Vera Fi Audio LLC SnubWay Noise Defende Owner’s Manual
- September 28, 2024
- Vera Fi Audio LLC
Table of Contents
Vera Fi Audio LLC SnubWay Noise Defende
Specifications
- Product Name: SnubWay Noise Defender
- Manufacturer: Vera-Fi Audio LLC
Product Usage Instructions
Installation
To effectively reduce high-frequency noise, follow these
steps:
- Plug the SnubWay into a wall receptacle.
- Install the SnubWay close to the equipment you want to filter noise from.
- If using power conditioners with separate filter circuits, plug the SnubWay into the same outlet or circuit as the power conditioner.
Optimal Placement:
For best performance, place the SnubWay in the following locations:
- Close to the equipment needing noise filtration.
- In the first outlet position of a power outlet strip.
Usage:
The SnubWay will immediately start filtering a broad range of high-frequency noise once plugged in.
FAQs
Q: How do I know if the SnubWay is working?
A: You should notice a reduction in high-frequency noise interference on your electronic devices once the SnubWay is operational.
Q: Can I use the SnubWay with any type of electronic equipment?
A: Yes, the SnubWay can be used with various electronic devices to reduce high-frequency noise pollution.
PRODUCT INFORMATION
Thank you for your purchase of SnubWay!
Prepare to say goodbye to high-frequency noise and other pollution on your mains caused by many of the common switch mode power supplies found throughout a typical modern home.
- SnubWay™ is an advanced parallel mains noise filter utilizing 4discrete LRC filters tuned to absorb high-frequency noise from switch mode power supplies (SMPS) and other sources in the 10kHz to 2MHz frequency range. Today’s homes have power lines that are constantly polluted with dirty pulse switching noises from SMPS; from our cell phone chargers to the power supplies for LED lamps and even our laptop computer supplies. They all utilize high-speed switching in the 100kHz to 1 MHz range, and they often leak noise back into the house AC mains.
USING
Simply plug SnubWay into a wall receptacle and it will immediately get to work snubbing a broad range of high-frequency noise. For best performance, SnubWay should be installed close to the equipment you want to filter noise away from. This should be an outlet on the same circuit as the component, or in the first outlet position of a power outlet strip. If using power conditioners that utilize separate filter circuits for each set of outlets, SnubWay should be plugged into the same outlet or circuit that the power conditioner is fed from. This will ensure that the entire line receives the filtration benefit, snubbing any SMPS noise from affecting components downstream of this device.
MC Phono Stage Output
Noise Floor with and without SnubWay (with offset for clarity)
CONTACT INFORMATION
- Vera-Fi Audio LLC
- www.verafiaudiollc.com
- (818) 584 – 6870
“`
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>