HAVIT Merle Lite Wireless Earbuds User Guide
- October 30, 2023
- havit
Table of Contents
HAVIT Merle Lite Product user guide
User Guide
Merle Lite Wireless Earbuds
Product host and accessories (Product Pic):
2 headphones and 1 charging case
Product structure description (Product Pic):
LED light (headphone part), touch button, microphone, charging contact point,
LED light (charging case part), charging port, button
Add a sentence to the picture:
Note: The pictures in this manual are schematic diagram, there may be
deviation from the object, please refer to the object
Basic function
Power‐on, Bluetooth pairing
Step 1 (Please confirm that your phone supports Bluetooth function):
Start‐up and pairing method:
Power on: open the charging case cover
Pairing state: after turning on, it automatically enters the pairing
state. One headphone flashes with white light and the other headphone
does not flash
Step 2: Pairing mode
Select “HAVIT Merle Lite” from the mobile phone Bluetooth list to
match, and the headphone LED Light is off pay attention to:
A) The pairing mode lasts for 3 minutes. If you do not match during
this period, the headphone will automatically shut down. If you need to
reconnect, follow the above steps to start the pairing
B) After the headphone is turned on, itwill be automatically connected to the
phone connected for the last time before shutdown (Bluetooth is on). The phone
does not need to search for the connection again
Shut down
Place the headphones into the charging case and close the lid
Answer the telephone
Double press the touch button on either side of the headphone
End of the call
Double press the touch button on either side of the headphone
Refuse to answer the call
Long press the touch button on either side of the headphone for 2 seconds
Voice assistant
Press the touch button on the left headphone for 3 times (Example: Hi siri,
Xiao Ai)
When used unilateral headphone, the left and right headphones press 3
times are voice assistant
Game mode on / off
Press the touch button on the right headphone for 3 times Shutdown
will automatically turn off the game mode
Music play
Play / pause: double press the touch button of either side of the headphone,
pause, and then double press to play
Last song: Long press the touch button of the left headphone for 2 seconds
Next song: long press the touch button of the right headphone for 2
seconds
Note: When using unilateral headphone, either long press the touch button
of the left or right headphones for the next song.
Charging case charging
- When charging case power is insufficient, the red light on charging case lashing
- When charging the charging case through the charging cable, the white light on the caseon. When is fully charged white light off.
Charge case charge level display
Open / close the charging case cover, and the red light flashes
when the power is low
Headphone charging
- When the headphone power is low, the headphone emits a prompt sound
- Put the headphone back to the charging case and close the lid to charge
- Put the left earphone into the charging case, and the white light of the case flashes for 2 times
- Put the right earphone into the charging case, and the white light of the case flashes for 2 times
- Left and right headphones are put into the charging case at the same time, and the case lig hts flash for 2 times
reset
Put the two headphones into the charging case, open the lid, long press
the button of the cha rging case for 5 seconds, the case white light will
flash, the headphone will enter the pairing state again, a headphone white
light will flash slowly, and the mobile phone can search for Blu
etooth for pairing
Specification:
Bluetooth version: V 5.3
Headphone size: 3116.618.9mm
Size of charging case: 48.2 49.5 27mm
Input specification: 5V 1A
Bluetooth normal distance range: 10M
warn:
- Please follow the use instructions of this instruction manual.
- Do not use the charger with the output specification over 5V 1A to charge the product, otherwise it will easily cause the product battery damage.
- Please use and store the product in the room temperature environment.
- Do not use this product near the heat source, such as radiator, heat air regulator, stove or other heat generating instrument.
- Do not block the opening of this product, such as charging port, indicator light and microphone, etc.
- Please avoid using the product at too much volume or for a long time to avoid causing damage to the user’s hearing.
- Whether the equipment is damaged for any reason, we must contact our brand after‐sales personnel in time. unauthorized demolition and modification will make the warranty invalid.
FCC WARNING
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment .
This transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter.