Mandoe Media Pty MCMP1021 Android TV User Manual

MCMP1021
User Manual

*Sorry to the changes of the parameters of our products but without notice.

Getting started

Basic operations

1.1.1 Power on/ off and sleep

1. Connect the device to the TV with HD cable, connect the device to the power adaptor, connect a mouse, air mouse, or other input devices with a USB port
2. After the device and cables are connected, the power LED turns into blue
3. After disconnecting the device from the power adaptor, Power LED turns off.
4. Under power-on mode, press the remote control’s power button, the device is entering into sleep mode, Power LED turns into red
5. Under sleep mode, the device will be wake when you press the remote control’s power button, power LED turns from red to blue.

1.1.2 Open applications
Use remote control’s arrow keys to choose the wanted program, click the OK button to open the selected program
*Accessories and appearance are subject to change without prior notice.

1.1.3 Boot into the wizard page
Language selection

1.  Language —Screen Zoom —VViFi — Launcher — Remote control
2. Complete the above steps to confirm junior into the interface

*This function only operated in the condition of Mouse mode
1.1.4 Switch in the applications
Click “My Apps” to view recently used programs, click the program icon to switch applications arbitrarily

1.1.5 Close Applications
Click the right key of the mouse to back up the last step procedure to close the application directly.
*This function only operated in the condition of Mouse mode

1.1.6 My Apps
Move to “My Apps”, Press OK to enter in. You can see icons referring to different functions on the picture.

Warm reminder:

• Pls find the calculator program and input It318″, then it will show the installation of KODI & other third-party applications and uninstall KODI application.
  1.1.7 WIFI Function

  1. Home Screen—SETTINGS—Network–.Select “Wi-Fi” to open the WIFI function
  2. Choose Hotspot—Input Password—Connect to the network

1.1.8 Ethernet Function

1. Home Screen–SETTINGS—’Network—’Select “Ethernet” to open the Ethernet function
2. Insert network cable, the network will be connected automatically

1.1 .9 File Browser
Move to “File browser. Press OK to enter into the device list. When inserting with a USB device or SD/SDHC/MMC cards, the sign “Device is mounting” will be shown on the screen. Here you can cut, copy, paste and move the files and folder between the local disk and external storage card.

Read TF card
Insert TF card into the device in the status of power on, when the icon appears in the top left corner of the desktop, open “File Browser”, the identified External Storage Card will appear under “”Local Disk, TF card’s operation is available now.

Troubleshooting Warning

Under no circumstances should you try to repair the TV BOX by yourself, as this will invalidate the warranty. Do not open the BOX as there is a risk of electric shock. If a fault occurs, firstly check with the points listed below before taking the TV BOX for repair. If you are unable to remedy the problem by following hints, consult your dealer for help.

the TV BOX.
-Press the power on the remote controller to turn on the power.
No picture| -Re-connect with HDTVcable or AV cable. -Check if the TV is switched on.
No sound or distorted sound| -Adjust the volume.
-Check if the speakers are connected correctly.
No audio or digital output| -Check the digital connections.
-Check if your amplifier is set correctly.
The player does not respond to the Remote Control
The player does not respond to some operating commands during playback| -Aim the remote control directly at the sensor on the front of the TV BOX.
-Reduce the distance to the N BOX.
-Replace the batteries in the remote control.
-Operations may not be permitted. Refer to the user manual. -Possibility of system halted, re-insert with a power adaptor to restart.
No sound during movies| -The audio codec may not be supported by the TV BOX. You can change to the supported audio on the playing menu.
-Check the volume.
The contents of the USB flash drive cannot be read| -The USB flash drive format is not compatible with the box.
-If one of the USBs can not be read, please turn off the N BOX for 30 seconds and restart the TV BOX.
The TV screen is blank and the player LED is blinking| -Turn off your TV BOX, wait 30 seconds, turn it on again.
-If under HDTV status, check if HDTV connection is correct or change another HDTV cable, set the output resolution of this N BOX into 720p.
---|---
Slow operation of the USB flash drive| -Big file size or high-resolution USB flash drive takes a long time to read and display on the N screen.
---|---
No sound with HDTV connection| -Check the connection between the N and the HDTV jack of the box. -Check your TV system setup.
-Check the volume.

FCC Warning
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.

ISED Statement English:
This device complies with Industry
Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device. The digital apparatus complies with Canadian CAN ICESÿ3 (B)/NMBÿ3(B). Radiation Exposure Statement This equipment complies with Canada’s radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>