MANDOE MCMP1021 Digital Advertising Media Player User Manual
- June 3, 2024
- MANDOE
Table of Contents
User Manual
Digital Advertising Media Player
MCMP1021
Let’s get started
Digital Advertising Media Player
https://mandoemedia.com/getting-started
To learn more or get help visit mandoemedia.com/getting-
started
Safety Instructions
WARNING:
- To reduce the risk of fire or electric shock, do not expose this device to rain or moisture. The device shall not be exposed to dripping or splashing and that objects filled with liquids, such as vases, shall not be placed on apparatus,
- The direct plug-in adaptor is used as disconnect device, the disconnect device shall remain readily operable.
- To reduce the risk of electric shock, do not remove cover (or back) as there are no user-serviceable parts inside. Refer servicing to qualified personnel.
- Use only the AC adapter which is included in the product package. Any other adapter may cause damage to the device. Such damage is not covered under warranty.
- The power adaptor is used as the power interrupting device. Please pay attention to safety plug and pull and convenient operation.
- Do not expose the appliance to naked flame sources (for example, lighted candles).
- Do not install the appliance in a confined space, such as a bookcase or built-in cabinet.
Correct Disposal of this product. This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the retum and collection systems or contact the retailer or service operator where the product was purchased. They can take this product for environmental safe recycling.
Hazardous Substances Table
| Part Name | Hazardous Substances or Elements |
|---|---|
| Pb | Hg |
| Cabinet assembly | 0 |
| Cable assembly | 0 |
| Power/ Adapter | 0 |
| Plastic and polymer | 0 |
| Metal part | 0 |
O: It indicates that content of toxic and hazardous substance in all
homogeneous material are less than specified limit by Directive2011/65/EU
(RoHS)
x: It indicates that at least one content of toxic and hazardous substance in
all homogeneous material is beyond specified limit by Directive2011/65/EU
(RoHS)
This table shows the toxic and hazardous substance when manufacture this
device, hazardous substance information is based on information from supplier
as well as internal inspection. In some part, hazardous substance cannot be
replaced with current technologies, Tfiretek is always doing its best to
improve the quality of the product.
Manufacture Information:
Shenzhen Amedia Technology Co., Ltd.
No. 01, 2/F, A Plant, Block 8, Minsheng Industrial Park, Longmei Road,
Gaofeng Community, Dalang Office, Longhua District, Shenzhen, China
Hereby, Shenzhen Amedia Technology Co, Ltd declares that MEDIA
PLAYER MCMP1021 is in compliance with Directive 2014/53/EU. The full text of
the EU declaration of conformity is available at the following internet
address: http://amediatech.cn/
FCC Statement
This device complies with part 15 of the FCC rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Caution: Changes or modifications not expressly approved by the party
responsible for Compliance could void the user’s authority to operate the
equipment.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pur suant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harm ful interference
in a residential installation. This equipment generates uses and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
install ation. If this equipment does cause harmful interference to radio or
television reception, which can be deter mined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help important announcement .
Radiation Exposure Statement
To comply with FCC RF exposure compliance requirements, this grant is
applicable to only mobile configurations. The antennas used for this
transmitter must be installed to provide a separation distance of at least 20
cm from all persons and must not be co-located or operating in conjunction
with any other antenna or transmitter.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>