Blackview WAVE 8 Series 4G Smartphone User Guide

Blackview WAVE 8 Series 4G Smartphone

Specifications

• Model: WAVE 8 Series
• Compliance: ISED
• RF Exposure SAR Test Distance: 0mm for head, 10mm for body-worn
• Highest SAR1g Value: 1.158 W/Kg
• Frequency Range: 5150 to 5250MHz (Indoor use only)

FAQs

• Q: Can I use the device outdoors in the specified frequency range?
  • A: No, the device is restricted to indoor use only when operating in the 5150 to 5250MHz frequency range to comply with regulations.
• Q: What should I do if I need to use accessories with metallic components?
  • A: Avoid using accessories with metallic components as they may not comply with RF exposure requirements. Choose accessories that do not contain metallic parts to ensure compliance.

OVERVIEW

How to insert the card

• To make sure your smartphone be able to call, put the SIM card in the following order.
• Press the card pin into the side hole and then the card tray pops up and pull out it.
• Take out the card slot and place the Nano card or Nano card and TF card with the metal side facing down. Make sure the bevel angle is aligned with the bevel angle of the card slot and placed in the corresponding card slot.
• Insert the cardholder into the phone in the direction of the arrow.

How to boot

• Non-removable battery
• Press the power button for 3-5 seconds to boot

How to send SMS, MMS

SMS

• Open the SMS app
• Select New Information
• Enter a phone number or browse your contacts
• Select Edit Information and enter your text
• Send

MMS – video

• When writing a text message
• Select images, videos or other files you want to add, even You can take a new picture or video right away.
• Selecting or sending

Language switching settings

• Main menu-settings-system setting–language and input method
• Language and input method–language-language adding
• Select the language you need, the system will automatically jump back to the language interface.
• Select the icon after the language bar and drag it to the arst one.

Maintenance

• Thoroughly understand the maintenance of this mobile phone to use the mobile phone more safely and effectively, and extend the service life of the mobile phone as much as possible.
• Please follow the instructions in the manual to open the phone, disassemble the accessories, and do not try other methods.
• Please avoid falling, knocking or shaking your phone. Rough handling of the phone can cause the screen to rupture, damaging the internal circuit board and the delicate structure.
• Do not use chemical solvents or detergents to clean your phone. Wipe the phone case with a soft cotton cloth dampened with water or a mild soap.
• Clean the lens with a clean, dry, soft cloth. (Example: camera lens) and display.
• If you encounter an abnormal image such as a crash during use, the processing method is as follows: For a mobile phone that cannot remove the battery, please press and hold the power button for more than 12 seconds, the mobile phone will be forced to restart (unlock the phone when restarting) It can solve the general bug; for the mobile phone that can remove the battery, please remove the battery, then insert the battery and restart it to solve the bug.
• When the charger is not in use, please unplug it from the power outlet. Do not connect the battery that has been fully charged to the charger for a long time, as overcharging will shorten the battery life.

FCC Statement

This device complies with Part 15 of the FCC rules.

Operation is subject to the following two conditions: 1

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

RF Exposure Statement

SAR tests are conducted using standard operating positions According to FCC standards with the device transmitting at its highest certified power level in all tested frequency bands, although the SAR is determined at the highest certified power level, the actual SAR level of the device while operating can be well below the maximum value. This model product has been tested and meets the FCC RF exposure guidelines with a test distance of 0 mm for head and 10mm for body-worn. The highest SAR1g value is 1.158 W/Kg. The use of belt clips, holsters, and similar accessories should not contain metallic components in its assembly. The use of accessories that do not satisfy these requirements may not comply with FCC exposure requirements and should be avoided.

ISED RF Exposure statement

SAR tests are conducted using standard operating positions According to ISED standards the device transmits at its highest certified power level in all tested frequency bands, although the SAR is determined at the highest certified power level, the actual SAR level of the device while operating can be well below the maximum value. This model product has been tested and meets the ISED RF exposure guidelines with the SAR test with a distance of 0 mm for head and 10mm for body-worn. The highest SAR1g value is 1.158 W/Kg. The use of belt clips, holsters, and similar accessories should not contain metallic components in its assembly. The use of accessories that do not satisfy these requirements may not comply with RF exposure requirements and should be avoided. The device is restricted to indoor use only when operating in the 5150 to 5250MHz frequency range.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>