Rollo Rieper MS 1 Wired Motor for Kassettenrollo Instructions
- September 17, 2024
- Rollo Rieper
Table of Contents
**Rollo Rieper MS 1 Wired Motor for Kassettenrollo Instructions
**
Installation of the WIRED motor
ATTENTION:
Installation, testing, placing into operation and troubleshooting of the motor must only be carried out by a qualified electrician (VDE 0100-200)!
The motor must only be connected to a 230V power supply. For connection, the motor must be de-energized.
ATTENTION:
- Do not operate several drives in parallel on one switch.
- Do not connect a drive directly to two switches.
- Do not connect the brown and black wire together, as this will destroy the engine.
Supply line’
- Neutral (1) blue
- Richtung 1 (2) brown
- Richtung 2 (3)’ black
- Schutzleiter (3) green’
Fabric – at the rear
Fabric – front
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>