TOBBI GLA45 Mercedes Benz Electric Car User Manual

: September 18, 2024
: TOBBI

Table of Contents

TOBBI GLA45 Mercedes Benz Electric Car
Structure diagram
Installation Steps
Safety Warning
PRODUCT FUNCTIONS
Troubleshooting
Repair and Maintenance
Product Circuit Diagram
Disclaimer
FREQUENTLY ASKED QUESTIONS
VIDEO – PRODUCT OVERVIEW
Read User Manual Online (PDF format)
Download This Manual (PDF format)

TOBBI GLA45 Mercedes Benz Electric Car

Four wheel suspension
double door
USB, MP3, TF card jack
leather seat (optional)
high door (optional)
maximum user weight: 30kg

Warning

It has to be assembled by adults

Read and understand this manual before use
charge the battery for at least 4-6 hours before the first use Please keep this manual well for future reference
toys should be used with caution as skills are required to avoid injury to users or third parties from falling or colliding
Warning: do not use for traffic!

Standard

Thank you for purchasing our product and we hope your child will enjoy this product in the next few years. As you read this guide, keep these points in mind:

Age: 3-8years	Power supply mode: Rechargeable
Load capacity:30KGS	Battery:12V7Ah/12V4.5Ah
Speed: 3-5 km / h	Product size:1106858cm
Charger:12V1000MA	Charging time:8-12 hours

Structure diagram

Warning: The assembly of the coward must be operated by adults. It takes about 10 minutes to assemble this product. Potentially dangerous sharp edges or sharp tips before assembly.
Tools required for assembly: screwdriver (self-provided).
Warning: There are small parts in the package of this electric stroller, which is dangerous to choke. It is rigorous for children to touch and play.
Warning: Please check the quantity of all parts before installation. Please properly handle the plastic bags of the products. Children are strictly playing and there is danger of suffocation!
Warning: Contains small parts and is not suitable for children under 36 months old!

Installation Steps

Rear wheel installation:
Turn over the bottom of the toy car. Put the wheel anti-wear screen into the tire, then put the tire into the rear axle, put a washer on the outside, then put the M8 screw into the tire and tighten it. Tighten the screws on both sides of the rear wheel at the same time, and then cover the wheel cover.
Front wheel installation:
Put the wheel anti-wear screen into the tire, then put one wheel into the front axle, put a washer on the outside, then put the M8 screw in and tighten, then cover the wheel cover, and the other wheel will be installed in the same way.
Rear auxiliary wheel installation:
Place the 0412 self-tapping screw into the rear auxiliary wheel with a screwdriver, put the rear auxiliary wheel into the slot, tighten the 0412 self-tapping screw, and install the other in the same way.
Steering wheel installation:
Loosen the nuts on the steering wheel and remove the bolts from the steering wheel. After connecting the wires, screw on the screws.
Windshield installation:
Clip in the windshield, corresponding to the corresponding buckle.
Car window installation:
Clip in the car window at the corresponding position, then screw the 04*16 self-tapping screw into the corresponding position, and the other one in the same way.
Rearview mirror installation:
Insert rearview mirror into the appropriate clamping slot.
Car rear installation:
Insert the rear of the car into the corresponding clamping slot, and then tighten the 04*12 self-tapping screw at the corresponding position.
Connect power supply:
Insert the black power cord on the car body into the slot to connect the power supply.
Seat installation:
Insert the seat in line with the lower clamping slot, and tighten the rear of the seat with the 04*12 self-tapping screw.
Start the power supply:
When the installation is completed, start the power supply.

Safety Warning

Please tell your child and his playmates the following safety rules and make sure they understand them!
This stroller must be driven under the supervision of an adult
When driving, you should wear protective helmets, shoes and seats.
Make sure your child drives the stroller in a safe driving environment, such as home, garden or field.
Note that strollers are only suitable for driving on hard and flat roads. In order to ensure safety, driving in the following unsafe environments is prohibited:
- Ditch pit, riverside, lawn, slope or uneven ground;
- Public transport roads or other forms of strollers and places where pedestrians walk;
- May hit obstacles that can cause injuries;
- Other unsafe areas
Avoid children driving in the dark. Children will not deal with unexpected obstacles or accidents. Drive only during the day or in a bright area.
Do not use this product outdoors when it rains or snows.
When shifting gears, make sure that the stroller has comolete v stonned movina Please make sure that the user of this product meets the age range of this product and must not exceed the maximum deadweight.
Do not alter the structure and wiring system of this product without authorization Regularly check whether the lines of this stroller are aging or falling off.
Please do not let any children approach the moving stroller and do not let children touch the wheels.
This stroller is equipped with a safety belt. Please instruct children to wear the safety belt when using it to ensure safety.

PRODUCT FUNCTIONS

Player: with USB, MP3, TF card slot.
Light switch: turn light on or off.
Power button : turn the power on or off.
Forward / backward switch: operates with the accelerator to move the toy car forward / backward.
Accelerator: operates with forward / backward switch.

When the toy car loses power, you can push it home with small wheels and handles.

When your child gets out of the car, please open the door button as shown in the picture below. And don’t forget to lock the door with the button above when the child is driving.

Warning:

Non rechargeable batteries shall not be charged;
Different types of batteries or new and old batteries should not be mixed;
The battery should be inserted into the correct polarity;
Depleted batteries will be removed from toys;
The supply terminals shall not be short circuited.
Rechargeable batteries should only be charged under adult supervision;

The rechargeable battery should be removed from the toy before charging.

First, open the battery cover on the back of the remote controller and load two 1.5 VAAA alkaline batteries.

Note: Positive and negative positions prevent short circuit of power supply terminals.

Turn off the power supply and press the pair key for 3-5 seconds. The light flashes to turn on the power supply.
Forward and backward switch: According to the forward direction, the stroller moves forward;
- Emergency stop key: Control the stroller to stop in case of emergency during driving.
- Fast and slow gear : Adjust the speed of the stroller during driving.
- The remote control key can be automatically turned on and automatically turned off after being idle for about 2 minutes.
- Insert the charger plug into the charging hole.
- Plug the charger plug into the power outlet.

Troubleshooting

Fault	Inspection site	Exclusion Method

The motor does not rotate

| | ****

Yes, replace a new protector No, next.

No, insert the line properly; Yes, next item. No, weld the terminal wire properly; Yes, next item. No, plug in the lead. Yes, next item.

No, change the motor; Yes, check the forward and backward switches and controller connections, or contact agents

and distributors.

| 1. Is the stroller protector loose? (black under that

seat of the stroller

| Inside the protector box: page 4)
| 2. Is the pedal switch line good?
| 3. Is the wire bonding on the motor terminal good?
| 4. Is the motor lead plugged into the controller?
| 5. Does the plug-in of the motor rotate when it is disconnected and directly connected to the battery?

Only forward but not backward, or only backward but not forward

| 1. Is the forward and backward switch connected incorrectly?

2. Is the remote control of the controller not good?

| ****

Yes, follow and change the correct wiring method; No, next

No, check the forward and backward switch again: Yes, contact the agent or distributor.

---|---|---

Can’t charge electricity

| 1. Is the battery plug-in loose?

2. Does the charger feel slightly hot when charging?

| Yes, lock the battery plug-in; No next item. No, the charger may be broken. Replace the charger.

Very slow

| 1. Check whether the battery voltage is above 10V?

2. Connect the motor (with gearbox) directly to the battery, does the speed increase?

| No, charging; Yes, next item.

No, next; If the driver circuit board is faulty, contact the dealer or distributor.

The stroller can move.

The sound is bright and holy.

| 1. Check and control whether the acousto-optic switch is good?

2. Check whether the wire from the battery to the

| No, change the switch; Yes, next item. No, link the plug-in well and connect the disconnection well.

Swing motor does not rotate

| 1. Check whether the swing motion switch is good?

2. Are the connecting wire terminals plugged in?

3. Check whether the motor is good? (same as drive motor

| No, the swing switch is a double-row plug, and the wire can be replaced on one side. Yes, next item. No, insert it again. Yes, next item.

No, contact the agent or distributor.

The stroller goes and stops from time to time.

| ****

1. Do you drive on rugged ground?

2. Check whether the flat wheel can rotate freely.

| ****

1. Yes, under normal circumstances, this product should be driven on smooth roads;

1. Troubleshoot wheel and axle faults.

---|---|---

For the above troubleshooting methods, contact the agent or distributor when the user conditions are not available.

Repair and Maintenance

Parents should check whether the main components are in good condition and whether the battery, charger ‘wire’ plug ‘shell and other components are damaged. Whether the screw is loose; Whether there is any potential safety hazard, stop using it when damage is found until it is repaired in good condition.
After a period of use, lubricate the iron parts of the stroller with a small amount of lubricating oil to prevent wear and rust. Strollers should be placed away from fire sources and avoid long-term illumination. When storing, it should be laid flat upward, not upside down ’tilted; In humid weather,strollers should be parked indoors or covered withwaterproof cloth.
Strollers should stay away from hotter objects, such as stoves and heaters. Plastic parts may melt. When charging, stay away from flammable items toprevent fire.
Please charge in time after use. Charging must be operated by adults. If it is collected or not used for a long time, it must be fully charged first, and then charged at least once a month to prolong the service life of the battery. Otherwise, it will beuseless not to use the battery for a long time.
When cleaning the stroller, Use dry soft cloth to wipe the stroller, or use non-wax and shaped furniture polishing materials instead of soft cloth wiping materials parts to achieve the surface finish effect. Do not use chemical solvents to wipe the plastic parts of toys, do not use soap and water to clean the stroller, do not accelerate the stroller in rainy or snowy weather, and water will damage theelectrical system and battery of the motor ‘stroller.
When stopping using or placing the product, please cut off the power supply of the product and set all switches to the “stop” or “off” positions to prevent the stroller from being powered on. Do not use protectors that do not conform to this product. Please do not change the structure and wiring system of this product without authorization. Maintenance work must be carried out under the guidance of professional or technical personnel.

Product Circuit Diagram

Disclaimer

Our company will not be responsible for any consequences caused by any changes in lines, structures and functions without our authorization. It is hereby declared that!

This manual is only suitable for sale and use in the Chinese market.
The illustrations used in this manual are to explain the operation method and product structure of the product. When there is a small difference betweenthe physical object and the illustrations, please refer to the physical object.
In order to improve the quality of the product, we may change parts of the product without notification. Please understand the structure and appearance.
The package contains important information that must be retained.

www.tobbi.com