aiwa AI1202 Noise Cancelling Earphones User Guide

: September 21, 2024
: Aiwa

Table of Contents

aiwa AI1202 Noise Cancelling Earphones
Product Information
Product Usage Instructions
WHAT’S INCLUDED
Charging Case
POWERING ON/OFF
BLUETOOTH PAIRING
USING YOUR EARPHONES
SPECIFICATIONS
SAFETY PRECAUTIONS
FCC STATEMENT
WARRANTY
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

aiwa AI1202 Noise Cancelling Earphones

Product Information

Specifications:

Product Name: Prodigy Clear Plus Noise Cancelling Earphones
Model Number: AI1202
Included Items: Earphones, Charging Case, Eartips (Small, Medium, Large), USB-C Cable
Charging Time (Earbuds): 30 mins
Charging Time (Case): 3 hours
Bluetooth Pairing: TWS pairing, Bluetooth 5.0
Special Features: Active Noise Cancelling, Ambient Mode, Clear Calling, Low Latency Mode

Product Usage Instructions

Charging:
Tear Off First Use:
Before first use, remove the insulation film from the charging pads on both earbuds.
Place the earbuds in the case to start charging. Fully charge the case, which may take up to 3 hours.

Charging the Earbuds:
Place the earbuds in the case ensuring the charging contacts are aligned. It takes 30 mins to fully charge the earbuds.

Charging the Case:
Connect the USB-C cable to the case and a suitable USB charging adapter. Charging the case fully takes 3 hours.

Powering On/Off:
When using the earphones for the first time, place them in the case. They will turn on automatically when removed. To turn them off, place them back in the case.

Bluetooth Pairing:
After removing from the case, the earbuds will pair together. Pair them to your phone by connecting to “AIWA Prodigy Clear Plus” in your Bluetooth settings.

Using Your Earphones:

Left Earphone: Decrease Volume: Press, Previous Track: Double Press, Voice Assistant: Press and Hold for 2-3 Seconds, Answer Call: Press
Right Earphone: Increase Volume: Press, Next Track: Double Press, Play/Pause: Press and Hold for 2-3 Seconds, ANC ON/Ambient ON/Sound Modes OFF: Triple Press

Special Features:

Active Noise Cancelling (ANC): Cancels noise around you for clearer sound.
Ambient Mode: Counters passive noise reduction for specific sounds.
Clear Calling: Uses dual microphones to cancel noise pickup during calls.
Low Latency Mode: Reduces Bluetooth latency for better movie sync and gaming response.

FAQ:

Q: How do I reset TWS pairing if the earbuds do not pair together?
A: Forget the earbuds in your phone’s Bluetooth settings, place them back in the charged case, then wait at least 15 seconds for them to pair together before pairing them to your phone.

WHAT’S INCLUDED

AI1202 Earphones and Charging Case

A CLOSER LOOK

Charging Case

CHARGING

First Use
Before ﬁrst use remove the insulation ﬁlm from the charging pads on both earbuds. Place them in the case, they will start to charge, then at the same time charge the case fully. This can take up to 3 hours.

Charging the Earbuds
Place them in the case. Make sure the charging contacts of the earbuds are touching the charging contacts inside the case. Charging the earbuds fully from ﬂat takes 30 mins. The case indicator LED will turn on green when charging the earbuds and go oﬀ when they are charged. When you open the case or press the rear button the LED will also light up green for 8S and then either go oﬀ if they are charged or stay on if they are charging.

Charging the Case
Connect one end of the included USB-C cable into the Type-C port on the case. Plug the other end into a suitable 5V/1A USB charging adapter. Charging the case fully from ﬂat takes 3 hours.

POWERING ON/OFF

When ﬁrst using your earphones place them into the case. Remove them from the case and they will automatically turn on. Place them back into the case and close the lid and they will automatically When ﬁrst using your earphones place them into the case. Remove them from the case and they will automatically turn on. Place them back into the case and close the lid and they will automatically turn off.

You can also turn the earbuds on/oﬀ by holding the touch button for 8S

BLUETOOTH PAIRING

When removed from the case the earbuds will ﬁnd each other and pair together (TWS pairing). On ﬁrst use this might take 15S. Once they have paired together they are ready to pair to your phone.

Go to the Bluetooth settings menu on your phone. Make sure that Bluetooth is turned on. Connect to the device listed as “AIWA Prodigy Clear Plus.”

Troubleshooting
If for some reason the earbuds do not pair together you can reset the TWS pairing. ‘Forget’ the earbuds in your phones Bluetooth Settings. Place them back in the case (which must be charged). Now take them out and wait at least 15S for them to pair together. Only once they have paired together pair them to your phone.

USING YOUR EARPHONES

LEFT EARPHONE

Decrease Volume: Press
Previous Track: Double Press
Voice Assistant: Press and Hold for 2-3 Seconds
Answer Call: Press
Low Latency ON/Off: Triple Press

RIGHT EARPHONE

Increase Volume: Press
Next Track: Double Press
Play/Pause: Press and Hold for 2-3 Seconds
ANC ON/Ambient ON/ Sound Modes OFF: Triple Press

ANC (Active Noise Canceling)
ANC actively cancels noise around you so that you hear more clearly with less distraction.

Ambient Mode
counteract the passive noise reduction of the earphones. This is best for sounds.

Clear Calling
The Clear Calling feature uses two microphones to cancel noise pickup in your microphone channel on calls. Clear calling is always enabled when a call is made and can be used with ANC.

Low Latency Mode
This mode reduces the latency (time delay) inherent in Bluetooth connections . This mode gives best lip-sync performance for movies and fastest audio response for mobile gaming.

SPECIFICATIONS

BLUETOOTH VERSION: 5.3
BATTERY CAPACITY (EARPHONES): 40 mAH
PLAY TIME (ANC ON): UP TO 4.5 HOURS AT 50% VOLUME
PLAY TIME (ANC OFF): UP TO 7 HOURS AT 50% VOLUME
CHARGE TIME (EARPHONES): ~30 MINS
CHARGING CASE CHARGE TIME (via cable): ~AROUND 3 HOURS
FAST CHARGING: 5 MINUTES = 50 MINS PLAYTIME
CHARGES IN CASE: 3
CHARGING PORT: USB-C

SAFETY PRECAUTIONS

When using your earphones, basic safety precautions should always be followed including:

READ ALL INSTRUCTIONS BEFORE USING YOUR EARPHONES AND CHARGING CASE.
Do not use the product near water. Do not put on wet surfaces.
Only clean using a clean cloth.
Do not allow children to play with this product. This product contains small pieces that can be a choking hazard. Parental supervision is advised.
Do not expose this product to excessive heat or fire.
Do not expose this product to temperatures above 100°F. Keep out of direct sunlight.
Do not attempt to repair this product yourself. Contact a qualified service center if the product is in need of service.
Do not drop, crush, or expose this product to excessive physical force.
This product is not intended for commercial use.
When charging, keep all charging cables well ventilated. Do not keep your charging cable in contact with flammable materials such as bedding, linens or synthetic fabrics.

Maintenance and Care

Use a soft cloth or paper towel to clean your earphones. Never use any harsh chemicals or detergents for cleaning. Make sure your earphones are dry before charging.
When your earphones are not in use, they should be stored in a cool, dry place.
Never tug or yank on a cable while it is connected to your charging case. Connect and disconnect cables as carefully as possible.
Never expose your earphones to high temperatures, extreme cold.
Please recycle or dispose of your earphones properly based on the laws and rules of your municipality. Contact local recycling facilities and/or the manufacturer of your earphones for further information.

FCC STATEMENT

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

this device may not cause harmful interference, and
this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

WARRANTY

This warranty covers the original consumer purchaser only and is not transferable. This warranty covers products that fail to function properly UNDER NORMAL USAGE, due to defects in material or workmanship. Your product will be repaired or replaced at no charge for parts or labor for a period of one year.

What Is Not Covered By Warranty
Damages or malfunctions not resulting from defects in material or workmanship and damages or malfunctions from other than normal use, including but limited to, repair by unauthorized parties, tampering, modiﬁcation or accident.

To Obtain Warranty Service and Troubleshooting Information:
Call 877-397-8200 or visit our website at www.aiwa.co. To receive Warranty service along with the name and address of an authorized product service center, the original consumer purchaser must contact us for problem determination and service procedures. Proof of purchase in the form of a bill of sale or receipted invoice, evidencing that the product is within the applicable Warranty period(s), MUST be presented in order to obtain the requested service. It is your responsibility to properly package and send any defective products along with a dated copy of proof of purchase, a written explanation of the problem, and a valid return address of the authorized service center at your expense. Do not include any other items or accessories with the defective product. Any products received by the authorized service center that are not covered by warranty will be returned unrepaired.
©2022 Sakar International