LILIN NVR Camera Standalone Network Video Recorder User Guide

September 22, 2024
LILIN

LILIN NVR Camera Standalone Network Video Recorder

Product Information

Specifications

  • Default IP: 192.168.0.111
  • Video Compression: H.265
  • Network Protocol: TCP/IP, DHCP, DNS, NTP
  • Storage: HDD
  • Supported Cameras: LILIN cameras

Product Usage Instructions

Setting Up the NVR

  1. Log in to the NVR using the default IP and create an Admin password.
  2. Set NVR network details (IP, Gateway, and DNS) in the Network Menu.
  3. Set the name of the NVR in the System settings.
  4. Enable NTP for accurate time synchronization.
  5. Format the HDD if not done already in the Storage settings.

Configuring Cameras

  1. Log in to each camera and check settings, especially the max frame rate in the Cameras Menu.
  2. Enable clock display on cameras and set camera names in the OSD settings.
  3. Add cameras to the NVR in the Camera Menu.
  4. Set cameras to H.265 compression with the best bitrate and frame rate for optimal performance.
  5. Enable sync time with NVR for accurate timestamping.

User Permissions and Connectivity

  1. Create users and set required permissions in the User settings.
  2. Enable P2P or create a DDNS address for remote access. Set up port forwarding if using DDNS.
  3. Add NVR to LILINPro App using DDNS or P2P for mobile access.

Configuring Additional Features

  1. Configure any AI modules on cameras for advanced functionality in the Camera AI Menu.
  2. In the NVR Alarm Menu, set alarm output to ‘IP Camera’ and add META data in the META Data Menu.
  3. Set up any required notifications in the Notifications section.

Frequently Asked Questions (FAQ)
Q: How do I access the NVR settings?
A: You can access the NVR settings by logging into the NVR using a web browser and entering the IP address in the address bar.

“`

LILIN New System Install Check List

Quick points to help install a new system

LILIN NVR and Camera Quick Points Guide

LILIN NVR and Camera Quick Points Guide

Log in to NVR and create an Admin password when requested

|

Default IP – 192.168.0.111

Set NVR Network Details – IP, Gateway and DNS

|

NVR –> Network Menu

Set Name of NVR

|

NVR –> System

Enable NTP

|

System –>Time

Set date the correct way for UK

|

System –>Time

Format HDD – Usually done for you already

|

System –> Storage

Log in to cams and Check cams – max frame rate (specific for each camera model/series)

|

Cameras Menu –> Setup –> Video

Enable clock on cams

| Setup –> System –> OSD –> Date
Set cam Names in camera| Setup –> System

Add cams to the NVR

|

NVR –> Camera Menu

Set the cams to H.265 and best bitrate and frame rate (this will update bitrate and frame rate on cameras)

|

NVR –> Camera Menu

Enable Sync time with NVR

|

NVR –> Camera Menu

Create and users and set required user permissions

|

System –> User

Enable P2P or Create DDNS address

If using DDNS, add a port forwarding rule in router

|

System –> DDNS Menu Site Router

Configure any AI modules on cameras

|

Camera AI Menu

 |
NVR Alarm menu set alarm output to ‘IP Camera’ NVR –> Alarm Menu

Add META data to NVR – META DATA menu

|

NVR –> META Data Menu

Set any notifications required

|

Alarm –> Output Menu –> Notifications

Add NVR to LILINPro App using DDNS or P2P

|

LILIN UK Technical Department

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals