LILIN P2P Pro Adding NVR Standalone Network Video Recorder User Manual

August 24, 2024
LILIN

LILIN P2P Pro Adding NVR Standalone Network Video Recorder

Product Information

Specifications:

  • Product: LILIN NVR
  • Remote Access: P2P support using LILINPro app

Product Usage Instructions

Enabling P2P on NVR

  1. Access the NVR menu.
  2. Navigate to Network’ and selectAdvance’.
  3. Under Advance’, chooseP2P’.
  4. Turn the dropdown option labeled Enable’ toOn’ and click `Apply’.

Adding NVR to LILINPro using P2P

  1. Download LILINPro from the app store.
  2. Run the LILINPro app and select `Add/Change Devices’.
  3. Select `Scan QR code’ and scan the QR code displayed on the NVR.
  4. Enter your Username, Password, and Device Name as per your site’s specifications.
  5. Press `Step 1′ to verify the entered details.
  6. Press `Step 2′ to connect to NVR and display cameras.

FAQ

Q: What should I do if the app does not connect to the cameras after Step 2?

A: Close the app and reopen it. The app should then display the cameras correctly.

Usage Instructions

  • LILIN NVR range supports P2P as the standard for remote access using the LILINPro app.
  • Although the NVR has the P2P license already added to the NVR the feature may need to be enabled before use.
  • Enter the NVR menu, then navigate to ‘Network’ from the menu bar on the left, and then select ‘Advance’ from the tabs at the top of the Network screen. Under the Advance menu, select ‘P2P’ from the bar to the left.
  • You will see a dropdown option labeled ‘Enable’, turn this option to ‘On’ and click ‘Apply’.
  • The NVR will now generate a unique QR code which is displayed below the license status box with the correct information based on the license key entered.
  • Now the QR code is configured on the NVR the next step will be to add the NVR to the LILIN Viewer app.

Adding an NVR to LILINPro using P2P

  • Download LILINPro from the relevant app store applicable to your mobile device.
  • Once downloaded, run the LILINPro app on your mobile device.
  • When the app opens, select ‘Add/Change Devices’ from the menu bar.
  • Now select the ‘Scan QR code’ option as shown below.
  • You will now need to scan the QR code being displayed on the NVR. Once scanned this will take you to a configuration screen where you will need to amend a few details specific to your site.

Please amend the following:

  • Username
  • Password
  • Device Name
  • The username and password you will need to enter are the authentication details for the NVR.
  • Once the required details have been entered press ‘Step 1’ from the bar at the bottom of the app.
  • The App will now check the information in Step 1 is correct.
  • Now press Step 2 and the app should start to connect to your NVR and display cameras.
  • If you find the app does not connect to the cameras after step 2 has been completed, it is recommended to close the app down and re-open it once again and the app should then display the cameras correctly.

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals