Yealink OPS Video Conferencing Australia Instructions
- September 26, 2024
- Yealink
Table of Contents
OPS Video Conferencing Australia
Specifications
- Product Name: MCore OPS
- Package Contents: Hardware components
- Power-on Password: Empty
Product Usage Instructions
Installation
When installing or uninstalling the MCore OPS, ensure the
endpoint is powered off to avoid abnormal operation.
Hardware Component Instructions
For resetting the factory settings:
- Ensure the OPS is powered off.
- Press the power button while pressing the reset key.
Power On
-
Press the OPS power button to start the OPS after complete
installation. -
Press the switch signal source button located in the
lower-right corner of the MeetingBoard. -
Enter the power-on password, which is empty.
FAQ
Q: What should I do if OPS is not starting after
installation?
A: Ensure the endpoint is powered off before installation and
follow the hardware component instructions for resetting the
factory settings.
Q: How do I change the power-on password?
A: Refer to the user manual for instructions on changing the
power-on password of the MCore OPS.
Q: Can I install OPS without powering off the endpoint?
A: It is recommended to always power off the endpoint before
installing or uninstalling the OPS to prevent abnormal
operation.
MCore OPS Installation
Package Contents
MCore OPS Installation
Installation
NOTE When installing or uninstalling OPS, ensure the endpoint is powered off.
Otherwise, OPS may be abnormal.
1
MCore OPS Installation
Hardware Component Instructions
2
MCore OPS Installation
*When the OPS is powerd off, press the power button while pressing the reset key to reset the factory settings.
3
MCore OPS Installation
Power on
1. Press the OPS power button to start OPS after installation completely.
2. Press the switch signal source button
in the lower-right corner of the MeetingBoard.
3. Enter the power-on password, and the power-on password is empty.
4
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>