UNIGEAR BOMBING Wireless Bluetooth Earpiece User Manual
- June 4, 2024
- UNIGEAR
Table of Contents
UNIGEAR BOMBING Wireless Bluetooth Earpiece User Manual
Thank you!
You are the reason Unigear does what we do.
Thank you for being with us.
We hope you will enjoy it and we’ from you on social media!
Share your adventure with Unigear, @unigearstyle and #unigear to join our
monthly photo contest and win the prize!
DEUTSCHLAND
Unigear Bombing Wireless Bluetooth Earpiece
Portable bag
Charging cable
ABOUT THE PRODUCT
INSTALLATION
Unigear Bombing Bluetooth Earpiecse are compatible with any snow helmet that features “audio ready” ear pads. Simply place your headphones into your helmet’s audio ready ear pad sleeves.
BASIC PARAMETERS
- Weight: Approx. 70g
- Button: One on each side of the earpiece
- Battery specification: Rechargeable lithium polymer battery 3.7V
- Low-battery alert: 3.5V
- Duration of continuous calls: Approx.6.5H
- Duration of continuous music playing: Approx.7H
- Charging interface: Magnetic suction charging interface
- Charging time: Approx.1 H
- Frequency response: 20Hz-20KHz
- Working temperature: -10°C-50°C
- Storage temperature: -20°C-80°C
BLUETOOTH PARAMETERS
- Bluetooth version: Ver.5.0
- Protocol supported: SBC, AAC
- Name of Bluetooth: Unigear Bombing
- Transmitting power: Class II (-6dBm-‘+6dBm)
- Receiving sensitivity: -92dBm
- Frequency: 2.402GHz-2.480GHz
- Transmission distance: 10m
POWER ON/OFF
- Power on: Hold the buttons on L/R earpiece for 2 seconds, and the blue LED indicator light will turn on, accompanied with a “power on” voice prompt.
- Power off: In power-on state, hold the button of L/R earpiece for 4 seconds, and the blue LED indicator will light up, accompanied with a “power off” voice prompt.
- Automatic power off: In power-on state when Bluetooth is not connected to other devices, the earpieces will automatically turn off after 5 minutes.
PAIRING
- Hold the button for 2 seconds to power on, and the blue LED indicator will light up, accompanied with the “power on” voice prompt. The LED indicator will then flicker in red and blue and enter the pairing state.
- Enable Bluetooth on the device, search for and add new device, select “Unigear Bombing” to connect.
- The earpieces are successfully connected, accompanied with a “Paired” voice prompt.
- Disconnected and reconnected: After active connection to the earpieces are turned off, there will be a “disconnected” voice prompt, and the earpieces will automatically enter pairing mode. After the earpieces have been restarted, they will be connected and actively paired with the device in the list. After power has turned on and the connection fails, press MFB button. The earpieces will attempt to connect to the most recent connected device.
RETURN TO FACTORY DEFAULT SETTING
When the two earpieces fail to be grouped or connected to Bluetooth, try to restore to default settings as explained below:
- Simultaneously hold the buttons on L/R earpiece for 4 seconds to turn off power on the earpieces.
- Simultaneously hold the buttons on L/R earpieces to turn off power after they are powered on.
- Simultaneously hold the button on L/R earpieces for 2 seconds to power on the earpieces. Place the two earpieces close to each other, and they will be grouped automatically. At this time, the LED indicator will change from quick flickering in red and blue to slow flickering in red and blue, and they will enter into pairing mode.
PAIRING NOTES
- If no device is connected after power is on, the earpieces will be turned off automatically after 8 minutes
- If the earpieces cannot be found, please confirm whether the Bluetooth function of the device has been enabled. Turn off the Bluetooth earpieces and restart them. Hold the button on L/R earpiece to start the device. After the LED indicator starts flickering slowly in red and blue, the Bluetooth devices can be found again.
- When the device has disconnected because it is beyond the accepted distance, it will actively reconnect to the currently disconnected mobile phone. At the same time, there will be a prompt tone of “Do, do, do” in the earpieces. If the mobile phone is not connected within 5 minutes, the earpiece will enter standby mode and the LED indicator will flicker slowly in red and blue.
FUNCTIONS OF KEYS
- Play music: Press the button on L/R earpiece or operate the player on the mobile phone.
- Pause music: When music is being played, press the button on L/R earpiece, music will be paused.
- Previous title: Double press the button on L earpiece.
- Next title: Double press the button on R earpiece.
- Receive a call: In case of an incoming call, press the button on L/R earpiece, accompanied with a “do” prompt tone.
- Reject a call: In case of an incoming call, hold the button on L/R earpiece for 2 seconds, accompanied with a “do, do” prompt tone.
- End a call: In the course of a call, press the button on L/R earpiece, accompanied with a “do” prompt tone.
- Voice assistant (mobile phone has to support enablement of this function): Press the button on L/R earpiece three times, and the voice assistant will be enabled after a “do” prompt tone is heard.
BATTERY LEVEL ALERT
- Remaining battery level can be displayed in real time on IOS and Android devices.
- When remaining battery level is too low, there will be a “battery low” voice prompt in the earpiece, and the LED indicator will flicker in red.
LED STATUS
- Power on: The blue LED indicator will light up
- Pairing: The LED indicator will slowly flicker in blue and red for 5 minutes
- Pairing is successful, and music is not played: LED indicator will be flickering slowly in blue at an interval of 3 seconds
- Pairing is successful, and music is playing: The LED indicator will be double flickering in blue at an interval of 5 seconds
- Incoming call: The LED indicator will be flickering quickly in blue
- Dialing: The LED indicator will be flickering quickly in blue
- In the course of a call: The LED indicator will be double flickering in blue at an interval of 5 seconds
- Charging: The red LED indicator will light up
- Charging is completed: The blue LED indicator will light up
- Low battery: Alert will prompt once every three minutes, accompanied with a voice prompt of “Battery low” , and the LED indicator will flicker in red
For latest information, please subscribe to our official website:
Unigearshop.com
For any after-sales problem, please contact the Unigear customer service at Email: [email protected]
We are here to help!
Questions? Concerns? Comments? Get in touch with us anytime: [email protected]
@unigearstyle
Read User Manual Online (PDF format)
Loading......