DILLON AWT35-100147 Blue Mobile Application User Guide
- September 26, 2024
- Dillon
Table of Contents
DILLON AWT35-100147 Blue Mobile Application
Specifications
- Compatible with Dillon EDX mobile application
- Supports KGF, LBF, and N units of measurement
- Stores force measurement, date stamp, and time stamp in logs
- Export data as PDF or Excel file
- Bluetooth connectivity
Product Usage Instructions
Connecting the Dynamometer
To connect your Dillon dynamometer to the mobile application:
- Open the Dillon EDX application on your mobile device.
- Click on the Add Bluetooth Device icon.
- Select the appropriate EDX-Blue dynamometer from the list of pairable devices.
- Rename the device for easy identification.
- The dynamometer must be powered on to establish the connection.
Zeroing out the Dynamometer:
To zero out the reading:
- Click the Zero key on the mobile application or press the Zero key on the dynamometer.
- The zeroing will occur simultaneously on the dynamometer display and the mobile application.
Changing the Unit of Measurement
To change the unit of measurement
- Tap the Units button within the mobile application or use the softkey interface on the dynamometer.
- The unit change will reflect on both the dynamometer display and the mobile application.
Formatting Record Logs
To format record logs:
- Change the print formatting via the CSV Export Formats dropdown selection found under settings.
Capturing a Record Log
To capture a log:
- Click the Store button at the bottom of the screen in the mobile application.
Exporting Stored Data
To export stored data:
- Click on the Export button located on the bottom right of the screen.
- Select PDF or Excel file format for export.
- The exported logs will contain force readings, units, time stamps, serial number, capacity, and calibration due date information.
FAQ
-
Q: Can I use the Dillon EDX-Blue with both Android and iOS devices?
A: Yes, you can download the Dillon EDX mobile application from Google Play Store for Android devices and from the App Store for iOS devices. -
Q: How do I remove a paired device from the Dillon EDX application?
A: You can remove a paired device by selecting the remove icon on the device line within the application.
Dillon EDX-Blue Mobile Application User Guide
The Dillon EDX-Blue is compatible with the free Dillon EDX mobile application, which can be downloaded from the Google Play Store for Android devices and from the App Store for iOS devices. It can be found in either store by searching “Dillon EDX” and is identifiable by the Dillon EDX logo shown here:
Please note that users are still able to edit settings using the standard EDX- Blue dynamometer softkeys. Any settings changes made on the unit will be reflected in the mobile application. With the introduction of the new app, some settings can be changed through the mobile application, which will be detailed below.
Connecting your Dillon dynamometer to the mobile application:
First, open the Dillon EDX application on a mobile device. Once loaded, users
will land on a “Devices” page that populates all Dillon EDX-Blue units the
device has previously connected to. For the initial connection to an EDX-Blue
dynamometer, power on the unit, and within the mobile app, click the “Add
Bluetooth Device” icon:
This will bring up a list of all powered-on EDX-Blue dynamometers within range
of the mobile device that are not connected. Select the appropriate EDX-Blue
dynamometer on the list of pairable devices and rename it for easy
identification. Once an EDX-Blue dynamometer has been paired with the device,
it will automatically populate the devices list upon future power-ups. The
dynamometer must be powered on to establish the connection. It can be removed
from the device list anytime by selecting the icon on the device line.
Zeroing out the dynamometer:
To zero out the unit’s reading, click the “Zero” key on the mobile application
in the bottom left corner. This can also be performed by pressing the “Zero”
key on the dynamometer. Zeroing occurs nearly simultaneously on both the EDX-
Blue dynamometer display and within the mobile application:
Changing the unit of measurement
The EDX-Blue dynamometer supports three units: KGF, LBF, and N. While these can be changed via the softkey interface on the dynamometer, they can also be changed by tapping the “Units” button within the mobile application. The change will be nearly simultaneous between the display on the dynamometer and within the mobile application:
Formatting Record
Logs:
The EDX-Blue dynamometer and mobile application will store readings that
include the force measurement, date stamp, and time stamp. Users can change
the print formatting of the logs via the “CSV Export Formats” drop-down
selection found under settings:
Capturing a Record Log:
Logs can be captured anytime through the mobile application by clicking the
“Store” button at the bottom of the screen.
Exporting stored data:
To export stored data, click on the “Export” button located on the bottom
right of the screen:
This will take users to a screen with the stored data page with the option to export as a PDF or Excel file. The logs will contain stored force readings with units and time stamps, as well as noting the unit’s serial number, capacity, and calibration due date. Users can export the information in any format supported by the mobile device (email, airdrop, iMessage, text message, etc.)
Clearing the logged data:
To clear existing stored data and start new records, first connect to the desired EDX-Blue Dynamometer. Then, navigate to the device selection screen and open settings. Once the settings screen has been accessed, click the “Clear Transactions” button to clear all stored data for the connected device.
For further support, contact your local Dillon distributor or reach out to our team directly at: info@dillon-force.com