WAZNEY C10 Wireless Quick Charging Vehicle Holder Instruction Manual
- June 9, 2024
- WAZNEY
Table of Contents
WAZNEY C10 Wireless Quick Charging Vehicle Holder Instruction Manual
Parameter Description
- Product Name: wireless fast charging vehicle holder (intelligent induction type)
- Power: 15W/10W/7.5W Effective transmission distance:0-5mm Boundary
- dimension: 111 mm 70mm 46mm Host size:111mm 60mm 7.6mm
- Charging interface: TYPE-C USB
Model A functional Components
-
Frontal View
-
Side View
-
Backside View
Model B Functional Components
(Note: The device that does not support wireless charging can only be used if it is connected with a magnetic head)
-
Frontal View
-
Side View
-
Backside View
Specifications
- Weight: 112g
- Material: ABS / PC + magnesium aluminum alloy
- Input voltage / current: 5V / 2a, 9V / 1.67a
- Output power: 15W/10W/7.5W automatic identification
- Rated frequency: 110k-205khz
- Charging distance: 0 – 5mm
- Equipment supporting QC wireless fast charging, such as: HUAWEI P40Pro/Mate 30/Mate20/MateRS/Iphone13/ 13 Pro/13 Pro Max/iphonel2/12 Pro/iphone 12 Pro Max/ 11/11 Pro/11Pro Max/X/iphone XS Max/XR/iphone8/ 8 Plus/Samsung Galaxy Note20/Note10+/Note10+5G/ Note9 /note8 /S20 /S10 + /S10 /S9 + /S9 /S8 +and other support Wireless charger.
Instructions For Use
- Connect the product to the appropriate data cable during use
- Connect the USB end of the data cable to the vehicle interface(e.g. cigarette lighter converter and USB charging interface)
- The base clamp clamps the air outlet of the air conditioner, and can also be placed in other places that can be clamped
- After the equipment is connected with 5 — 9V DC power supply, it will automatically check the tension and closing once, The indicator light is on. When the object is 5cm-20cm close to the equipment, it will automatically Sense and open your arms, put in the mobile phone, and the device automatically clamps the mobile phone,At this time, the wireless fast charging will automatically charge the mobile phone (the mobile phone has wirelessA charging function). When taking out the mobile phone, you need to touch the upper right corner of the back, finger slcon sensing area, when the finger touches this position, the device will open automatically Take out your mobile phone with both arms
- The equipment has built-in overvoltage protection, over temperature protection, magnetic field protection and short circuit Protection. In case of abnormality, it will automatically stop working.
Precautions
- Do not over squeeze or collide with the equipment
- Do not use it under severe high temperature, humidity or corrosive environment This product can avoid damaging the circuit of the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Warning: changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment
Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator and your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>