PRISM plus Sentinel Pro Smart Lock User Manual
- September 25, 2024
- PRISM plus
Table of Contents
Sentinel Pro Smart Lock
Specifications:
- Product Name: Sentinel Pro Smart Lock
- Compliance: FCC radiation exposure limits
- Recommended Minimum Distance: 20cm between the radiator and
body
Product Usage Instructions:
Installation:
1. Choose a suitable location on your door to install the
Sentinel Pro Smart Lock.
2. Ensure the area is clean and free from any obstructions.
3. Follow the provided installation guide to securely attach the
smart lock to your door.
Operation:
1. To lock the door, press the designated locking button on the
smart lock or use the accompanying mobile app.
2. To unlock, enter your PIN code or use the mobile app to
remotely unlock the door.
3. Ensure to change the batteries periodically to maintain
optimal performance.
Maintenance:
1. Regularly clean the smart lock with a dry cloth to prevent
dust buildup.
2. Check the battery status frequently and replace them when low
to avoid lockouts.
FAQ:
Q: How do I reset my PIN code?
A: Refer to the user manual for instructions on resetting your
PIN code. Typically, you need to access the lock settings through
the mobile app or keypad to change the PIN.
Q: Can I install the Sentinel Pro Smart Lock on any type of
door?
A: The smart lock is designed to be compatible with most
standard doors. However, it is recommended to check the
compatibility of your door before installation.
Sentinel Pro Smart Lock
FCC Statement
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment. This
equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures: — Reorient or relocate the receiving antenna. —
Increase the separation between the equipment and receiver. — Connect the
equipment into an outlet on a circuit different from that to which the
receiver is connected. — Consult the dealer or an experienced radio/TV
technician for help This device complies with part 15 of the FCC rules.
Operation is subject to the following two conditions (1)this device may not
cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator & your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>