NCP B677-515 Twin Wood Panel Bed Installation Guide
- September 18, 2024
- NCP
Table of Contents
B677-515 Twin Wood Panel Bed
“`html
Product Information
Specifications
-
Model: B677-515 (Headboard, Footboard & Slats), B677-535
(Side Rails) -
Origin: Made in Malaysia
-
Material: Wood
-
Color: Brown
Product Usage Instructions
Step 1: Headboard Assembly
Assemble the Left Side Facing (LSF) Headboard Leg (C) and Right
Side Facing (RSF) Headboard Leg (D) to the Headboard (A) using the
Allen Key (4) with hardware 1, 2, and 3. Make sure to tighten the
screws periodically.
Step 2: Rail Installation
Hook the Rails (E) into the LSF and RSF Headboard Legs (C &
D) and the Footboard (B). Level the side rail by covering with a
soft cloth and tapping gently with a hammer.
Step 3: Support Legs and Slats Assembly
Attach the Support Legs (F) to the Slats (G).
Step 4: Slat Installation
Connect the Slats (G) to the Rails (E) using a screwdriver with
hardware 5. Adjust the level on Support Legs (F) to level the
bed.
Frequently Asked Questions (FAQ)
Q: How often should I check the tightness of the screws?
A: It is recommended to check the tightness of all screws every
6-8 weeks as screws may become loose with regular use.
“`
A I SSEMBLY NSTRUCTIONS
B677-515 ANDOVER 3/3 T HEADBOARD, FOOTBOARD & SLATS B677-535 ANDOVER 3/ 3-4 /6
T/F SIDE RAILS
Thank you for purchasing this quality product. Be sure to check all packing
materials carefully for small parts, which may have come loose inside the
carton during shipment. Identify and count all items and compare with the
parts list and/or hardware list shown below.
PARTS LIST ITEM DRAWING DESCRIPTION
A
HEADBOARD
B
FOOTBOARD
C
LEFT SIDE FACING (LSF) HEADBOARD LEG
D
RIGHT SIDE FACING (RSF) HEADBOARD LEG
E
SIDE RAIL
F
SLAT SUPPORT
G
WOODEN SLAT
QTY
1 PC 1 PC 1 PC 1 PC 2 PCS 4 PCS 4 PCS
HARDWARD LIST ITEM DRAWING DESCRIPTION QTY
1
JCBB (M8) 8 x 1 3/8″
4 PCS
2
Spring Washer M8 x 5/8″
4 PCS
3
Flat Washer
M8 x 5/8″ x 1/8″ 4 PCS
4
1 PC ALLEN KEY M5
5 x 1 3/8″ x 2 1/2″
5
8 PCS C.S.K SCREW
(M4) 4 x1 1/4″
STEP 1
Assemble the LSF Headboard Leg (C) and RSF Headboard Leg (D) to the Headboard
(A) by using Allen Key (4) with hardware 1,2 and 3.
A
L
C
BACK VIEW
D R
NOTE:MUST TIGHTEN SCREW PERIODICALLY.WITH USE SCREWS WILL BECOME LOOSE CHECK
THIGHT OF ALL SREWS EVERY 6-8 WEEKS.
COMPLETED ASSEMBLY
4x
1+2+3
4
PAGE 1 OF 3 MADE IN MALAYSIA
A I SSEMBLY NSTRUCTIONS
B677-515 ANDOVER 3/3 T HEADBOARD, FOOTBOARD & SLATS B677-535 ANDOVER 3/ 3-4 /6
T/F SIDE RAILS
STEP 2
Hook the Rails (E) into the LSF and RSF Headboard Legs (C & D) and the
Footboard (C).
A
D
E C
E
2
B
1
3 Important !!
LEVEL THE SIDE RAIL BY COVERING WITH A SOFT CLOTH AND TAPPING WITH A HAMMER.
STEP 3
Assemble the Support legs (F) to the Slats (G).
G
F
NOTE:MUST TIGHTEN SCREW PERIODICALLY.WITH USE SCREWS WILL BECOME LOOSE CHECK THIGHT OF ALL SREWS EVERY 6-8 WEEKS.
PAGE 2 OF 3 MADE IN MALAYSIA
A I SSEMBLY NSTRUCTIONS
B677-515 ANDOVER 3/3 T HEADBOARD, FOOTBOARD & SLATS B677-535 ANDOVER 3/ 3-4 /6
T/F SIDE RAILS
STEP 4
Assemble the Slats (G) to the Rails (E) by using a screwdriver with hardware
5. Adjust the Lever on Support Legs (F) to lever the bed.
5 E G
A
D
E C
G F E
B
COMPLETE
NOTE:MUST TIGHTEN SCREW PERIODICALLY.WITH USE SCREWS WILL BECOME LOOSE CHECK THIGHT OF ALL SREWS EVERY 6-8 WEEKS.
PAGE 3 OF 3 MADE IN MALAYSIA
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>