iclever BTH19 Wireless Headphones User Manual
- June 4, 2024
- iclever
Table of Contents
iclever BTH19 Wireless Headphones User Manual
Package Contents
Product Diagram
On/Off
- Power on: Switch the button to the “ON” direction. Then the LED indicator fishes blue for 1 second, and the colourful lights are on.
- Shutdown: Switch the button to “OFF” direction, and the headphone is turned off. The LED indicator fishes blue for 1 second and then goes off.
Bluetooth Pairing
- In the power-on state, switch the button to the “ON” direction; the colourful lights are on; Bluetooth enters the pairing state, and the red and blue lights fish alternately.
- Turn on the Bluetooth of the mobile phone. Then find and select the “iclever-BTH 19” Bluetooth pairing nine in the device list for Bluetooth pairing connection.
Light On / Off
Short press the “Light On/ Off” button to turn on/ off the light.
Volume Limit Gear Switching
- Press and hold the”+”&”-” buttons at the same time to switch the volume limit to 74dB, and the voice broadcast to”74dB”.
- Press and hold the”+” & “-” buttons at the same time to switch the volume limit to 85dB, and the voice broadcast to”85dB”.
- Press and hold the”+” & “-” buttons at the same time to switch the volume limit to 94dB, and the voice broadcast to”94dB”.
Operation of Buttons
Voice Prompt
Specification
How to Charge the Headphone
Connect the Type-C cable to the Type-C port on the headphone, and a 5V power outlet (power adapter is not included). The indicator light will glow red to indicate charging. When the headphone is fully charged, the indicator light will change from red to blue.
FCC Statement
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
– Consult the dealer or an experienced rad to/TV technician for help.
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions.
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference
that may cause undesired operation.
Hereby, Thousand shores Deutschland GmbH declares that the radio equipment
type Wireless Headphones BTHl 9 is in compliance with Directive 2014/53/EU.
The full text of the EU declaration conformity is available at the following
internet address:
Http://files.iclever.com/BTHl9-DOC-EN.pdf
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>