Alphamega DSL010 Desk Lamp Owner’s Manual
- September 19, 2024
- Alphamega
Table of Contents
Alphamega DSL010 Desk Lamp
Specifications
- Model: DSL010
- Rated Power: 230V ~ 50Hz
- Electrical Insulation: Level II
- Max Wattage: 40 Watts
- Bulb Type: E27
Product Usage Instructions
Operating Instructions
Electrical Ratings
- Rated Power: 230V ~ 50Hz
- Electrical Insulation: Level II
- Max Wattage: 40 Watts
- Bulb Type: E27
Replacing Bulb
- Switch off and unplug mains cable.
- Gently unscrew the bulb.
- Replace with a new bulb.
Care and Maintenance
- To clean, use a soft cloth to wipe the product’s surface. Do not use abrasive cleaners or solvents, as they may damage the product.
- Turn off the power when replacing the bulb.
Safety Instructions
WARNING
- Do not disassemble or change the inner structure by yourself.
- Keep the product out of the reach of children. Not intended for use by children.
- Turn off the power immediately in case of danger.
ATTENTION
- Read all instructions before use.
- Save these instructions for future reference.
- The manufacturer is not responsible for damage caused by improper operation or changing the structure.
- Paint may come off flexible parts during adjustment.
Important Safety Precautions
- Ensure mains cable is unplugged before replacing bulb.
- Maintain a minimum distance of 20cm between lamp head and any= surface.
Frequently Asked Questions (FAQ):
Q: Can I use a higher wattage bulb than recommended?
A: No, always use a maximum of 40 watts E27 bulb as recommended to avoid
damage or safety hazards.
Q: How should I clean the lamp?
A: Use a soft cloth to wipe the lamp’s surface. Avoid abrasive cleaners or
solvents to prevent damage.
DESK LAMP
Model : DSL010
IMPORTANT INSTRUCTIONS
This leaflet contains all the necessary information to ensure the correct and safe use of this product. We recommend that it is read fully before using or making any adjustment to the lamp.
ATTENTION
- Read all instructions before use.
- Save these instructions for future reference.
- Manufacturer is not responsible for any damage caused from improper operation or changing the structure.
- It is reasonable that the flexible parts have little paint off cause from the operation of adjustment.
WARNING
Do not disassembling and changing inner structure by yourself. Keep the
product out of the reach of children. This product is not intended for use by
children. Turn off the power directly and quickly when danger occurs.
Ensure that the mains cable is unplugged before replacing bulb
Always ensure that a minimum distance of 20cm is kept between the lamp head
and any other surface.
OPERATING INSTRUCTION
- This product is not water-proof, used only in door.
- This product is in double insulation, and the production structure is forbidden to be changed freely.
- The power resource is forbidden to exceed rated voltage.
- Do not touch the bulb or heated parts when applying power or just turning off it.
- Keep the product away from curtains and other flammable materials as fire may result.
- Keep the product out of the reach of children and pets. This product is not intended for use by children.
- Do not cover the lamp shade with cloth and paper.
- To avoid possible electric shock, pinching, or burn hazards, never drop or insert objects in to any opening of the product
- Never operate this product if it has a damaged Power Cord or plug, is not working properly, or has been dropped or damaged This unit has no user serviceable parts. Do not attempt to examine or repair this product yourself. Only qualified service personnel should perform any servicing. Return the product to a service to a service center for inspection and repair.
- Do not touch the bulb when applying power (or when power is already applied) to the lamp as the bulb may become hot.
- Always turn off the product, disconnect the plug from the electrical outlet, and allow the lamp to completely cool before replacing bulbs.
- Turn off the power directly and quickly when danger occurs or any problem unsure appears, and contact qualified personnel for service.
ELECTRICAL RATINGS
| Rated Power | 230V ~ 50Hz |
|---|---|
| Electrical Insulation Level | II |
| Max Wattage | 40 Watts |
| Bulb | E27 |
Replacing bulb: Never touch the bulb while it is on and remember it may take some time to cool. Always ensure the correct replacement is used: 230 volt 40 watt E27. (Never use higher wattage bulbs.) Always allow a hot bulb to cool before handling.
- Switch off and unplug mains cable
- Gently unscrew the bulb
- Replace with new bulb
CARE AND MAINTENANCE
-
To clean, use a soft cloth to wipe the product’s surface.
Do not use abrasive cleaners or solvents, as they may damage the product. -
Turn off the power when replace the bulb.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>