CountryLiving CL-18-BLK 18 in Black Electric Fireplace Stove Heater User Manual
- September 24, 2024
- CountryLiving
Table of Contents
CL-18-BLK 18 in Black Electric Fireplace Stove Heater
“`html
Product Information
Specifications
- Model: CL-18-BLK/CL-18-CRM
- Model Number: QC113RT
- Voltage: 120 VAC
- Amps: 11.7 amps
- Watts: 1400 watts
Product Usage Instructions
Package Contents
- Electric stove x 1
- Remote x 1
- Leg x 4
- Screw x 12
Assembly
1. Do not fully tighten screws during assembly. Only tighten
when all parts are installed in place.
Important Safety Instructions
Please read and understand the entire manual before attempting
to assemble, operate, or install the product. Follow basic
precautions to reduce the risk of fire, electrical shock, and
injury.
Electrical Connection
This heater is for use at 120 volts. Follow grounding
instructions provided. Use an adapter for connecting three-blade
grounding-type plugs to two-slot receptacles if needed.
Warranty
1 Year Limited Warranty: Manufacturer warrants the product to be
free from manufacturing and material defects for one year from the
date of purchase, subject to conditions and limitations.
Operation
Remote Control Functions
-
Power – Turns the unit on / off.
-
Flame – Controls the flame effect.
-
Fahrenheit temperature – Changes to Fahrenheit temperature
state. -
Heat – Turns the heat function on / off.
-
Temperature increase – Increases the temperature.
-
Temperature decrease – Decreases the temperature.
-
Decrease flame speed – Decreases the flame speed.
FAQ
Question: What should I do if I encounter missing parts?
Answer: Before returning to the store, contact
customer service for assistance at
877-430-0703 or via email at
resolutions@electricfireplacesdirect.com.
“`
Item # CL-18-BLK/CL-18-CRM Model # QC113RT
USER MANUAL
QUESTIONS, PROBLEMS, MISSING PARTS? BEFORE RETURNING TO THE STORE, CALL
CUSTOMER
SERVICE 8 A.M. – 5 P.M. CST, MONDAY – FRIDAY Call:
877-430-0703 or send email to
resolutions@electricfireplacesdirect.com
THANK YOU We appreciate the trust and confidence you have placed in Country
LivingTM through the purchase of this electric fireplace. We strive to
continually create quality products designed to enhance your home. Visit us
online to see our full line of products available for your home
TM
improvement needs. Thank you for choosing Country Living!
ATTENTION: · Find the location for the electric stove that is protected from
direct sunlight. · Failure to read all instructions may result in a possible
electric shock, fire hazard, and/or injury and will
void Warranty. WARNING: · If the information in this manual is not followed,
an electric shock or fire may result, causing property
damage, personal injury, or loss of life. · Do not store or use gasoline or
other flammable vapors or liquids in the vicinty of this appliance. · After
completely reading instructions, confirm that all controls on the electric
stove are in the OFF position.
Plug the unit into a 15 amp, 120 volt outlet.
Package Contents
Electric stove
2
Remote
Assembly
Do not fully tighten screws during assembly. Only tighten when all parts are
installed in place.
Parts list
B C
A Stove x 1
Assembly
B
Leg x 4
C Screw x 12
Part C Part B
Part A 3
Assembly (continued)
4
Important Safety Instructions
Please read and understand this entire manual before attempting to assemble,
operate or install the product. When using electrical appliances, basic
precautions should always be followed to reduce the risk of fire, electrical
shock, and injury to persons including the following:
CAUTION: DO NOT place any objects on top of the electric stove and top air
intake vents, as this will cause unit to overheat and can cause a fire.
CAUTION: The heater MUST NOT be located immediately below a socket or outlet.
CAUTION: There is a thermostat protective device provided inside of the unit.
If the inner temperature overheats or abnormal heating occurs, the thermostat
protective device will cut off the power supply to prevent damage or risk of
fire. CAUTION: CAUTION: If the information in this manual is not property
damage, personal injury or loss of life. CAUTION:
SAVE THESE INSTRUCTIONS
5
Important Safety Instructions (continued)
ELECTRICAL CONNECTION
A 15-amp, 120-volt, 60 Hz circuit with a properly grounded outlet is required.
Preferably, the fireplace will be on a dedicated circuit, as other appliances
on the same circuit may cause the circuit breaker to trip or the fuse to blow
when the heater is in operation. The unit comes standard with 6-ft. three-wire
cord, exiting from the rear of the fireplace. DO NOT exceed the current rating
of the current tap. ALWAYS plug this unit directly into a wall
outleVreceptacle. NEVER use with an extension cord or relocatable power tap
(outleVpower strip).
This heater is for use at 120 volts. The cord has a plug as shown at A. See
illustration for grounding instructions. An adapter as shown at C is available
for connecting three-blade grounding-type plugs to two-slot receptacles. The
green grounding plug extending from the adapter must be connected to a
permanent ground such as a properly grounded outlet box. The adapter should
not be used if a three-slot grounded receptacle is available.
Warranty
1 Year Limited Warranty: The manufacturer warrants this product to be free
from manufacturing and material defects for a period of one year from date of
purchase, subject to the following conditions and limitations: 1. Install and
operate this Electric Fireplace in accordance with the installation and
operating instructions furnished with the product at all
times. Any unauthorized repair, alteration, willful abuse, accident, or misuse
of the product shall nullify this warranty. 2. This warranty is non-
transferable and is made to the original owner, provided that the purchase was
made through an authorized
supplier of the product. 3. The warranty is limited to the repair or
replacement of part(s) found to be defective in material or workmanship,
provided that such
part(s) has (have) been subjected to normal conditions of use and service,
after said defect is confirmed by the manufacturer’s inspection. 4. The
manufacturer may, at its discretion, fully discharge all obligations with
respect to this warranty by refunding the wholesale price of the defective
part(s). 5. Any installation, labor, construction, transportation, or other
related costs/expenses arising from defective part(s), repair, replacement, or
otherwise of same, will not be covered by this warranty, nor shall the
manufacturer assume responsibility for same. 6. The owner/user assumes all
other risks, if any, including the risk of any direct, indirect or
consequential loss or damage arising out of the use or inability to use the
product, except as provided by law. 7. All other warranties – expressed or
implied – with respect to the product, its components and accessories, or any
obligations/liabilities on the part of the manufacturer are hereby expressly
excluded. 8. The manufacturer neither assumes nor authorizes any third party
to assume on its behalf any other liabilities with respect to the sale of the
product. 9. The warranties as ouUined within this document do not apply to
non-accessories used in conjunction with the installation of this product.
10. This warranty gives you specific legal rights, and you may also have
other rights which vary from state to state.
This warranty is void if: a. The fireplace is subjected to prolonged periods
of dampness or condensation. b. There has been unauthorized alteration,
willful abuse, accident, or misuse of the product. c. You do not have the
original receipt of purchase.
6
Operation
PRODUCT SPECIFICATIONS
Voltage Amps Watts
120 VAC, 60 Hz 11.7 amps 1400 watts
7
Operation {continued)
Remote Control
{continued)
1. Indicator light – Signal transmission indication. 2. Power Turns the
appliance on / off. 3. Celsius temperature – Press this button to change to
the Celsius temperature
state. 4. Fahrenheit temperature – Press this button to change to the
Fahrenheit
temperature state. 5. Heat – Turns the heat function on / off. 6. Temperature
increase – Press this button to increase the temperature. 7. Temperature
decrease – Press this button to decrease the temperature. 8. Decrease flame
speed – Press this button to decrease the flame speed. There are 5
flame speeds for your selection (F5, F4, F3, F2 and F1).
8
Operation {continued)
9. Increase flame speed – Press this button to increase the flame speed.
(F1-F2-F3-F4-F5).
10. Volume – Press this button to decrease / increase firewood burning sound.
11. Timer – Press this button to turn on the timer. Press again to select
timing. There are 10 timing options (30min, 1H, 2H, 3H, 4H, 5H, 6H, 7H, 8H,
and 9H). 12. Flame effect – Press this button to turn on / off the flame
effect. 13. Flame color – Press this button to change flame color. 14. Flame
brightness decrease – Press this button to decrease the flame intensity. 15.
Flame brightness increase – Press this button to increase the flame intensity.
9
Care and Maintenance
Make sure the unit is turned OFF and is unplugged, and the heating elements of heater are cool whenever you are cleaning the heater.
Clean the metal trim using a water-dampened soft, clean cloth. DO NOT use brass polish or household cleaners, as these products will damage the metal trim.
lubrication. However, periodic cleaning/vacuuming of the fan/heater and air intake/output vents is recommended.
Any other servicing should be performed by an authorized service representative.
WARNING: Make sure the power is turned off before proceeding. Any electrical
repairs or rewiring of this unit should be carried out by a licensed
electrician in accordance with national and local codes.
WARNING: If repairing or replacing an electrical component or wiring, the
original wire routing, color coding and securing locations must be followed.
WARNING: Disconnect power before attempting any
shock or personal injury.
WARNING: During any service of this appliance, the power to the unit must be
turned off. First turn the main power switch to the “OFF” position. Then
remove the electrical plug from the wall outlet.
WARNING: Electrical outlet wiring must comply with local building codes and other applicable regulations to reduce
WARNING:
the electrical system.
NOTE: When the heater is not in use, the heater should be stored in a dry
location, away from possible damage. The power cord should be stored properly
to avoid contact with hot or sharp objects.
Replacing the Remote Control Batteries
When the remote control stops operating or its range seems reduced, it is time
to replace the batteries.
1. Locate the battery compartment on the back end of the remote control. 2.
Slide the battery door open and remove the old batterie.s. 3. Insert 2 AAA
batteries. 4. Do not mix old and new batteries; do not mix alkaline, standard
(carbon-zinc), or rechargeable (ni-cad, ni-mh, etc) batteries. 5. Re-insert
the battery door.
NOTE: The batteries should be removed if the product is to be left unused for
a long time.
CAUTION: Do not attempt to recharge a non-rechargeable battery. Remove the
exhausted battery from the product.
10
Care and Maintenance (continued)
Disposal of Used Batteries
A battery may contain hazardous substances that could endanger the environment
and human health. This symbol marked on the battery and/or packaging indicates
that a used battery shall not be treated as municipal waste. Instead, it
shall be left at the appropriate collection point for recycling. By ensuring
the used battery is disposed of correctly, you will help prevent potential
negative consequences for the environment and
human health. The recycling of materials will help to conserve natural
resources. For more information about collection and recycling of used
batteries, please contact your local municipality, your waste disposal service
or the point of sale where you purchased this item.
11
Troubleshooting
Problem
No power. Logs do not glow.
E1 displayed on control panel with beep sound.
E2 displayed on control panel.
E3 displayed on control panel.
Fan motor continues to blow after unit is powered off.
Power cord gets warm to the touch.
Possible cause The unit does not have power.
The overheat sensor has been engaged. The ambient temperature sensor is broken
or not working correctly. Child lock function is active.
Normal operation.
Normal operation.
Solution
Check that unit is plugged into a standard 120 V outlet. Then make sure power
is set at “ON” position.
Unplug unit, wait 5-10 minutes, and then the sensor will reset itself. Plug
the unit back in and turn on the heater. If the problem persists, call
customer service.
Unplug unit, wait 5-10 minutes, and then the sensor will reset itself. Plug
the unit back in and turn on the heater. If the problem persists, call
customer service.
To inactivate the child lock function, hold the POWER button for 10 seconds.
This is a standard feature; the blower runs for an additional 20 seconds to
ensure heat will not be trapped inside the unit.
This is normal for a heater appliance as it requires more current to operate.
Check the connections of the appliance cord and the outlet. Make sure the plug
fits tightly into the outlet. During use, check the plug and outlet frequently
to determine if it is HOT; if so, discontinue use of the appliance and consult
with a qualified electrician to check or change the overheating outlet(s).
12
Questions, problems, missing parts? Before returning to the store, Call
Customer Service
8 a.m. – 5 p.m. CST, Monday – Friday,
877-430-0703 EMAIL:
resolutions@electricfireplacesdirect.com
Retain this manual for future use.