ErgoUP CFSB Leg Rest User Guide
- May 15, 2024
- ERGOUP
Table of Contents
ErgoUP CFSB Leg Rest
Specifications:
- Pad rotation: Floats to match leg angle
- Pad height adjusts: 14 – 24 inches
- Pad distance from chair adjusts: 16 – 26 inches
- XL Adapter Available for more adjustment
Product Usage Instructions
Preparing Your Chair:
Most office chairs have a telescopic plastic sleeve that covers the main chair
cylinder. Slide the bottom section up to expose the chair cylinder for leg
support attachment.
Attaching The ErgoUP to Your Chair:
Open the Velcro tie strap attached to your ErgoUP, wrap the strap around the
cylinder through the D ring, and pull it tight. Press the Velcro pieces
together to secure the leg support.
Adjusting The Leg Rest:
Set the distance by aligning the back edge of the pad behind your knee using
horizontal adjustment. Adjust the height so that your knee is comfortable and
not raised off the seat of the chair.
Pad Rotation and Adjustment:
The pad rotates to match your leg angle. Adjust the pad height between 14 – 24
inches and the distance from the chair between 16 – 26 inches. An XL Adapter
is available for additional adjustment.
XL Upgrade:
If you need to increase the distance between your seat and feet,purchase the
XL Upgrade which includes a 6-inch extension and larger casters. Suitable for
taller individuals or those with larger body sizes.
FAQ:
Q: Can the ErgoUP be used with any office chair?
A: The ErgoUP is compatible with most regular, single-post office chairs.
Chairs with a pyramid-style base are not suitable for use with the ErgoUP.
Q: How do I know if I need the XL Adapter?
A: Consider purchasing the XL Adapter if you require further adjustments
beyond the standard height and distance settings of the ErgoUP.
Installation of The ErgoUP Leg Rest
Quick Guide to Using your Leg Rest at Work
Installing your new ErgoUP is super easy! It comes assembled for your
convenience and will attach to almost any regular, single post office chair.
If you have questions about your particular chair, please contact us before
ordering.
NOTE: If the base of your chair is like a pyramid, the ErgoUP will not work properly.
Preparing Your Chair
Most office chairs have a telescopic plastic sleeve that covers the main chair
cylinder. Normally there are three sections. You must slide the bottom section
up so that it exposes the chair cylinder. This is where the leg support
attaches to the chair.
Attaching The ErgoUP to Your Chair
Open the Velcro tie strap attached to your ErgoUP, leaving it threaded through
the
support adapter. Now wrap the strap around the cylinder and through the “D”
ring. The D-ring is chrome metal component on the strap. When the strap is
through the D-ring pull it tight and press the Velcro pieces together. The leg
support is now ready to adjust to fit you.
Adjusting The Leg Rest
Set the distance by moving the back edge of the pad so that it is directly behind your knee. You can make this adjustment by using the horizontal adjustment. The final setting is the height. It is recommended the height is set so that the knee is comfortable and does not raise your leg off the seat of the chair. Always follow your doctor or safety consultant’s recommendations for proper support first.
- Pad Rotation: Floats to match leg angle.
- Pad height adjusts: 14″ – 24″
- Pad distance from chair adjusts: 16″ – 26″ (XL Adapter Available for more adjustment)
XL Upgrade
If you already purchased an ErgoUP Leg Support and need to add an extension, please purchase here. This upgrade includes a 6″ extension as well as larger casters. If you are ordering a new ErgoUP Leg Support, you can select this as an option from the page of the model you are interested in.
This extension simply attaches to your ErgoUP to increase the distance between your seat and your feet by up to 6″.
This is used by people over 6 Feet in height AS WELL AS by people with larger bodies, especially with larger back sides that push them forward on their seat.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>