BLACK BOX PSE544-DE-R2 Power Switch Cabinet NG User Guide
- June 4, 2024
- BLACK BOX
Table of Contents
PSE544-DE-R2 Power Switch Cabinet NG
User Guide
Power Management over IP or USB
The unit is a power distribution unit (PDU) with a built-in web server. It
enables the user to individually control up to four devices connected to its
outlets, either over IP or USB.
It supports the main protocols used in the IT environment, such as HTTP, DHCP,
SNMP, SMTP, SNTP, and Syslog.
The internal real-time clock enables automatic and precise triggering of
scheduled actions and the time-stamping of all events, such as logs, SNMP
traps, and Syslog events.
IP Monitoring with Auto-Reboot
PSE544 is more than a simple power switch; it offers IP device monitoring with
an automatic reboot function in case of lock-up. So your router or IP camera
will no longer be blocked for hours or days waiting for your manual restart
action.
Safety instructions
Before operating this device, read the safety instructions in the User Guide.
Do not exceed 10A per outlet.
Do not exceed the input current draw of 16A.
Installation & Network parameter configuration
- Connect the PSE544 to your LAN (Local Area Network).
- Power up the PSE544 using the provided power cable, through a properly grounded outlet (read safety instructions in the PSE544’s User Guide)
- Use one of the three following methods:
A/ Configuration through the LAN using the Finder program (on the CD-ROM)
It is the simplest and fastest configuration method if you use the Windows
operating system.
It allows the user to configure the PSE544’s network parameters through your
local network.
- Start the Finder.exe program.
- In the toolbar, click on the first left button (SCAN) to discover the PSE544 connected to your LAN.
- In the toolbar, click on the second left button (Configure) to configure the network parameters. Then click on the OK button.
- In the toolbar, click on the first left button (SCAN).
- In the toolbar, click on the fourth button (Administration) to go to the Administration home page.
B / Configuration through the LAN using a standard Browser
Temporarily change the network settings of your PC according to the PSE544’s
default network settings.
Factory network settings of the PSE544
IP Address: 192.168.100.200 – Port: 80
Gateway: 255.255.255.0
Username and Password = admin
- Start your Web browser and enter this IP address: http://192.168.100.200/sysadmin.htm
- Enter admin for both the username and password.
The home page appears, allowing you to configure the PSE544’s settings.
C/ Configuration through a USB Terminal connection
- Use the provided USB cable to connect the PSE544 to the USB port of your PC.
- Run a Terminal program.
- On your PC, press
until the configuration menu appears on your screen. - Press “M” and follow the instructions on the screen to set the network parameters.
Controlling the power outlets over IP
After configuring the network parameters using one of the previous methods,
start your browser and enter the address of your PSE544 followed by
/sysadmin.htm.
Example: http://192.168.100.200/sysadmin.htm
Enter admin as Username and Password to:
- configure your PSE544
- set user accounts
- create rules
Do not forget to change the default administrator password!
Rules
PSE544 has a Real Time Clock with Scheduler and enables users to manage up to
32 rules and 4 types of rules (Scheduler, Timer, Ping, and Scan).
To configure a rule, click on “Settings / Rules.” Then click on “Add a new
rule.“
21 April 2022
© Copyright 2000-2022
All modifications reserved
PSE544-DE-R2_PSE544-FR-R2_QSG_REV1.PDF
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>