicable export control laws and regulations worldwide, including  that of the People’s Republic of China and the United States, and abides by relevant  regulations relating to the export, re-export and transfer of hardware, software and  technology. Regarding the product described in this manual, Uniview asks you to fully  understand and strictly abide by the applicable export laws and regulations worldwide.

EU Authorised Representative

UNV Technology EUROPE B.V. Room 2945, 3rd Floor, Randstad 21-05 G, 1314 BD, Almere,  Netherlands.

Privacy Protection Reminder

Uniview complies with appropriate privacy protection laws and is committed to protecting user  privacy. You may want to read our full privacy policy at our website and get to know the ways we  process your personal information. Please be aware, using the product described in this manual  may involve the collection of personal information such as face, fingerprint, license plate number,  email, phone number, GPS. Please abide by your local laws and regulations while using the  product.

About This Manual

  • This manual is intended for multiple product models, and the photos, illustrations,  descriptions, etc, in this manual may be different from the actual appearances, functions,  features, etc, of the product.
  • This manual is intended for multiple software versions, and the illustrations and descriptions  in this manual may be different from the actual GUI and functions of the software.
  • Despite our best efforts, technical or typographical errors may exist in this manual. Uniview  cannot be held responsible for any such errors and reserves the right to change the manual  without prior notice.
  • Users are fully responsible for the damages and losses that arise due to improper operation.
  • Uniview reserves the right to change any information in this manual without any prior notice  or indication. Due to such reasons as product version upgrade or regulatory requirement of  relevant regions, this manual will be periodically updated.

Disclaimer of Liability

  • To the extent allowed by applicable law, in no event will Uniview be liable for any special,  incidental, indirect, consequential damages, nor for any loss of profits, data, and documents.
  • The product described in this manual is provided on an “as is” basis. Unless required by applicable law, this manual is only for informational purpose, and all statements, information,  and recommendations in this manual are presented without warranty of any kind, expressed  or implied, including, but not limited to, merchantability, satisfaction with quality, fitness for  a particular purpose, and noninfringement.
  • Users must assume total responsibility and all risks for connecting the product to the Internet,  including, but not limited to, network attack, hacking, and virus. Uniview strongly  recommends that users take all necessary measures to enhance the protection of network,  device, data and personal information. Uniview disclaims any liability related thereto but will  readily provide necessary security related support.
  • To the extent not prohibited by applicable law, in no event will Uniview and its employees,  licensors, subsidiary, affiliates be liable for results arising out of using or inability to use the  product or service, including, not limited to, loss of profits and any other commercial  damages or losses, loss of data, procurement of substitute goods or services; property  damage, personal injury, business interruption, loss of business information, or any special,  direct, indirect, incidental, consequential, pecuniary, coverage, exemplary, subsidiary losses,  however caused and on any theory of liability, whether in contract, strict liability or tort  (including negligence or otherwise) in any way out of the use of the product, even if Uniview  has been advised of the possibility of such damages (other than as may be required by  applicable law in cases involving personal injury, incidental or subsidiary damage).
  • To the extent allowed by applicable law, in no event shall Uniview’s total liability to you for all  damages for the product described in this manual (other than as may be required by  applicable law in cases involving personal injury) exceed the amount of money that you have  paid for the product.

Network Security

Please take all necessary measures to enhance network security for your device.

The following are necessary measures for the network security of your device:

  • Change default password and set strong password: You are strongly recommended to change  the default password after your first login and set a strong password of at least nine characters  including all three elements: digits, letters and special characters.
  • Keep firmware up to date: It is recommended that your device is always upgraded to the latest  version for the latest functions and better security. Visit Uniview’s official website or contact  your local dealer for the latest firmware.

The following are recommendations for enhancing network security of your device:

  • Change password regularly: Change your device password on a regular basis and keep the  password safe. Make sure only the authorized user can log in to the device.
  • Enable HTTPS/SSL: Use SSL certificate to encrypt HTTP communications and ensure data  security.
  • Enable IP address filtering: Allow access only from the specified IP addresses.
  • Minimum port mapping: Configure your router or firewall to open a minimum set of ports to  the WAN and keep only the necessary port mappings. Never set the device as the DMZ host  or configure a full cone NAT.
  • Disable the automatic login and save password features: If multiple users have access to your  computer, it is recommended that you disable these features to prevent unauthorized access.
  • Choose username and password discretely: Avoid using the username and password of your  social media, bank, email account, etc, as the username and password of your device, in case  your social media, bank and email account information is leaked.
  • Restrict user permissions: If more than one user needs access to your system, make sure each  user is granted only the necessary permissions.
  • Disable UPnP: When UPnP is enabled, the router will automatically map internal ports, and  the system will automatically forward port data, which results in the risks of data leakage.  Therefore, it is recommended to disable UPnP if HTTP and TCP port mapping have been  enabled manually on your router.
  • SNMP: Disable SNMP if you do not use it. If you do use it, then SNMPv3 is recommended.
  • Multicast: Multicast is intended to transmit video to multiple devices. If you do not use this  function, it is recommended you disable multicast on your network.
  • Check logs: Check your device logs regularly to detect unauthorized access or abnormal  operations.
  • Physical protection: Keep the device in a locked room or cabinet to prevent unauthorized  physical access.
  • Isolate video surveillance network: Isolating your video surveillance network with other  service networks helps prevent unauthorized access to devices in your security system from  other service networks.

Learn More

You may also obtain security information under Security Response Center at Uniview’s official  website.

Safety Warnings

The device must be installed, serviced and maintained by a trained professional with necessary  safety knowledge and skills. Before you start using the device, please read through this guide  carefully and make sure all applicable requirements are met to avoid danger and loss of property.

Storage, Transportation, and Use

  • Store or use the device in a proper environment that meets environmental requirements,  including and not limited to, temperature, humidity, dust, corrosive gases, electromagnetic  radiation, etc.
  • Make sure the device is securely installed or placed on a flat surface to prevent falling.
  • Unless otherwise specified, do not stack devices.
  • Ensure good ventilation in the operating environment. Do not cover the vents on the device.  Allow adequate space for ventilation.
  • Protect the device from liquid of any kind.
  • Make sure the power supply provides a stable voltage that meets the power requirements of  the device. Make sure the power supply’s output power exceeds the total maximum power of  all the connected devices.
  • Verify that the device is properly installed before connecting it to power.
  • Do not remove the seal from the device body without consulting Uniview first. Do not attempt  to service the product yourself. Contact a trained professional for maintenance.
  • Always disconnect the device from power before attempting to move the device.
  • Take proper waterproof measures in accordance with requirements before using the device  outdoors.

Power Requirements

  • Install and use the device in strict accordance with your local electrical safety regulations.

  • Use a UL certified power supply that meets LPS requirements if an adapter is used.

  • Use the recommended cordset (power cord) in accordance with the specified ratings.

  • Only use the power adapter supplied with your device.

  • Use a mains socket outlet with a protective earthing (grounding) connection.

  • Ground your device properly if the device is intended to be grounded. Battery Use Caution 

  • When battery is used, avoid:
    ➢ Extremely high or low temperature and air pressure during use, storage and transportation.
    ➢ Battery replacement.

  • Use the battery properly. Improper use of the battery such as the following may cause risks of  fire, explosion or leakage of flammable liquid or gas.
    ➢ Replace battery with an incorrect type.
    ➢ Dispose of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery.

  • Dispose of the used battery according to your local regulations or the battery manufacturer’s  instructions.

Regulatory Compliance

FCC Statements

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two  conditions: (1) this device may not cause harmful interference, and (2) this device must accept  any interference received, including interference that may cause undesired operation. Visit http://en.uniview.com/Support/Download_Center/Product_Installation/Declaration/ for  SDoC.

Caution: The user is cautioned that changes or modifications not expressly approved by the party  responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class A digital  device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable  protection against harmful interference when the equipment is operated in a commercial  environment. This equipment generates, uses, and can radiate radio frequency energy and, if not  installed and used in accordance with the instruction manual, may cause harmful interference  to radio communications. Operation of this equipment in a residential area is likely to cause  harmful interference in which case the user will be required to correct the interference at his own  expense.

LVD/EMC Directive

This product complies with the European Low Voltage Directive 2014/35/EU  and EMC Directive 2014/30/EU.

WEEE Directive–2012/19/EU

The product this manual refers to is covered by the Waste Electrical & Electronic  Equipment (WEEE) Directive and must be disposed of in a responsible manner.

Battery Regulation- (EU) 2023/1542

Battery in the product complies with the European Battery Regulation (EU) 2023/1542. For proper recycling, return the battery to your supplier or to a designated collection point.

Raccolta Carta

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals