LIVE IAEBTO34 v3194-01 Truly Wireless Open Ear Earbuds User Guide

September 19, 2024
LIVE

LIVE IAEBTO34 v3194-01 Truly Wireless Open Ear Earbuds

Product Information

Specifications:

  • Product Name : Truly Wireless Open Ear Earbuds
  • Design : Open Ear
  • Connectivity : Wireless
  • Input : DC IN
  • RF Exposure : General RF exposure requirement met

Product Usage Instructions

  • Charging:
    Use the provided DC IN cable to charge the earbuds. Make sure the earbuds are fully charged before first-time use.

  • Pairing:
    Turn on the earbuds and activate Bluetooth on your device. Search for the earbuds in the Bluetooth settings and pair them with your device.

  • Wearing:
    Place the earbuds in your ears, ensuring they fit comfortably and securely. Adjust as needed for the best fit.

  • Playing Music:
    Once paired, play music or audio on your device, and it will be wirelessly transmitted to the earbuds for listening.

Controls and Functions

On-Ear Controls
Note : The Control Touch Pad is sensitive and must be touched or tapped within the circle on the earbud to operate properly.

  • General
    Tap and hold for 5 seconds to power ON/OFF.

  • Phone Calls
    Tap to answer/end phone calls.

  • Voice Assist
    Tap and hold for 2 seconds to activate Voice Assistant.

  • Music

    • Tap to play/pause music.
    • Tap twice to skip to the next track (RIGHT).
    • Tap twice to play the previous track (LEFT).
    • Tap 3 times to turn volume up (RIGHT).
    • Tap 3 times to turn volume down (LEFT).

Charging the Case

The earbuds have a total battery life of approximately 6.5 hours at 50% volume. To charge the case, use the USB-C to USB cable (included), to connect to the USB port of a powered-on computer or a UL-certified USB power adaptor (not included). The Power Level LED Display will display the charge level of the case with a numeric value between 1-100. The Power Level LED Display will also indicate when the earbuds are charging. The total charge time for the case is approximately 2 hours. The case holds 1.5 additional charges for the earbuds.

Charging the Earbuds

  1. Open the cover following the arrow on the front side of the case and place the earbuds on the charging contacts. Be sure to match the left and right earbuds with the correct docking station in the case.
  2. The Power Level LED Display will display the battery levels of the earbuds as they charge. Charging time for the earbuds is approximately 2 hours.

Charging Case & Auto-On Feature

While the case power is ON:

  • Placing the earbuds in the charging case and closing the case will automatically power the earbuds off and begin charging them.
  • Removing the earbuds from the case will automatically power them on, link them, and connect to the last used Bluetooth device (earbuds must have been linked and connected to a Bluetooth device already).

Quick Charge

  • The 10-minute quick charge supports approximately 50 minutes of playback.
  • The 20-minute quick charge supports approximately 1.5 hours of playback

Pairing Bluetooth

Note : When earbuds are powered on, they automatically link and enter pairing mode. You can power on a single earbud to use as a single unit if you wish.

  1. With the earbuds powered on, you can connect to your Bluetooth device.
  2. On your Bluetooth device, search for nearby devices in your Bluetooth settings and select IAEBTO34. When successfully connected to your Bluetooth device, a voice prompt will announce “Bluetooth connected.”
  3. Audio played through the connected Bluetooth device will now be heard through both earbuds. Use the controls on the connected device to play audio and adjust the volume.

PLEASE NOTE: Due to the nature of truly wireless earbuds, you may experience slight interruptions with your audio in areas with multiple 2.4 GHz bands or high wireless traffic areas.

Reconnect Bluetooth

If you have trouble connecting the earbuds and your device or if the earbuds become unpaired, do the following:

  1. Delete IAEBTO34 from your list of devices in your Bluetooth settings
  2. Press and hold the Control Touch Pad for 5 seconds to turn the earbuds off. Press and hold the Control Touch Pad for another 5 seconds to turn the earbuds back on.
  3. Return the earbuds to the case. Remove them and allow them to automatically enter pairing mode. Connect to your Bluetooth device using the steps above.

Customer Support

Copyright © 2024 Digital Products International (DPI, Inc.) All other trademarks appearing herein are the property of their respective owners. Specifications are subject to change without notice.

FCC Warnings

Warning:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. this device may not cause harmful interference, and
  2. this device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However. there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and the receiver
  • Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help

NOTE: This device and its antenna(s) must not be co-located or operated in conjunction with any other antenna or transmitter

The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

Additional Warnings

  • To prevent fire or shock hazards, do not expose this unit to rain or moisture.
  • Where the mains plug or appliance coupler is used as the disconnect device, such disconnect device shall remain readily operable.
  • Lithium batteries, like all rechargeable batteries, are recyclable and should be recycled or disposed of according to state and local guidelines. They should never be disposed of in normal household waste, and they should never be incinerated, as they might explode. Contact your local government for disposal or recycling practices in your area.
  • This product meets and complies with all Federal regulations.
  • To avoid hearing damage, make sure that the volume on your music player is turned down before connecting your headphones. After placing headphones in/on your ears, gradually turn up the volume until you reach a comfortable listening level.
  • This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm.
  • For more information go to www.P65Warnings.ca.gov. This product meets and complies with required Federal product guidelines.

FAQ

Q: How do I reset the earbuds?
A: To reset the earbuds, place them in the charging case and hold the reset button for 10 seconds until the LED indicators flash.

Q: Are the earbuds water-resistant?
A: These earbuds are not water-resistant, avoid exposing them to moisture or liquids.

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals