TECSHOW DOME W4.5 Wall Mount Speaker User Manual

TECSHOW DOME W4.5 Wall Mount Speaker

Product Information

Specifications

• Product Name: DOME W4.5 Wall Mount Speaker
• Speaker Type: Wall-mount
• Number of Speakers: 4
• Tweeter Size: 0.5″
• RMS Power: 20W
• Frequency Range: 90Hz-18KHz
• Sensitivity: 85 dB (1W/1D)
• Impedance: 8 ohm

Product Usage Instructions

Safety Instructions

Thank you for purchasing the DOME W4.5 Wall Mount Speaker.
Before installation and use, please read and thoroughly understand the entire user manual. Keep the manual for future maintenance.

IMPORTANT:

MT Power has provided accurate instructions for assembly and installation. If you have any doubts, consult a qualified professional fitter. MT Power does not assume liability for any difficulties or problems arising from the interpretation of these instructions. Please use the brackets and accessories only for their intended purpose.

MT Power, its commercial distributors, and retailers are not responsible for any damage to persons or properties resulting from the unsafe or improper use of this product. Due to small hardware parts, keep the product away from children.

Installation Instructions

Note: Ensure that you have checked the reliability of the wall structure and firmly attached the speaker during installation. The user is responsible for this.

1. Do not install the speakers on fine wood or soft wall material, as the screws may become loose, leading to speaker crash or breakdown and personal injury.
2. Avoid using nails, adhesives, or unauthorized devices for installation, as long-term use and vibrations may cause the speakers to fall.
3. Avoid placing the speakers on a turntable or movable support.
4. Do not touch or bump the woofer and tweeter, as they may get damaged and result in distorted sound.
5. When changing the input source at a high volume (e.g., tuning FM/CD), reduce the volume to prevent potential damage. Ensure that the power amp/amplifier device is turned off during installation or removal of cables.
6. Do not clean the speakers with chemical solvents, as this may damage the paint surface. Clean with a dry cloth instead.

Installation Steps

1. Using the provided template, mark the mounting bracket’s hole slots on the wall or ceiling.
2. Use appropriate hardware and tools (not supplied) to securely fix the bracket to the wall/ceiling. Attach the speakers to the bracket using the screws and washers according to the speaker’s specifications.

Frequently Asked Questions

• Q: Can I install the DOME W4.5 Wall Mount Speaker on a soft wall material?
  • A: No, it is not recommended to install the speakers on fine wood or soft wall material, as this may cause the screws to become loose and result in speaker damage or personal injury.
• Q: Can I clean the speakers with chemical solvents?
  • A: No, it is advised not to clean the speakers with chemical solvents, as this may damage the paint surface. Please use a dry cloth for cleaning.

OVERVIEW

DOME W4.5 WALL MOUNT 4.5’’ SPEAKER DOME W8 is a wall-mount speaker. The unit has a 4” speaker, a 0.5” tweeter, and 20W RMS power. The DOME W series is ideal for commercial facilities,
buildings, offices, bars, or any type of application where a comprehensive, efficient, and low-profile solution is sought.

Technical specifications

SAFETY INTRODUCTION

Thank you for buying a wall-mount speaker. Please read and have a thorough understanding of the entire manual before installation and use. Keep the manual for maintenance.

IMPORTANT: MT Power has made every effort to provide accurate and detailed instruction for this product’s assembly and installation. Should you have any doubts consult a qualified professional fitter, MT Power recognizes no liability for any difficulty or problem derived from the interpretation of these instructions. These brackets and all their parts and accessories must only be used for the purpose they have been constructed.

Read these instructions carefully before using the product

1. When the speakers are installed in walls, check that the wall structure is reliable and that the speaker is firmly attached. The user should be responsible for this very thing.
2. Do not install the speakers in fine wood or soft wall material because the screws can get loose, causing the crash or breakdown of the speakers and personal injury.
3. Do not use nails, adhesives or other unauthorized devices. Long-term use and vibrations may cause it to fall easily.
4. Do not place the speakers on a turntable or movable support.MT Power, its commercial distributors and retailers are not , directly or indirectly, responsible for any damage to persons and or properties derived from the use of this product in an unsafe or different way for which it has been designed and constructed. Several parts of this product are small pieces of hardware therefore extreme care should be taken to keep them from children.
5. Do not touch or bump the woofer and tweeter. If these are damaged, the sound will be distorted. Do not listen to sound at a very high level when you are changing the input source (for example, to tune FM/ CD) Installation or removal of cables should make sure that the power amp/ amplifier device radio is turned off.
6.  Not attempt to clean the speakers with chemical solvents as this may damage the paint surface. Clean with a dry cloth.

INSTALLATION

USERS HAVE A RESPONSIBILITY TO PLACE OR INSTALL SAFETY.
The speakers that are placed in the holder can be either wall or ceiling type, using screws to be placed inside of the speakers in the back is optional.

1. Mark the mounting bracket as a template with the regional location of the hole slots.
2. Then use the appropriate hardware and tools (not supplied) are properly fixed to the bracket wall/ceiling
3. Place the speakers to the bracket using the screws and washers according to the speaker.

CONNECTION

Use wire on the back of the speaker in the output tab of the amplifier (or amplifiers of radio). The speaker wire is on one side red and on the other one black. Connect the red side of the amplifier and speakers (+) tab. Connect one end of the blackside(-) in the other tab. Connect each speaker to make sure that is not(+,-) inverted polarity. If the polarity of the speakers is reversed, the sound will be unnatural and will play without bass.

• Fasten the bracket to on the wall by 2 pcs screws

• Connect the speaker cable to U the terminal(“+”to”+”,”-”to”-”+)

• Secure the box to the bracket UNDERPOWERING VS OVERPOWERING

• Most speaker damage is caused by amplifiers with too little power (wattage).

• An overdriven amplifier clips the waveforms and sends distortion to the speakers.

• Clipping is usually audible; ii may vary from a harsh sound to a fuzzy or unclear sound.

• If you hear this condition at loud volume levels, turn down the volume until the distortion is no longer present.

• Damage caused by operating the speakers at distorted volume levels is not covered by the warranty.

CHANNEL AMPLIFIER WITH 8 OUTPUT

• FB: /amprogroup
• YOUTUBE: /amprogroup

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>