TECSHOW Halo 400 LED BSW Cmy Cto Moving Head Light User Manual
- June 4, 2024
- TECSHOW
Table of Contents
Halo 400 LED BSW Cmy Cto Moving Head Light
HALO 400 LED 400W LED BSW CMY + CTO MOVING HEAD LIGHT
USER MANUAL
PLEASE READ THE INSTRUCTIONS CAREFULLY BEFORE USE POR FAVOR LEA LAS INSTRUCCIONES ANTES DE USAR
1· OVERVIEW
HALO 400 LED
400W LED BSW CMY + CTO MOVING HEADLIGHT
HALO 400 LED is a compact and powerful moving beam head featuring 1 x 400W white LED. With a zoom range of 4 to 35 degrees this versatile luminaire naturally excels in medium to large scale moving applications. The fixture has an 8-colour + open wheel with integrated CMY + CTO. Halo 400 LED incorporates a separate 6-colour + white wheel for rainbow gobos. Halo 400 LED also has two independent prisms of 6 and 8 facets that can be operated independently or together, thus providing multiple options when it comes to staging.
Specifications
Source & Optics
- Light Source: Imported new 400W LED Module engine.
- Average lifespan: 50,000 hours.
- Power: 430W
- Spot zoom angle: 4-35º
- Wash angle: 10-50º
- Lifespan: 50,000 hours
- Color temperature: 8000K CRI>95
Efects & Functions
- Dimming system: 0-100% linear adjustment. Focusing system: linear adjustment from 4 meters to 50 meters.
- Frost: 1 independent frost filter, sof and natural light spot.
- High-speed strobe: 0-30 times/sec.
- Adjustable speed strobe efect. Strobe macro function.
Control
- Channel mode: 23 /21 channel.
- Display mode: LCD display, key + touch dual operation mode.
- Control signal: International standard DMX512.
- With RDM function, online sofware upgrade is available, dial address code.
- Color: 8 colors + open.
- Color half-color function.
- Color mixing system: linear CMY+CTO color mixing system.
- Fixed gobos: 12 fixed patterns + open.
- Rotating gobos: 7 glass patterns, each glass pattern can be independently forward & reverse.
- Prism system: standard single 6-facet prism and 8 prism, each prism can be independently forward & reverse.
- Macro function: console reset function, self propelled mode, master-slave mode.
Movement
- Pan: 540° (16 bit precision scan) electronic error correction.
- Tilt: 190° (16 bit precision scan) electronic error correction.
Physical
- Cooling method: Adopt axial fan to enhance cooling.
- Safety device: with electronic temperature control overheating protection, electronic temperature control automatic power-of protection when the overheating system fails
- Appearance material: high temperature resistant plastic.
- Working environment: -20 degrees – 40 degrees
- Display: LCD
- IP20 certification
- Weight: 26 Kgs
- Dimensions: 38x27x65 cm.
2. INTRODUCTION
For your own personal safety, please read and understand this manual completely before you attempt to install or operate this unit!
- Please keep this User Manual for future reference. If you sell the unit to another user, be sure that he also receives this instruction booklet.
- Unpack and check the unit carefully that it has not been damaged during transport before using the unit.
- Before operating, ensure that the voltage and frequency of power supply match the power requirements of the unit.
- The unit should be connected to a main socket outlet with a protective earth connection.
- The unit is for indoor use only in a dry location.
- The unit must be installed in a location with adequate ventilation, at least 0,5m from adjacent surfaces. Be sure that no ventilation slots are blocked.
CAUTION!
- Disconnect mains power before fuse replacement or servicing.
- Replace fuse only with the same type.
- Make sure there are no inflammable material close to the unit during operation.
- Use safety cable when fixing this unit. In the event of serious operating problem, stop using the unit immediately.
- Never try to repair the unit by yourself. Repair carried out by unskilled people can lead to damage or malfunction.
- Please contact the nearest authorized technical assistance center and always use the same type of spare parts.
- Do not touch any wires during operation as high voltage might be causing electric shock.
For added protection mount the fixtures in areas outside walking paths ,seating areas,or in areas were the fixture might be reached by unauthorized personnel.
Before mounting the fixture to any surface ,make sure that the installation area can hold a minimum point load of 10 times the device’s weight.
Fixture installation must always be secured with a secondary safety attachment ,such as an appropriate safety cable.
Never stand directly below the device when mounting ,removing ,or servicing the fixture, from a ceiling,or set on a flat level surface (see illustration below). Be sure this fixture is kept at least 0.5m (1.5f) away from any flammable (decoration etc.)
Always use and install the supplied safety cable as a safe cable as safety measure to prevent accident damage and /or injury in the event the clamp fails.
3. MENU FUNCTION
DMX
Address
|
DMX Address
|
001-512
---|---|---
DMX channel mode
|
DMX 23 / 21channel
Motor reset
|
Work
Mode
|
DMX Ctrl
|
Open
Auto Run
|
Sound Ctrl
|
Sense mode
|
Auto
|
1-10
M/S choose
|
Auto
|
Slaver mode
|
Master mode
Fan Mode
|
Normal
|
Mode 1
|
Mode 2
Display
|
Language
|
Chinese
|
English
Screen Saver
|
of
Mode 1
Mode 2
Mode 3
Mode 4
Screen Rot
|
Auto
Reverse
Forward
DMX indicate
|
Normal
Mode 1
Mode 2
Signal Bright
|
1-10
Screen light
|
1-10
Touch Enable
|
ON
|
OFF
Touch Rectify
|
Scene
|
Scene select
|
1-10
Scene time
|
1-255S
Control Mode
|
ON
OFF
Scene
|
1. Pan
|
001-512
---|---|---
2. Pan Fine
|
0-255
3. Tilt
|
0-255
4. Tilt Fine
|
0-255
5. PT Spd
|
0-255
6. Dimmer
|
0-255
7. Strobe
|
0-255
8. Colour
|
0-255
9. CTO
|
0-255
10. Cyan
|
0-255
11. Magenta
|
0-255
12. Yellow
|
0-255
13. Gobo
|
0-255
14. Zoom
|
0-255
15. Focus
|
0-255
16. Rot Gobo
|
0-255
17. Gobo Rot
|
0-255
18. Prism 1
|
0-255
19. Prism 1R
|
0-255
20. Prism 2
|
0-255
21. Prism 2 R
|
0-255
22. Frost
|
0-255
23. Reset
|
0-255
Advanced
|
Pan invert
|
Open
|
Close
Tilt invert
|
Open
|
Close
P/T rectify
|
Open
|
Close
Pan ofset
|
4-150
Tilt ofset
|
4-48
Dimmer Mode
|
Normal
|
Mode 1
|
Mode 2
Data hold
|
Open
|
Close
Scene time
|
1-255
Factory setting
|
Open
|
Close
Status
|
Stepper info
|
---|---|---
Error logging
|
Fixture status
|
Tep
Version
|
H3.12
Light time
|
Total time
|
Serial
|
FUNTION MODE:
1. SET DMX ADDRESS
Click and select the ADDR, can enter the page of DMX address setting, range from 1 to 512, the address code shouldn’t is not greater than (512- channels quantity), otherwise the light will not been controlled.
Following is the operation:
2. SET LIGHT WORK MODE
Enter the page of WORK MOD and modify setting. Can set light work mode, control lamp and DMX channel mode. Light includes 3 work mode: DMX MODE, AUTO RUN and SOUND MODE, Parameter definition as following:
• DMX MODE: Under this mode, the light receive data from the DMX controller and move.
• AUTO RUN: Under this mode, light will run with inside code(data), ignore data from DMX controller.
• SOUND CTRL: Under this mode, light ignore data
3. SET DISPLAY
Light support 2 language, rotation display. Enter page to set parameter following:
- LANGUAGE: Select display as simplified Chinese or English.
- SCREEN SAVER: when panel is idle(these is no operation in 10 second), displayer will enter saver status. When set as MODE 1: saver status is close display, as MODE 2 saver status will display DMX address code(DMX MODE) or display LOGO (AUTO )
Enter the page of DMX address, click the blank area in right side of display will pop-up diglog as in Fig. 4, modify value, then click ‘ENTER’ to confirm and save DMX address code.
from DMX controller. When there is a strong sound in stage, the light will run a scene, otherwise it will keep the last scene.
• M/S CHOOSE: M/S Choose is available when light just in AUTO RUN or SOUND Ctrl mode. If this item is set as OFF the light don’t send data to other light via DMX Cable. When ON, the data will send to other slave light immediately.
• CHANNEL MODE: Light support 2 DMX Channel mode: sample or extend.
RUN or SOUND CTRL). As OFF, keep light up display and show main menu.
• SCREEN ROTATION: rotate display.
• TOUCH ENABLE: Disable or enable touch function, when disable, use encoder to operate light and set parameter.
• TOUCH ADJUST: adjust touch function, normally, not enter this item.
4. TEST LIGHT
Enter the page , Light will into test mode, in this mode, the light does not receive the data for DMX controller:
• PAN: range for 0 to 255;
• TILT: range for 0 to 255;
• FOCUS: range for 0 to 255;
5. SET LIGHT RUN PARAMETER
Enter the page, set the parameter of light:
• PAN INVERT: Reverse PAN move.
• RECTIFY ENABLE: set as OFF, PAN or TILT will disable position rectify function. As ON, when PAN or TILT lose steps, light will rectify auto.
• PAN OFFSET: Set PAN original position.
6. VIEW STATUS
Enter the page:
• View light current status, version.
• DMXCLR: Click to clear all DMX data to ‘0’.
• SYSRST: Click to reset light.
• COLOR: range for 0 to 255;
• GOBO: range for 0 to 255;
• PRISM: range for 0 to 255;
• FROST: range for 0 to 255;
• STROBE: range for 0 to 255;
• TILT OFFSET: Set TILT original position.
• LAMP UP WHEN: Select lamp on mode, includes 3 mode: power on, afer reset done and manual.
• FACTORY SETTING: restore all parameter to factory setting.
8. DMX CHANNELS
23 CHANNEL MODE
CH
|
NAME
|
VALUE
|
BRIEF
---|---|---|---
1
|
Pan
|
0-255
|
0-540º
2
|
Pan Fine
|
0-255
|
0-2º
3
|
Tilt
|
0-255
|
0-270º
4
|
Tilt Fine
|
0-255
|
0-1º
5
|
P/T Speed
|
0-255
|
Fast to slow
6
|
Dimmer
|
0-255
|
0-100% dimmer
7
|
Strobe
|
0-3
|
Dark
4-103
|
Pluse strobe slow to fast
104-107
|
Open
108-155
|
Gradually open strobe slow to fast
156-207
|
Gradually close strobe slow to fast
208-212
|
Open
213-251
|
Rand strobe slow to fast
252-255
|
Open
8
|
Colour
|
0-9
|
White
10-19
|
Colour 1
20-29
|
Colour 2
30-39
|
Colour 3
40-49
|
Colour 4
50-59
|
Colour 5
60-69
|
Colour 6
70-79
|
Colour 7
80-89
|
Colour 8
90-99
|
White + Colour 1
100-109
|
Colour 1 + Colour 2
110-119
|
Colour 2 + Colour 3
120-129
|
Colour 3 + Colour 4
130-139
|
Colour 4 + Colour 5
140-149
|
Colour 5 + Colour 6
150-159
|
Colour 6 + Colour 7
160-169
|
Colour 7 + Colour 8
170-179
|
Colour 8 + Colour 9
180-215
|
Rotate forward (fast to slow)
9
|
CTO
|
0-255
|
CTO
---|---|---|---
10
|
Cyan
|
0-255
|
Cyan
11
|
Magenta
|
0-255
|
Magenta
12
|
Yellow
|
0-255
|
Yellow
13
|
Gobo
|
0-9
|
Open
10-14
|
Gobo 1
15 -19
|
Gobo 2
20-24
|
Gobo 3
25-29
|
Gobo 4
30-34
|
Gobo 5
35-39
|
Gobo 6
40-44
|
Gobo 7
45-49
|
Gobo 8
50-54
|
Gobo 9
55-59
|
Gobo 10
60-64
|
Gobo 11
65-69
|
Shake slow to fast Gobo 1
70-74
|
Shake slow to fast Gobo 2
75-79
|
Shake slow to fast Gobo 3
80-84
|
Shake slow to fast Gobo 4
85-89
|
Shake slow to fast Gobo 5
90-94
|
Shake slow to fast Gobo 6
95-99
|
Shake slow to fast Gobo 7
100-104
|
Shake slow to fast Gobo 8
105-109
|
Shake slow to fast Gobo 9
110-114
|
Shake slow to fast Gobo 10
115-119
|
Shake slow to fast Gobo 11
120-127
|
White
128-190
|
Rotate reverse (fast to slow)
191-192
|
Stop
193-255
|
Rotate forward (fast to slow)
14
|
Zoom
|
0-255
|
Large to small
15
|
Focus
|
0-255
|
Far to near
16
|
Rot Gobo
|
0
|
White
1-9
|
White 35 degree
10-19
|
Gobo 1
20-29
|
Gobo 2
30-39
|
Gobo 3
|
|
40-49
|
Gobo 4
---|---|---|---
50-59
|
Gobo 5
60-69
|
Gobo 6
70-79
|
Gobo 7
80-89
|
Shake slow to fast Gobo 1
90-99
|
Shake slow to fast Gobo 2
100-109
|
Shake slow to fast Gobo 3
110-119
|
Shake slow to fast Gobo 4
120-129
|
Shake slow to fast Gobo 5
130-139
|
Shake slow to fast Gobo 6
140-149
|
Shake slow to fast Gobo 7
150-200
|
Rotate foward (fast to slow)
201-205
|
Stop
206-255
|
Rotate reverse (slow to fast)
17
|
Gobo.Rot
|
0-127
|
0-360º
128-190
|
Rotate reverse (fast to slow)
128-190
|
Stop
193-255
|
Rotate forward (slow to fast)
18
|
Prism 1
|
0-127
|
None
128-255
|
Insert Prism 1
19
|
Prism1.R
|
0-127
|
0-360º
128-187
|
Rotate reverse (fast to slow)
188-195
|
Stop
196-255
|
Rotate forward (slow to fast)
20
|
Prism2
|
0-127
|
None
128-255
|
Insert prism2
21
|
Prism2.R
|
0-127
|
0-360º
128-187
|
Rotate reverse (fast to slow)
188-195
|
Stop
196-255
|
Rotate forward (slow to fast)
22
|
Frost
|
0-127
|
None
128-255
|
Insert Frost
23
|
Reset
|
0-209
|
None
210-215
|
Reset XY motor over 3 second
216-219
|
None
220-235
|
Reset Efect motor over 3 second
236-239
|
None
240-255
|
Reset fxiture over 3 second
21 CHANNEL MODE
CH
|
NAME
|
VALUE
|
BRIEF
---|---|---|---
1
|
Pan
|
0-255
|
0-540º
2
|
Pan Fine
|
0-255
|
0-2º
3
|
Tilt
|
0-255
|
0-270º
4
|
Tilt Fine
|
0-255
|
0-1º
5
|
Dimmer
|
0-255
|
0-100% dimmer
6
|
Strobe
|
0-3
|
Dark
4-103
|
Pluse strobe slow to fast
104-107
|
Open
108-155
|
Gradually open strobe slow to fast
156-207
|
Gradually close strobe slow to fast
208-212
|
Open
213-251
|
Rand strobe slow to fast
252-255
|
Open
7
|
Colour
|
0-9
|
White
10-19
|
Colour 1
20-29
|
Colour 2
30-39
|
Colour 3
40-49
|
Colour 4
50-59
|
Colour 5
60-69
|
Colour 6
70-79
|
Colour 7
80-89
|
Colour 8
90-99
|
White + Colour 1
100-109
|
Colour 1 + Colour 2
110-119
|
Colour 2 + Colour 3
120-129
|
Colour 3 + Colour 4
130-139
|
Colour 4 + Colour 5
140-149
|
Colour 5 + Colour 6
150-159
|
Colour 6 + Colour 7
160-169
|
Colour 7 + Colour 8
170-179
|
Colour 8 + Colour 9
180-215
|
Rotate forward (fast to slow)
8
|
Cyan
|
0-255
|
Cyan
---|---|---|---
9
|
Magenta
|
0-255
|
Magenta
10
|
Yellow
|
0-255
|
Yellow
11
|
Gobo
|
0-9
|
Open
10-14
|
Gobo 1
15 -19
|
Gobo 2
20-24
|
Gobo 3
25-29
|
Gobo 4
30-34
|
Gobo 5
35-39
|
Gobo 6
40-44
|
Gobo 7
45-49
|
Gobo 8
50-54
|
Gobo 9
55-59
|
Gobo 10
60-64
|
Gobo 11
65-69
|
Shake slow to fast Gobo 1
70-74
|
Shake slow to fast Gobo 2
75-79
|
Shake slow to fast Gobo 3
80-84
|
Shake slow to fast Gobo 4
85-89
|
Shake slow to fast Gobo 5
90-94
|
Shake slow to fast Gobo 6
95-99
|
Shake slow to fast Gobo 7
100-104
|
Shake slow to fast Gobo 8
105-109
|
Shake slow to fast Gobo 9
110-114
|
Shake slow to fast Gobo 10
115-119
|
Shake slow to fast Gobo 11
120-127
|
White
128-190
|
Rotate reverse (fast to slow)
191-192
|
Stop
193-255
|
Rotate forward (fast to slow)
14
|
Red Gobo
|
0
|
White
1-9
|
White 35 degree
10-19
|
Gobo 1
20-29
|
Gobo 2
30-39
|
Gobo 3
40-49
|
Gobo 4
|
|
50-59
|
Gobo 5
---|---|---|---
60-69
|
Gobo 6
70-79
|
Gobo 7
80-89
|
Shake slow to fast Gobo 1
90-99
|
Shake slow to fast Gobo 2
100-109
|
Shake slow to fast Gobo 3
110-119
|
Shake slow to fast Gobo 4
120-129
|
Shake slow to fast Gobo 5
130-139
|
Shake slow to fast Gobo 6
140-149
|
Shake slow to fast Gobo 7
150-200
|
Rotate foward (fast to slow)
201-205
|
Stop
206-255
|
Rotate reverse (slow to fast)
15
|
Gobo.Rot
|
0-127
|
0-360º
128-190
|
Rotate reverse (fast to slow)
128-190
|
Stop
193-255
|
Rotate forward (slow to fast)
16
|
Prism 1
|
0-127
|
None
128-255
|
Insert Prism 1
17
|
Prism1.R
|
0-127
|
0-360º
128-187
|
Rotate reverse (fast to slow)
188-195
|
Stop
196-255
|
Rotate forward (slow to fast)
18
|
Prism2
|
0-127
|
None
128-255
|
Insert prism2
19
|
Prism2.R
|
0-127
|
0-360º
128-187
|
Rotate reverse (fast to slow)
188-195
|
Stop
196-255
|
Rotate forward (slow to fast)
20
|
Frost
|
0-127
|
None
128-255
|
Insert Frost
21
|
Reset
|
0-209
|
None
210-215
|
Reset XY motor over 3 second
216-219
|
None
220-235
|
Reset Efect motor over 3 second
236-239
|
None
240-255
|
Reset fxiture over 3 second
amproweb.com
/amprogroup /amprogroup
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>