detacolor Spyder Pro Sensor User Guide
- September 20, 2024
- detacolor
Table of Contents
detacolor Spyder Pro Sensor
QUICK START GUIDE
Scope of delivery
- Spyder Pro sensor
- Serial number
- Welcome card with link to software and support resources
- USB-A adapter
System requirements
- Windows 10, 11 32/64
- Mac OS X 10.14 – Mac OS X 14
- Monitor resolution 1280 x 768 or higher
- 16-bit graphics card (24 bit recommended)
- 1GB available memory (RAM)
- 500MB of available hard drive space
- Internet connection for downloading and activating the software
- USB-C or USB-A port
Support
Before you begin
Your monitor should be turned on for at least 30 minutes before using the Begin calibration process. Make sure there is no direct light on your screen falls.
Reset the monitor settings to factory defaults, if available. Disable all automatic brightness adjustment features your monitor.
Step 1 – Install and Activate
Install Spyder software from the Datacolor website. Follow up Once the
installation is complete, connect your Spyder and start the software Initiate
the activation and registration process. This will automatically start your
Guarantee.
Use the serial number included in your Spyder packaging to activate your software.
Step 2 – Prepare for Calibration
Make sure your Spyder is connected to a live USB port on your before you start
the Spyder application. Follow the step-by-step instructions on the screen.
Take the lens cap from the Spyder colorimeter.
Hang the Spyder over your screen when prompted and use the lens cap, which slides on the USB cable, as a counterweight, to hold it in position. If necessary, tilt your screen backwards so that the Spyder lies flat on your monitor.
Step 3 – Calibrate
The Spyder software guides you through the calibration process and creates a
custom monitor profile that manages your operating system and color Use
applications to correct the displayed colors. Click on “Help” in the bottom
left corner of the screen for help with any To maintain functionality of the
software. You can also read the user manual or this View calibration video to
help with calibration.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>