lakewei DK8701 Mechanical Keyboard User Guide
- June 1, 2024
- lakewei
Table of Contents
lakewei DK8701 Mechanical Keyboard
Basic Parameters
- Product model: DK8701
- Keyboard interface: USB TYPE-C
- System compatibility: Windows/Mac/IOS/Android
- Input: 5V 1A
- Battery capacity: 3000mAh (different versions have different capacities)
- Connection method: Wireless mechanical keyboard
- Backlight color: Full color RGB/Monochrome
- Product size: 36.5×16.9×4.2CM
- Package contents: Keyboard/Data cable/Instruction manual/Receiver
Charging Indication
When the battery is low, the right FN key has been red flash prompt until the keyboard is turned off. When the Type-c line is plugged in for charging, the FN key will be on red for 3 seconds and then will be prompted to charge synchronously with the backlight.
Note: Do not expose the battery of this product to the sun, and the input voltage is limited to 5V (overpressure may cause damage to the product and cannot enjoy warranty service).
Indicator Light/Knob
Power display:
FN + backspace key displays, full power letter area 1-0) is on, 50% power
letter area 1-6 is on, and low power letter area 1-3 is on (when FN +
backspace key, the overall backlight of the keyboard is off, the power
indicator is on, the normal backlight is restored when released, and cannot be
displayed when the charging cable is plugged in)
- Low power indication: when the power is low, the FN key will always flash red until the keyboard is turned off
- Charging instruction: When the TYPE-C line is plugged in for charging, the FN key will be on red for 3 seconds and then will be prompted to charge synchronously with the backlight.
- Synchronize with backlight after full
Switch/connection mode switching
Wired and wireless switching: Switch at the bottom of the keyboard to NO state wireless function is turned on (the wired function is turned OFF at this time) Switch to OFF state Wired state Plug in the TYPE-C cable to connect to the PC end can be used (the wireless is disconnected at this time)
2.4G Wireless Wired Connection
Wireless 2.4G mode of use:
-
Code pair: Turn the bottom switch to the ON wireless state, press the FN TAB key (the backlight of the TAB key turns green at this time) to enter the 2.4G mode, press the FN TAB key for 5 seconds (the backlight of the TAB key flashes green at this time) to enter the 2.4G code pair state, insert the receiver into the PC terminal, and place the keyboard direction key close to the receiver to code pair, the TAB key backlight is synchronized with the overall backlight, that is, the code can be used normally after the code is completed. (2.4G code matching has been completed when leaving the factory. Customers are not required to perform code matching according to this operation.
In order to prevent the keyboard from mixing the receiver during the sales process, code operation instructions are added.) -
If you need to use the 2.4G function, just insert the receiver into the PC and press the FN TAB key (provided that the keyboard and the receiver are paired)
Note: If the keyboard uses the 2.4G connection mode in the wireless state, the keyboard will default to the 2.4G connection TAB light and flash green when starting next time. If the keyboard is connected to Bluetooth, the button light will flash to remind.
Wired connection:
Turn the switch to OFF wired state, insert the data line TYPE-C interface into
the keyboard interface USB interface into the computer interface.
Keyboard Backlight Recording Method
Backlight record key combination
WIN system shortcut keys
FN+A Enter the WIN system
MAC system shortcut keys
FN+A Enter the MAC system
Note: MAC system (the left WIN key function is swapped with the left AlT function in this mode)
Fn key combination
Special shortcut keys
Light effect toggle key combination
FN knob Press the backlight effect under the switch knob: streamer-neon- monochrome switch-off
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- this device may not cause harmful interference.
- this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception,which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one
or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
This manual is for reference only and is subject to change without notice.
Thank you for your understanding.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>