TECSHOW 3 In 1 Effect Strobebox User Manual
- September 19, 2024
- TECSHOW
Table of Contents
TECSHOW 3 In 1 Effect Strobebox
Specifications
- Product Name: Strobe 3-in-1 Strobe Effect
- Model: STROBEBOX
- DMX Channels: 12/45 channels
- Power Supply: AC 100-240V, 50/60Hz
- Power Consumption: 50W
- Dimensions: 10 x 5 x 3 inches
- Weight: 2 lbs
Product Usage Instructions
Safety Precautions
Before installing or operating the unit, please ensure the following safety measures:
- Read the user manual carefully.
- Mount the fixture in areas away from walking paths and seating areas.
- Ensure the installation area can hold a load of at least 10 times the device’s weight.
- Always use a safety cable as a secondary attachment.
- Keep the fixture at least 0.5m away from flammable materials.
Installation
Follow these steps to install the Strobe 3-in-1 Strobe Effect:
- Securely mount the fixture in a suitable location.
- Use the supplied safety cable as an additional security measure.
- Avoid standing directly below the device during installation or servicing.
- Ensure the fixture is placed at a safe distance from any flammable objects.
Operation
To operate the Strobe Effect, follow these guidelines:
- Refer to the DMX Channels section in the manual for detailed information on channel settings.
- Select the desired channel mode and working mode based on your requirements.
- Adjust the color settings, strobe effects, and speed controls as needed.
- Utilize the sound control feature for dynamic lighting effects.
Frequently Asked Questions
- Q: How do I set up the DMX channels for different effects?
- A: Refer to the DMX Channels section in the manual for specific channel values and descriptions for various effects.
- Q: Can I use this product outdoors?
- A: It is recommended to install the fixture in covered outdoor areas to protect it from environmental elements.
- Q: What is the power supply requirement for this unit?
- A: The Strobe 3-in-1 Strobe Effect operates on AC 100-240V, 50/60Hz power supply.
INTRODUCTION
For your own personal safety, please read and understand this manual completely before you attempt to install or operate this unit!
- Please keep this User Manual for future reference. If you sell the unit to another user, be sure that he also receives this instruction booklet.
- Unpack and check the unit carefully that it has not been damaged during transport before using the unit.
- Before operating, ensure that the voltage and frequency of power supply match the power requirements of the unit.
- The unit should be connected to a main socket outlet with a protective earth connection.
- The unit is for indoor use only in a dry location.
- The unit must be installed in a location with adequate ventilation, at least 0,5m from adjacent surfaces. Be sure that no ventilation slots are blocked.
- Disconnect mains power before fuse replacement or servicing.
- Replace fuse only with the same type.
- Make sure there are no inflammable material close to the unit during operation.
- Use safety cable when fixing this unit. In the event of serious operating problem, stop using the unit immediately.
- Never try to repair the unit by yourself. Repair carried out by unskilled people can lead to damage or malfunction.
- Please contact the nearest authorized technical assistance center and always use the same type of spare parts.
- Do not touch any wires during operation as high voltage might be causing electric shock.
CAUTION!
For added protection mount the fixtures in areas outside walking paths ,seating areas,or in areas were the fixture might be reached by unauthorized personnel
Before mounting the fixture to any surface ,make sure that the installation area can hold a minimum point load of 10 times the device’s weight. Fixture installation must always be secured with a secondary safety attachment ,such as an appropriate safety cable. Never stand directly below the device when mounting ,removing ,or servicing the fixture, from a ceiling,or set on a flat level surface (see illustration below). Be sure this fixture is kept at least 0.5m (1.5ft) away from any flammable (decoration etc.) Always use and install the supplied safety cable as a safe cable as safety measure to prevent accident damage and /or injury in the event the clamp fails.
DISPLAY MENU
| Addr | A001 | A512 | Address code selection | |
|---|---|---|---|---|
| Chnd | 12Ch | 45ch | 117ch | Channel mode selection |
| Mode | Mast | D512 | Working mode selection | |
| SoUn | Su0 | Su59 | Sound control effect | |
| Se00 | Se99 | Sound control sensitivity | ||
| Auto | Au 0 | Au59 | Auto effect | |
| Sp1 | Sp 9 | Auto effect speed | ||
| Colo | Co1 | Co 7 | Static color selection |
Muan
| Red| 0| 255| Red
Green| 0| 255| Green
Bule| 0| 255| Blue
White| 0| 255| White
Strobe| 0| 255| Strobe
dSIP| dSIP| | | Display upside down
Ver| V10| –| Machine version
DMX CHANNELS
12 CHANNEL
| CHS | CH VALUE | FEATURE DESCRIPTION |
|---|---|---|
| 1 | 000-255 | All dimmer 0–100% |
| 2 | 000-255 | strobe-5050 |
| 3 | 000-255 | Dimmer red-5050 0-100% |
| 4 | 000-255 | Dimmer green-5050 0-100% |
| 5 | 000-255 | Dimmer blue-5050 0-100% |
| 6 | 000-255 | Dimmer white-3535 0-100% |
7
| 000-007| No function
008-131| No function
132-139| No function
140-181| Pulse effect slow to fast, fast close and slow open
180-189| No function
190-231| Pulse effect slow to fast, slow close and fast open
232-255| Pulse effect slow to fast, slow close and fast open
8
| 000-007| No function
008-12| Color chase 1
13-16| Color chase 2
…| …
227-247| Color chase 59
248-255| Sound controlled strobe
9
| 000-007| No function
008-12| Pattern 1
13-16| Pattern 2
…| …
227-247| Pattern 59
248-255| Pattern 60
10| 000-255| Run Color
11| 000-255| Run Background Color
12| 000-255| Speed control slow-fast
45 CHANNEL
| CHS | CH VALUE | FEATURE DESCRIPTION |
|---|---|---|
| 1 | 000-255 | All dimmer 0–100% |
| 2 | 000-255 | Strobe-5050 |
| 3 | 000-255 | Dimmer white-3535 0-100% |
4
| 000-007| No function
008-131| Strobe effect slow to fast
132-139| No function
140-181| Pulse effect slow to fast, fast close and slow open
180-189| No function
190-231| Pulse effect slow to fast, slow close and fast open
232-255| No function
5| 0-255| Color 1
6| 0-255| Color 2
7| 0-255| Color 3
8| 0-255| Color 4
9| 0-255| Color 5
10| 0-255| Color 6
11| 0-255| Color 7
12| 0-255| Color 8
13| 0-255| Color 9
…| …| …
…| …| …
40| 0-255| Color 36
41
| 000-007| No function
008-12| Color chase 1
13-16| Color chase 2
…| …
227-247| Color chase 59
248-255| Sound controlled strobe
42
| 000-007| No function
000-007| No function
13-16| Pattern 2
…| …
227-247| Pattern 59
248-255| Pattern 60
CHS| CH VALUE| FEATURE DESCRIPTION
---|---|---
43| 000-255| Run Color
44| 000-255| Run Background Color
45| 000-255| Speed control slow-fast
117 CHANNEL
| CHS | CH VALUE | FEATURE DESCRIPTION |
|---|---|---|
| 1 | 000-255 | All dimmer 0–100% |
| 2 | 000-255 | Strobe-5050 |
| 3 | 000-255 | Dimmer white-3535 0-100% |
4
| 000-007| No function
008-131| Strobe effect slow to fast
132-139| No function
140-181| Pulse effect slow to fast, fast close and slow open
180-189| No function
190-231| Pulse effect slow to fast, slow close and fast open
232-255| No function
5| 0-255| Red 1 0-100%
6| 0-255| Green 1 0-100%
7| 0-255| Blue 1 0-100%
8| 0-255| Red 2 0-100%
9| 0-255| Green 2 0-100%
10| 0-255| Blue 2 0-100%
11| 0-255| Red 3 0-100%
12| 0-255| Green 3 0-100%
13| 0-255| Blue 3 0-100%
…| …| …
110| 0-255| Red 36 0-100%
111| 0-255| Green 36 0-100%
112| 0-255| Green 36 0-100%
113
| 000-007| No function
008-12| Color chase 1
13-16| Color chase 2
…| …
227-247| Color chase 59
248-255| Sound controlled strobe
114
| 000-007| No function
---|---|---
008-12| Pattern 1
13-16| Pattern 2
…| …
227-247| Pattern 59
248-255| Pattern 60
115| 0-255| Run Color
116| 0-255| Run Background Color
117| 0-255| Speed control slow-fast
- amproweb.com
- FB /amprogroup
- youtube /amprogroup