IQsound IQ-7712DJBT Professional DJ Speaker Instruction Manual

IQsound IQ-7712DJBT Professional DJ Speaker

Product Information

Specifications:

• Model: XYZ-2000
• Dimensions: 10 inches x 5 inches x 3 inches
• Weight: 2 lbs
• Power: 120V AC
• Color: Black

Product Usage Instructions

Setup:
Place the product on a flat and stable surface near a power outlet.

Power On:
Connect the product to a 120V AC power source and switch on the power button located on the side of the product.

Operation:
Follow the specific instructions for the desired function using the control panel or remote control included with the product.

Maintenance:
Regularly clean the product with a soft, damp cloth. Avoid using harsh chemicals or abrasive materials.

Frequently Asked Questions

Q: How do I change the settings on the product?
A: Use the control panel or remote control to navigate through the menu options and adjust the settings according to your preference.

Q: Is this product suitable for outdoor use?
A: No, this product is designed for indoor use only and should not be exposed to outdoor elements.

Q: What should I do if the product malfunctions?
A: Refer to the troubleshooting section in the user manual for common issues and solutions. If the problem persists, contact customer support for assistance.

FEATURES

• Built-In BT
• Equalizer
• USB Input
• LED Light
• Micro SD
• Guitar Input
• Radio Input
• Extra Bass

Technical Specifications

• RMS Power: 150W
• Impedance: 4 Q
• Input Sensitivity: 100÷3 dB
• Frequency Response: 45-18K Hz
• S/N Ratio: ≥70dB
• Drive Unit: 1″+2×12″
• Wireless Mic Frequency: 261.8MHz
• BT Name: IQ-7712DJBT
• Power input: AC 100-240V 50/60Hz
• Audio Decoding Format: MP3 WMA WAV APE FLAC
• File Format: FAT32 and exFAT
• The max capacity of USB drives and MICRO-SD is 128GB

Each carton includes:

• Speaker x 1
• Wireless Microphone x 1
• Charging Cable x 1
• Microphone Bag Bracket x 1
• Remote Control x 1
• User Manual x 1
• microphone Bag x 1 Screw x 4

Safety Precautions

1. Power When working/recharging under AC power, please operate only under the power indicated on the instructions marked on the device.
2. Caution to Avoid Electrical Shocks Never plug or unplug the device with wet hands to avoid electrical shock. Do not place the device in a wet area under the rain or in a place where it can collect any liquid on its surface. Do not place any container with water or any other liquid on top of the device.
3. Do Not Ballast Heavy Objects Do not place any items on top of the device. This machine cannot bear any load. Avoid direct sunlight and keep it away from any heating source as stoves, radiators, etc. Do not install in environments with dust, high temperatures, strong lights magnetic fields, etc.
4. Power Line Protection Do not pull the cord; to disconnect from the electrical outlet pull the plug. Keep the power cord away from places where it could be stepped on, pinched, or tripped over. Do not place any heavy objects over the cord.
5. Do Not Dismantle the Case Serious electric shock may occur if you touch internal parts of the device. Prevent any metal pieces and liquids from dropping inside the device openings.
6. Power Line Protection When the unit is completely powered off, please disconnect the power cord, the plug is used for the power cut-off device and must be kept easy to operate.

Top Panels operating instructions

1. Micro SD jack
2. USB jack
3. AUX input
4. Guitar input
5. Microphone input
6. Recharging indicator
7. Red indicator light when charging, Green indicator light when fully charged, Charging time: 8 hours
8. Echo control
9. Delay control
10. Guitar Control
11. Volume control
12. Mode switch
13. REC key
14. Microphone priority
15. Extra Bass key
16. Bluetooth key/press for 3 seconds to Bluetooth cut-off
17. True wireless stereo key
18. Next key & folder key
19. Play/Pause key & FM scan key
20. Previous key& FM channel – key
21. LED switch
22. 5 EQ Function
23. Microphone Volume control
24. Microphone Bass control
25. Microphone Treble control

AUX interface input

AUX is a 3.5mm external audio source input interface, AUX you can connect mobile phones/computers/karaoke players/TVs/CDs/DVDs, and other external input audio sources, press the MODE key to select the AUX input mode

USB/SD playback

Insert USB/SD, the speaker will automatically read and PLAY, press PREV to select the previous music, press NEXT to select the next music, press PLAY/PAUSE to pause the play and press the number key of the remote control to play the digital music, you can build different categories of folders on the U disk or SD card to store the songs. The remote control has the function of switching between the previous folder and the next folder to choose to play different categories of songs

Operating instructions for Remote controllers

1. Mute Key
2. Prev folder key
3. EQ mode key
4. Previous key& FM channel – key
5. Record Key
6. Standby key
7. Next folder key
8. Folder Repeat key
9. Repeat key
10. Volume increase key
11. Play the pause key& FM scan key
12. Next key&FM channel + key
13. Volume decrease Key
14. Tracks select key
15. Mode key To select input signal source

FM Scan Instruction

M automatic radio search Press MODE to select the FM mode Press the Play Pause button on the control panel or the FM SCAN button/Play/pause button on the remote control, and the radio goes into automatic search mode, and the search starts from 87.5MHZ, and when the station is found, the station number will be automatically displayed and saved. Then continue searching for stations, and when the frequency reaches 108MHZ, complete the automatic radio search and play the first station. Last stop selection Press the PREV&FM CH combo button on the remote or the PREV button on the control panel to select the previous station Next stop selection Select the NEXT station by pressing the NEXT&FM CH+ composite button on the remote control or the Next button on the audio panel

Top Panels operating instructions

1. AC Input 100-240V 50/60Hz
2. Power Switch

Installation method of MIC bag bracket

MIC bag bracket needs to be installed manually, refer to the below steps:

1. Align 4 screw holes of the MIC bag bracket with 4 corresponding holes on the back of the speaker, as shown in Figure 1 2.
2. Tighten 4 screw holes in sequence, as shown in Figure 2

Operation wireless microphone

• This product built-in battery, especially suitable for outdoor concerts, advertising, entertainment, and other activities. Please charge the battery full first before using it in an outdoor environment. To ensurethat the speaker can be used for a long time for outdoor activities.
• To adjust the microphone volume knob to you like when you are demo.
• Please turn off the microphone after us iting.
• Wireless microphone effective distance within 10 meters. Too not affect the effect, please do not use over the valid range. When the battery decreases or the environment radio interference source signal is too strong, it will shorten the use distance.
• To achieve the best effect of singing, the distance between the mouth and the microphone should be kept at 5-15 cm, and the best angle should be 45 degrees.
• Please don’t use the same frequency of microphone to sing at the same time in a short distance. It will lead to silence or interference.
• If you buy more than two sets of active speakers with wireless microphones and want to use them together at the same time, please select the standard frequency of different varieties. If not, there must be 10 10-meter distance at least between two sets of speakers at the same frequency. So as not to cause interference and other unnecessary trouble. At the same time, don’t put speakers too close to VCD/CD/DVD during use. They are strong interference frequency equipment. To avoid mutual interference between the same frequency and directly affects the normal work of the wireless microphone signal receiving.

BT Operation

First connection of BT with cellphone

1. Turn the power on, press the “MODE” key or “INPUT” key on the panel or remote control, and switch the speaker to Bluetooth channel. Then turn on the mobile phone Bluetooth function.
2. Search the BT device list and select the BT name “IQ-7712DJBT”. The speaker will make a notification tone when the connection is successful.
3. Select the BT which is on BT device list. Open the mobile phone music player and play a song. The music is transferred via BT and sound comes out through the BT speaker.

Connect to the mobile phone which already been connected before.

When the mobile phone BT is turned on, press the”MODE”and select to BT mode, the BT speaker will automatically connect to the mobile phone which is connected last time. Another way is that you can search the BT list on your mobile phone, when you find the”IQ- 7712DJBT”, select it and connect your mobile phone to the BT speaker.

Warranty

Supersonic Inc. (“Supersonic”) warrants this product to the original purchaser ONLY, to be free from defects in materials and workmanship under normal use, for ninety (90) DAYS from the date of original purchase. Proof of purchase (receipt) is required. Please visit https://www.supersonicinc.com/pages/warranty for additional information.

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

• This device may not cause harmful interference, and
• This device must accept any interference received, including interference that may cause undesired operation. RF Exposure Information The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions and compliance with exposure requirements.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>