TopmaQ FL06-G3 LED Flood Light Installation Guide
- September 17, 2024
- TOPMAQ
Table of Contents
TopmaQ FL06-G3 LED Flood Light
Notes before installation
Please read LED Flood light use manual carefully before installation and follow the instructions. To avoid accidents like damage, dropping, electric shock, fire, please don’t arbitrarily retrofit or change any lamp fittings. Clean lamps with a soft wrung-out soapy cloth, and then wipe it with a dry cloth. Please don’t wipe the lamps with gasoline or other volatiles. Please don’t spray insecticides on the lamps. Otherwise, it may cause discoloration or damage. Please do not open the lamp without permission. Please turn off the power when in installation or maintenance.
- (ID: G3) FL10W-06 FL20W-06 FL30W-06 FL50W-06 FL70W-06 FL80W-06 FL100W-06 FL120W-06 FL150W-06 FL180W-06 FL200W-06 FL240W-06
Installation Dimensions(Unit: mm)
Product name | L1 | L2 | L3 | Ø1 | Ø2 |
---|---|---|---|---|---|
FL10W/20W-06 (ID:G3) | 50.0 | 75.0 | 100.0 | 8.5 | 6.5 |
FL30W/50W-06 (ID:G3) | 100.0 | 140.0 | 180.0 | 8.5 | 8.5 |
FL70W/80W-06 (ID:G3) | 140.0 | 180.0 | 220.0 | 10.5 | 10.5 |
FL100W/120W-06 (ID:G3) | 140.0 | 180.0 | 220.0 | 10.5 | 10.5 |
FL150W/180W/200W-06 (ID:G3) | 140.0 | 180.0 | 220.0 | 10.5 | 10.5 |
Installation Method
- The external flexible cable or cord of this luminaire cannot be replaced; if the cord is damaged, the luminaire shall be destroyed.
- The light source contained in this luminaire shall only be replaced by the manufacturer or his service agent or a similar qualified person. Caution, risk of electric shock
Attention
- Install by qualified electricians only.
- Make sure that the supply voltage is disconnected before installation.
- Make sure the voltage is suitable with the lamps, And L/N/G is connected properly.
- All the lights during installation or use should not be sleds covered vertically upside down or vertically down.
- Don’t open the lamps without the Manufacturer’s Authorization.
Read User Manual Online (PDF format)
Loading......