UNIGEAR SNOWTUNEL Wireless Bluetooth Headphone User Manual

UNIGEAR SNOWTUNEL Wireless Bluetooth Headphone

UNBOXING

PRODUCT INTRODUCTION

CHARGING

Open the charging case, correctly place the earphones (with the buttons and indicator lights facing up), then connect the charging case to the charging cable. The red light on the earphones will flash to indicate charging, and the blue light will stay on when fully charged.

INSTALLATION

The Unigear SnowTune Bluetooth headphones are compatible with any snow helmet that has “Audio Ready” earmuffs. Simply place the headphones into the helmet’s audio earpiece cover.

BASIC PARAMETERS

1. Weight: About 70g
2. Button: One each on the left and right head phones
3. Battery Specification: Rechargeable lithium polymer battery 3.7V
4. Low Power Warning: 3.5V
5. Continuous Talk Time: 9 hours
6. Continuous Music Playback Time: About !OH (at 100% volume)
7. Charging Port: 2PIN charging pin
8. Charging time: About 1.5 hours
9. Frequency Response: 20Hz~20KHz
10. Operating Temperature: -20°C~60°C
11. Storage Temperature: -20°C~80°C

BLUETOOTH PARAMETERS

1. Bluetooth Version: Ver.5.0
2. Supported Protocols: SBC, AAC
3. Bluetooth Name: Unigear SnowTune
4. Transmit Power: class ll(-6dBm~+4dBm)
5. Reception Sensitivity: -92dBm
6. Working Frequency: 2.402GHz~2.480GHz
7. Transmission Distance: !Om

POWERING ON/OFF

1. Place in the charging box to turn off, take out from the charging box to turn on.
2. Manual power on: In the off state, and when the headphones are outside the charging box, press and hold the L/R headphone button for 2 seconds, the blue light will come on with a “power on” audio cue.
3. Manual power off: In the on state, press and hold the L/R headphone button for 4 seconds, the blue light will come on with a “power off” audio cue.
4. If powered on and not connected to Bluetooth, the headphones will automatically turn off after 5 minutes.

PAIRING

1. Take the headphones out of the charging box, the blue light will flash twice, indicating pairing mode.
2. On your device, turn on Bluetooth, search and add a new device. Choose ‘Unigear SnowTune ‘ and connect.
3. Once the headphones are successfully connected, a voice will say “Paired”.
4. Disconnecting: If you actively disconnect the headphones, there will be a “disconnected” audio cue, and the headphones will automatically enter pairing mode.
5. Reconnecting: When the headphones are turned on again, they will automatically try to connect to devices on the paired list.

PAIRING NOTES

1. If turned on and not connected to any device, the headphones will automatically turn off after 5 minutes.
2. If you can’t find the headphones during a search, make sure your device’s Bluetooth is turned on; turn off the Bluetooth headphones and then turn them back on. Once the blue light flashes twice, search for Bluetooth devices again.
3. If the connection is lost due to the device being too far from the phone, and it returns within the signal range within 2 minutes, the device will automatically reconnect. If it doesn’t reconnect within 2 minutes, it will enter pairing mode, and if it doesn’t successfully pair within 5 minutes, it will turn off.

BUTTON FUNCTIONS

1. Play Music: Click the L/R headphone button or play directly from the phone.
2. Pause Music: During playback, press the L/R headphone button to pause.
3. Previous Song: Double-click the left headphone button.
4. Next Song : Double-click the right headphone button.
5. Answer Call: When receiving a call, click the L/R headphone button.
6. Decline Call: When receiving a call, hold the L/R headphone button for 2 seconds.
7. End Call: During a call, click the L/R headphone button; you will hear a “do” sound cue.
8. Voice Assistant (requires phone support and activation): Triple-click the L/R headphone button; you’ll hear a “do” cue, activating the voice assistant feature.

BATTERY INDICATOR

1. On IOS and Android devices, you can see the real-time battery level of the headphones.
2. When the battery is low, the headphones will play a “Battery Low” audio cue, and the red light will flash.

IC Warning

This device complies with Industry Canada’s license-exempt RSSs. Operation is subject to the following two conditions:

1. This device may not cause interference; and
2. This device must accept any interference, including interference that may cause undesired operation of the device.”
   The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

FCC Warning

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference
2. this device must accept any interference received, including interference that may cause undesired operation.

NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

NOTE: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
For the latest information, please subscribe to the official website unigearshop.com.
If you have any after-sales issues, please contact Unigear customer service at Email: service@unigearshop.com.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>