PXF LIGHTING IP44 Muri Wall LED Installation Guide
- August 15, 2024
- PXF LIGHTING
Table of Contents
PXF LIGHTING IP44 Muri Wall LED
Product Specifications
- Brand: PXF Lighting
- Model: MURI WALL LED
- Input Voltage: 220-240V
- Frequency: 50-60Hz
Product Usage Instructions
Installation
- Ensure the power source matches the input voltage specified (220-240V).
- Identify the appropriate location on the wall for installation.
- Use suitable anchors (not included) to securely mount the luminaire on the wall.
- Connect the luminaire to the power supply following standard electrical wiring practices.
Lamp Replacement
- It is recommended to have the light source replaced by the producer, service representative, or a qualified person. Follow the manufacturer’s guidelines for lamp replacement.
Dimensions
220-240V / 50-60Hz
Power [W]| L [mm]| H [mm]| W [mm]| A [mm]| B
[MM]| P [mm]| Weight [kg]
---|---|---|---|---|---|---|---
6; 13| 330| 130| 100| 300| 100| 30|
1,2
16; 25| 610| 130| 100| 580| 100| 30|
2,1
Wiring Instructions
- Light source used in this luminaire should be changed by the producer or its service representative or similarly qualified person.
- Installation kit supplied with the luminaire does not include anchors for wall installation.
Important Information
Important Warnings
- The luminaries may be installed by qualified registered personnel only.
- Any manipulation inside the luminaire when the power is activated causes the risk of electric shock.
- The manufacturer is not responsible for any flaws resulting from non-compliance with these instructions.
- The manufacturer reserves the right to change the construction of the product.
- Do not install the luminaire in places without sufficient air circulation.
- To guarantee safe luminaire functioning, please follow the instructions in the installation instructions.
- PXF Lighting website: www.pxf.pl
Installation Instructions
FAQ
- Q: Can I use this luminaire with a different input voltage?
- A: No, the luminaire is designed for an input voltage of 220-240V. Using a different voltage may damage the product.
- Q: Are wall anchors included in the installation kit?
- A: No, anchors for wall installation are not included in the installation kit. Please ensure you have suitable anchors before installation.
Contact
PXF Lighting
- 73 Jutrzenki Street 02-230 Warsaw
- tel.: +48 22 33 44 000
- fax: +48 22 33 44 033
- www.pxf.pl
The European Directive 2002/96/EC on waste electrical and electronic equipment, requires that electric and electronic devices must be disposed of in the normal household waste. The crossed out wheeled bin is reproduced in order to remind obligations towards separate collection. For correct disposal, please use authorized waste disposal facilities or return to the distributor at the date a new lighting fitting is purchased. Lamps, if disposed together with the lighting fitting, shall not be broken up since they contain substances which are highly polluting to the environment. Unauthorized disposal of the foregoing waste material is punishable by law.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>