ARCHITESSA DYNAMEX Rise IT Pedestal System Installation Guide

ARCHITESSA DYNAMEX Rise IT Pedestal System

The Dynamex™ Rise-It Paver Pedestal System, is an integral part of your hardscaping installation. Designed to fully support the load of installed pavers and foot traffic, while reducing vibration & shock, the system is tested to withstand over 6,500 lbs of load. The main advantages of the Rise-It system are simplified and reliable installation, improved drainage and protection of critical roofing membranes and moisture barrier systems. Precision manufactured and durably made from 100% recycled materials; Due to their high-load bearing properties and ease of leveling, the Rise-It system can be used to convert unused roof space into valuable patio real estate. Apply over broken sidewalks or uneven concrete areas to convert them into well-drained, level surfaces for entertaining, storage, or improved access.

Assembly Guide

Applications

• Rooftops
•  Terraces & Decks
•  Patios
• Balconies, Verandas & Porches
• Around Swimming Pools

MULTIPLE PATENTS PENDING

CALCULATE QUANTITY OF PEDESTALS REQUIRED FOR YOUR JOB

Decks can be designed to any layout configuration. The number of pedestals required is directly proportional to the number of tiles or pavers utilized. Therefore we recommend that you determine the number of pavers needed first. Once the number of pavers has been established, the following formula will give an estimate of approximately how many pedestals will be needed:

METHOD #1:

1 <ormu1a:

• Pavers needed = Deck area/Paver area
• Pedestals needed = # Pavers needed + (Deck perimeter I Paver width)

Example: For 24″ x 24″ Pavers on 20′ x 50′ patio:

• Pavers needed = (20′ x 50′) I 2′ x 2′ = 250 pavers
• Pedestals needed = 250 + ((20′ + 20′ + 50′ + 50′) I 2′) = 320 pedestals

METHOD #2:

1. Count total number of pavers
2. Count the number of pavers around the entire perimeter and divide by two. Add the result to the total number of pavers from step 1.
3. Multiply your new total by 5% and round up. Add that number to get your total amount of pedestals needed.

EXAMPLE:

1. Total number of pavers: 15
2. Number of perimeter pavers (14) divided by two: 7
3. Calculate 5% of your new figure (15+7=22) and round up: 24

Product contributes to LEED 2009 or LEED V4 credits

www.usgbc.org

1. Heat Island Effect- LEED credit SSc7.1 & SSc7.2 (2 points possible)
2.  Recycled Content- LEED credit MRc4 (2 points possible)
3.  Regional Materials- LEED Credit MRc5 (2 points possible)
4.  Storm Water Design- LEED Credits SSc6.1 and SSc6.2 (2 points possible)
5. Innovation in Design- LEED Credit IDcl (5 points possible)
6. Construction & Waste Management- LEED credit MRc4 (2 points possible)
7. Low Emitting Materials – LEED Credit IEQ4.1 & 4.3 (3 points possible)

• Product is more energy-efficient in operation than similar products
• Product is more water-efficient than similar products
• Product is more durable and/or requires less maintenance than similar products
• Product contains post-consumer recycled content (100% Recycled Content)
• Product has been salvaged and reconditioned from previous use (100% Recycled)
• Product is recyclable or biodegradable after use

MAKE. CREATE. INNOVATE

PLEASE NOTE: THIS INFORMATION IS PROVIDED TO ALLOW COMPARATIVE EVALUATION OF REDWOOD PLASTICS AND RUBBER’S VARIOUS MATERIALS VS OTHER MATERIALS. ALL INFORMATION SUPPLIED BY REDWOOD PLASTICS AND RUBBER. IN RELATION TO ITS PRODUCTS, WHETHER IN THE NATURE OF DATA, RECOMMENDATIONS OR OTHERWISE, IS SUPPORTED BY RESEARCH AND BELIEVED TO BE RELIABLE. NO LIABILITY WHATSOEVER SHALL ATTACH TO REDWOOD PLASTICS AND RUBBER FOR ANY INFRINGEMENT OF THE RIGHTS OWNED OR CONTROLLED BY A THIRD PARTY IN INTELLECTUAL, INDUSTRIAL OR OTHER PROPERTY BY REASON OF THE APPLICATION, PROCESSING OR USE OF THE AFORE- MENTIONED INFORMATION OR PRODUCTS.

References

• Architessa
• USGBC | U.S. Green Building Council

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>