Hunter Fan M8527-01 44 inch Verse Outdoor with LED Light Ceiling Fan Installation Guide

: September 28, 2024
: Hunter Fan

Hunter Fan M8527-01 44 inch Verse Outdoor with LED Light Ceiling Fan

INSTALLATION GUIDE

Congratulations on purchasing your new Casablanca® ceiling fan! It will provide comfort and performance in your home or office for many years. This installation and operation manual contains complete instructions for installing and operating your fan.

We are proud of our work and appreciate the opportunity to supply you with the best ceiling fan available anywhere in the world.

To register your fan, please visit: ” www.CasablancaFanCo.com/register

Save your receipt for proof of purchase.

What to Expect with Your Installation

Read and Save These Instructions

This product conforms to UL Standard 507.
w.1 -To reduce the risk of fire, electrical shock, or personal jury, mount fan directly from building structure and/or an outlet box marked acceptable for fan support of 70 Ibs (31.8 kg) and use the mounting screws provided with the outlet box.

w22 -To avoid possible electrical shock, before installing or servicing your fan, disconnect the power by turning off the circuit breakers to the outlet box and associated wall switch location. If you cannot lock the circuit breakers in the off position, securely fasten a prominent warning device, such asa tag, to the service panel.

w.3 – To reduce the risk of fire, electrical shock, or motor damage, use only Casablanca Solid State Speed Controls.
w4 -To reduce the risk of personal injury, do not bend the blade brackets when installing the blade brackets, balancing the blades, or deaning the fan. Do not insert foreign objects in between rotating fan blades.
1~ Allwiring must be in accordance with national and local electrical codes ANSI/NFPA 70. If you are unfamiliar with wiring, use a qualified electrician.
2 – Use only Casablanca replacement parts.

This equipmentha s been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.

These limits are to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications.

Tools Needed

Ceiling Options

Ceiling Bracket

Preparation

DO NOT install the blades before mounting the motor and making the wire connections.

Downrod

Mounting Options

WIRING

Note : If using the optional Low Profile canopy, you may need to carefully tilt the fan assembly at an angle while connecting the wires.

Be sure to tilt the fan AWAY from Receiver the opening in the ceiling bracket and ensure the fan does not fall.

Using an orange wire connector from the % hardware bag:

Connect the 3 grounding wires (green, green/yellow stripe, or bare copper) coming from the ceiling, downrod, and ceiling bracket. $ Note: To connect the wires, hold the bare metal leads togethearn d place a wire connector over them, then twist clockwise until tight.

WARNING:

Al wiring must be in accordance with ational and local electrical codes If you are unfamiliar with wiring or in doubt, consult a qualified electrician.

Canopy

Blades

Switch Housing & Light Kit

Switch Housing & Light Kit (continued)

Remote Control

Operation, Maintenance & Cleaning

Safe-Exit

The Safe-Exit Program gives you about thirty seconds of light when you turn the lights off to exit the room before the lights go out. To use Safe-Exit:
« Press the Fan Off button for at least three seconds to initiate the Safe- Exit Mode.
« The lights will flash for visual confirmation.
« The lights will stay on 50% brightness for 15 seconds and then begin to dim. After a total of 30 seconds, the lights will be completely off.

Troubleshooting

Fan doesn’t work

Press a fan speed button (1-4).
Push the motor reversing switch firmly left or right to ensure that it is engaged.
Check the circuit breaker to ensure the power is turned on.
Make sure the remote control battery is working.
Make sure the blades spin freely.
Turn off power from the circuit breaker, then loosen the canopy and check all the connections according to the wiring diagram on pages 10-11.
Check the plug connections in the switch housing.

Excessive wobbling

Tighten all of the blade and blade iron screws until they are snug.
Turn the power off, support the fan carefully, and check that the hanger ball is properly seated.
Use the provided balancing kit and instructions to balance the fan.

Noisy Operation

Tighten the blade and blade iron screws until they are snug.
Check to see if any of the blades are cracked. If so, replace all of the blades.

Remote does not work

Make sure the battery is installed correctly.
Install a new battery.
If the remote still does not work, you may need to pair your remote. To prevent faulty operation, please disconnect power (at the wall switch, breaker, or fan) from all other ceiling fans within range while pairing. To pair: cycle power to the fan by turning power off and back on at the wall switch (or circuit breaker if necessary). Within three minutes, press and hold both the Fan Off button and the 4 button for four seconds to pair the remote. If applicable, the fan will turn on and the lights will flash and stay on to indicate successful pairing.

AUTHORIZED SERVICE CENTERS

For the most updated list of Casablanca Authorized Service Centers, visit
www.CasablancaFanCo.com or call toll free 1-888-227-2178.

LED lights will not dim

To enable dimming, you must first set your remote to Dimming Mode. To toggle Dimming Mode on or off, hold down the Fan Off button while pressing the Light Down arrow twice.