solarflexion 17671 5 16 x 7 Inch 304 Stainless Steel Instruction Manual
- September 25, 2024
- solarflexion
Table of Contents
17671 5 16 x 7 Inch 304 Stainless Steel
“`html
Product Specifications
- Product Name: AHJ Condensed Permit Package 2023
- Version: 5
- Compatible with: Asphalt, EPDM, & TPO roofs
- Patent Number: 8448407
- Manufacturer: QuickScrews International Corp
Product Usage Instructions
Recommended Materials
Ensure you have the following materials before installation:
- MFG approved sealant
- Required tools for predrilling
Installation Instructions
- Locate the rafter where the installation will take place.
- Predrill a hole in the designated spot.
- Fill the predrilled hole with the MFG approved sealant.
- Apply a ring of sealant around the bottom of the…
Frequently Asked Questions (FAQ)
Q: Can this permit package be used on all types of roofs?
A: The AHJ Condensed Permit Package 2023 is designed for use on
asphalt, EPDM, and TPO roofs. It is recommended to check
compatibility before installation on other roof types.
Q: What should I do if I encounter difficulties during
installation?
A: If you face any challenges during the installation process,
refer to the manual for troubleshooting tips. You can also contact
our customer support for assistance.
“`
AHJ CONDENSED PERMIT PACKAGE 2023
Version 5
17672SS 17670, 17671
7″ QB1 WITH 3″ MICROFLASHING®
FOR ASPHALT, EPDM, & TPO ROOFS
PATENT # 8448407
A DIVISION OF QUICKSCREWS INTERNATIONAL CORP
INSTALL INSTRUCTIONS
1 2 3 4 5 6
8
RECOMMENDED MATERIALS
· Rafter locator · Chalk or a crayon · Drill with a 3/16″ drill bit · MFG
approved sealant · M6 deep socket hex driver · 1/2″ wrench
INSTALLATION INSTRUCTIONS
1. Locate the rafter and predrill the hole 2. Fill the predrilled hole with
MFG approved sealant 3. Place a ring of sealant around the bottom of the
Microflashing® washer 4. Place the Microflashing® and drive the bolt until it
compresses 5. Insert the first nut and place the L-Foot 6. Insert the second
nut and tighten until secure
To compress Microflashing® properly with QuickBOLT use a 125 minimum torque
lbs/inch
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>