Altronix TROVE2SH2 8 Door Software House Access Owner’s Manual

September 17, 2024
Altronix

TROVE2SH2 8 Door Software House Access

“`html

Product Specifications

  • Enclosure Options:

    • TROVE2: Knockouts accommodate up to 2.0
      conduit, Accommodates four (4) 12VDC/12AH batteries, Dimensions:
      27.25 H x 21.75 W x 6.5 D

    • TROVE3: Knockouts accommodate up to 2.0
      conduit, Accommodates four (4) 12VDC/12AH batteries, Dimensions:
      36.12 H x 30.12 W x 7.06 D

    • TROVE RACK MOUNT: 2U, 24 or 36 deep rack
      drawer on extendable rails, Integrated Z bracket on rear
      facilitates wiring, Dimensions: 3.375 H x 19 W x 24 D

Product Usage Instructions

Access and Power Integration

Altronix offers various models for combining power and
distribution with access controllers. Here are some key
details:

  • Trove 2 Series:

    • TROVE2SH2 TSH2: Enclosure + Backplane
      Backplane only, System Capacity: 16-Doors, Compatible with Software
      House Models: iStar ACM SE, iStar Pro ACM, iStar Pro GCM, iStar
      Ultra GCM, iStar Ultra ACM, i8, r8, i8 CSI

    • T2SK7F8: 8-Door Access System with Power

    • T2SK75F16Q: 16-Door Access System with
      Power

  • Trove 3 Series:

    • TROVE3SH3 TSH3: Enclosure + Backplane
      Backplane only, System Capacity: 16-Doors

    • T3SK758: 8-Door System with Power

    • T3SK75F16: 16-Door System with Power

Pre-configured Access and Power Integration Kits

Altronix offers pre-configured kits for easy setup and
integration:

  • Fuse Protected Models:

    • T2SH7XK1: Trove2SH2 with eFlow104NB, ACMS8,
      VR6, PDS8, RSB1

    • T2SH75XK1Q2P: Trove2SH2 with eFlow104NB,
      eFlow102NB, LINQ2, NetWay5A, LINQ8PD, RSB2

  • PTC Protected Models:

    • T2SH7XK1D: Trove2SH2 with eFlow104NB, ACMS8CB,
      VR6, PDS8CB, RSB1

Frequently Asked Questions (FAQ)

Q: Can I request 220VAC units for the systems?

A: Yes, for specific models like T2SK7F8 and T3SK75F8V, you can
request 220VAC units by adding the suffix V to the model
number.

“`

STREAMLINE DESIGN & DEPLOYMENT

718.567.8181 | info@altronix.com

1

Easily combine Altronix power and accessories with access controllers from the industry’s leading manufacturers – Reducing installation and labor costs!

· Trove streamlines access control design and deployment, increasing profits and ROI.
· Removable backplanes allow you to configure and test prior to on-site installation.
· Trove enclosures are available in different sizes and configurations to meet your project scope ­ including wall mount, rack mount and outdoor models.
· Pre-configured kits are available with power distribution, finger duct and wire assemblies.
· Combine both access and intrusion modules for various brands – all in one enclosure, for added value!
· Optional LINQTM Networked Power Management Technology allows you remotely monitor, control and report power/diagnostics, streamlining service and maintenance operations by leveraging the network.
· Altronix products are TAA & NDAA compliant
· Our free online Trove System Design tool simplifies the design and product selection process: www.altronix.com/system_design_tools/trove
2

718.567.8181 | info@altronix.com

Altronix®

Enclosure Options

TROVE2 – Knockouts accommodate up to 2.0″ conduit – Accommodates four (4) 12VDC/12AH batteries Dimensions: 27.25″ H x 21.75″ W x 6.5″ D
TROVE3 – Knockouts accommodate up to 2.0″ conduit – Accommodates four (4) 12VDC/12AH batteries Dimensions: 36.12″ H x 30.12″ W x 7.06″ D

718.567.8181 | info@altronix.com

TROVE RACK MOUNT – 2U, 24″ or 36″ deep rack drawer on extendable rails – Integrated Z bracket on rear facilitates wiring Dimensions: 3.375″ H x 19″ W x 24″ D
3

Altronix®

Access and Power Integration

Altronix Model

Description/Sub-Assemblies

System Capacity

Compatible Software House Models

Trove 2 Series – Accommodates Altronix Power and Distribution with Controllers

TROVE2SH2 TSH2

Enclosure + Backplane Backplane only

16-Doors

T2SK7F8 T2SK7F8D T2SK75F

Trove 2 Series Pre-assembled Kits
eFlow104NB, ACM8, VR6, PDS8, RSB1 eFlow104NB, ACM8CB, VR6, PDS8CB, RSB1
eFlow104NB, eFlow102NB

8-Doors

iStar ACM SE, iStar Pro ACM, iStar Pro GCM, iStar Ultra GCM,
iStar Ultra ACM, i8, r8, i8 CSI

T2SK75F16Q

eFlow104NB, eFlow102NB, 2-LINQ8PD, RSB2

16-Doors

T2SK75F16DQ

eFlow104NB, eFlow102NB, 2-LINQ8PDCB, RSB2

220VAC units available upon request, add suffix “V” (T2SK7F8V)

T2SK7F8 8-Door Access System with Power

T2SK75F16Q 16-Door Access System with Power

4

718.567.8181 | info@altronix.com

Altronix®

Access and Power Integration

Altronix Model

Power Supply/Charger(s)

Description/Sub-Assemblies

System Capacity

Trove 3 Series – Accommodates Altronix Power and Distribution with Controllers

TROVE3SH3

N/A

TSH3

N/A

Enclosure + Backplane Backplane only

16-Doors

Trove 3 Series Pre-assembled Kits

T3SK758 T3SK75F8 T3SK758D T3SK75F8D

AL1024ULXB2, AL1012ULXB eFlow104NB, eFlow102NB AL1024ULXB2, AL1012ULXB eFlow104NB, eFlow102NB

ACM8, PD8UL, RSB2 ACM8CB, PD8ULCB, RSB2

8-Doors

T3SK7516 T3SK75F16 T3SK7516D T3SK75F16D

AL1024ULXB2, AL1012ULXB eFlow104NB, eFlow102NB AL1024ULXB2, AL1012ULXB eFlow104NB, eFlow102NB

2-ACM8, PD8UL, RSB2 2-ACM8CB, PD8ULCB, RSB2

16-Doors

T3SK77724S T3SK777F24S

3-AL1024ULXB2 3-eFlow104NB

2-ACMS12, 2-PDS16, 2-VR6, RSB2, RSB1

T3SK77724SD T3SK777F24SD

3-AL1024ULXB2 3-eFlow104NB

2-ACMS12CB, 2-PDS16CB, 2-VR6, RSB2, RSB1

220VAC units available upon request, add suffix “V” (T3SK75F8V)

24-Doors

Compatible Software House
Models
iStar ACM SE, iStar Pro ACM, iStar Pro GCM, iStar Ultra GCM, iStar Ultra ACM,
i8, r8, i8 CSI

T3SK777F24SD 24-Door Access System with Power

718.567.8181 | info@altronix.com

5

Altronix®

Pre-configured Access and Power Integration Kits

Altronix Model

Description

System Capacity

Compatible Software House Models

Trove2 Series – Includes Power Distribution, Wire Assemblies for Controllers and Finger-duct for Wire Management

Fuse Protected Models

T2SH7XK1

Trove2SH2 with eFlow104NB, ACMS8, VR6, PDS8, RSB1

T2SH75XK1Q2P

Trove2SH2 with eFlow104NB, eFlow102NB, LINQ2, NetWay5A, LINQ8PD, RSB2

PTC Protected Models

T2SH7XK1D

Trove2SH2 with eFlow104NB, ACMS8CB, VR6, PDS8CB, RSB1

T2SH75XK1DQ2P Trove2SH2 with eFlow104NB, eFlow102NB, LINQ2, NetWay5A, LINQ8PDCB, RSB2 220VAC units available upon request, add suffix “V” (T2SH7XK1V)

8-Doors 1- iStar Ultra GCM and 1 – iStar Ultra ACM 16-Doors 1- iStar Ultra GCM and 2 – iStar Ultra ACM
8-Doors 1- iStar Ultra GCM and 1 – iStar Ultra ACM 16-Doors 1- iStar Ultra GCM and 2 – iStar Ultra ACM

Removeable Backplane For ease of deployment

Finger Duct Option For wire management
Altronix Power Distribution Supporting the Mercury Hardware
Custom Wire Assemblies Factory installed and include terminal block connections for Mercury hardware for ease of installation

6

718.567.8181 | info@altronix.com

Altronix®

Pre-configured Access and Power Integration Kits

Altronix Model

Description

System Capacity

Compatible Software House Models

Trove3 Series – Includes Power Distribution, Wire Assemblies for Controllers and Finger-duct for Wire Management

Fuse Protected Models

T3SH75XK1

Trove3SH3 with eFlow104NB, eFlow102NB, 2-ACMS8, PDS16, RSB2

T3SH75XK1Q

Trove3SH3 with eFlow104NB, eFlow102NB, 2-LINQ8ACM, PDS16, RSB2

T3SH777XK1

Trove3SH3 with 3-eFlow104NB, 3-ACMS8, 2-VR6, 2-PDS16, RSB2, RSB1

T3SH777XK1Q

Trove3SH3 with 3-eFlow104NB, 3-LINQ8ACM, 2-VR6, 2-PDS16, RSB2, RSB1

PTC Protected Models

T3SH75XK1D

Trove3SH3 with eFlow104NB, eFlow102NB, 2-ACMS8CB, PDS16CB, RSB2

T3SH75XK1DQ

Trove3SH3 with eFlow104NB, eFlow102NB, 2-LINQ8ACMCB, PDS16CB, RSB2

T3SH777XK1D

Trove3SH3 with 3-eFlow104NB, 3-ACMS8CB, 2-VR6, 2-PDS16CB, RSB2, RSB1

T3SH777XK1DQ

Trove3SH3 with 3-eFlow104NB, 3-LINQ8ACMCB, 2-VR6, 2-PDS16CB, RSB2, RSB1

220VAC units available upon request, add suffix “V” (T2SH75XK1V)

16-Doors 16-Doors 24-Doors 24-Doors

1- iStar Ultra GCM and 2 – iStar Ultra ACM 1- iStar Ultra GCM and 2 – iStar Ultra ACM 1- iStar Ultra GCM and 3 – iStar Ultra ACM 1- iStar Ultra GCM and 3 – iStar Ultra ACM

16-Doors 16-Doors 24-Doors 24-Doors

1- iStar Ultra GCM and 2 – iStar Ultra ACM 1- iStar Ultra GCM and 2 – iStar Ultra ACM 1- iStar Ultra GCM and 3 – iStar Ultra ACM 1- iStar Ultra GCM and 3 – iStar Ultra ACM

Altronix Power Distribution Supporting the Mercury Hardware
718.567.8181 | info@altronix.com

Custom Wire Assemblies Factory installed and include terminal block connections for Mercury hardware for ease of installation

Finger Duct Option For wire management
Removeable Backplane For ease of deployment
Backup Batteries Ample room in enclosure for batteries
7

Altronix® Rack Mount Access and Power Integration

Front view *Boards not included
Cam Lock
Line Cord
8

Power LEDs
Rear view 2U Drawer on extendable rails for easy access
Z Bracket Included
718.567.8181 | info@altronix.com

AAllttrroonniixx®®

Rack Mount Access and Power Integration

Altronix Model

Power Supply/Charger(s)

Description/Sub-Assemblies

System Capacity

Compatible Access Controller Models

Software House Trove1R Series – Accommodates Altronix Power and Distribution with Controllers

TROVE1SH1R

N/A

2U Rack 19″ Depth Enclosure + Backplane

Trove 1R Series Pre-assembled Kits

16-Doors

T1RSH38 T1RSH3F8

AL600ULXB eFlow6NB

ACMS8, VR6

T1RSH38D T1RSH3F8D

AL600ULXB eFlow6NB

ACMS8CB, VR6

220VAC units available upon request, add suffix “V” (T2RSH3F8V)

8-Doors

iStar ACM SE, iStar Pro ACM, iStar Ultra ACM, i8, r8, i8 CSI

T1RSH3F8 8-Door Rack Mount Access System with Power

Optional Accessory: – RE2 – Rack Mount Battery Enclosure (2U)
Accommodates up to four (4) 12VDC/7AH batteries

718.567.8181 | info@altronix.com

9

Power Distribution / Sub Assemblies for TROVE Series

Altronix Model

Description

ACM4 / ACM4CB ACM8 / ACM8CB ACMS8 / ACMS8CB ACMS8K1 / ACMS8CBK1 ACMS12 / ACMS12CB
LINQ8PD / LINQ8PDCB
LINQ8ACM / LINQ8ACMCB
LPD M0M5 NETWAY5A NETWAY5B NETWAY5P NETWAY5PQ PD4UL / PD4ULCB PD8UL / PD8ULCB PDS8 / PDS8CB PDS8K1 / PDS8CBK1 PD16W / PD16WCB PDS16 / PDS16CB VR6 VR10

4-Output Access Power Controller 8-Output Access Power Controller Dual Input, 8-Output Access Power Controller Dual Input, 8-Output Access Power Controller and Voltage Regulator Kit Dual Input, 12-Output Access Power Controller Dual Input, 8-Output Network Power Distribution Module – Control, Monitor and report Power/Diagnostics Dual Input, 8-Output Network Power Access Power Controller – Control, Monitor and report Power/Diagnostics Low Power Disconnect Module (12/24VDC input) 5-Output Power Distribution Module with Fire Alarm Interface 5-Port Switch Board Facilitates Network Drops (10/100) 5-Port Switch Board Facilitates Network Drops (10/100/100) 5-Port Hardened PoE+ Switch Board 5-Port Hardened Managed PoE+ Switch Board 4-Output Power Distribution Module 8-Output Power Distribution Module Dual Input, 8-Output Power Distribution Module Dual Input, 8-Output Power Distribution Module and Voltage Regulator Kit 16-Output Power Distribution Module Dual Input, 16-Output Power Distribution Module Stackable Voltage Regulator Converts a 24VDC input to 5VDC or 12VDC at 6A Stackable Voltage Regulator Converts a 24VDC input to 5VDC or 12VDC at 10A

Number of Outputs
4 8 8 8 12
8
8
N/A 5 5 5 5 5 4 8 8 8 16 16 1 1

Dimensions
5.175″ x 3.36″ x 1.25″ 8″ x 4.5″ 1.25″ 8″ x 4.5″ 1.25″ 8″ x 4.5″ 2.125″ 8″ x 4.5″ 1.25″
5.5″ x 3.625″ x 1.25″
8″x 4.5″x 1.25″
2″ x 2.75″ 1″ 5.25″ x 3.5″ x 1″ 5.625″ x 3.5″ x 1″ 5.625″ x 3.5″ x 1″ 5.6″ x 3.6″ x 0.75″ 5.6″ x 3.6″ x 0.75″ 5.21″ x 3.25″ x 1″ 5.21″ x 3.25″ x 1″ 5.375″ x 3″ x 1″ 5.375″ x 3″ x 2″ 5.875″ x 6″ x 0.95″ 5.375″ x 3″ x 1″ 5.375″ x 3″ x 1″ 5.375″ x 3″ x 1″

Stackable sub-assemblies save valuable enclosure space, allowing for more power distribution and access controllers.

10

718.567.8181 | info@altronix.com

Optional Accessories for TROVE Series

Altronix Model

Description

BL3

18″ Battery Leads (black and red)

BL4

8″ Battery Series Jumper (yellow)

BL6

68″ Battery Leads (black and red)

BR1

Add-on mounting bracket. Mount additional Altronix sub-assemblies to the enclosure’s side wall.

BT126

12VDC / 7AH Rechargeable Battery

BT1212

12VDC / 12AH Rechargeable Battery

BTL125

Rechargeable 12V Lithium Iron Phosphate (LiFePO4) Battery

CLK1 DNP1 GB1

Thumb Lock. Fits Trove1, Trove2 and Trove3 enclosures.
Altronix DIN Rail Adapter Plate accommodates the following sub-assemblies: ACM4(CB, ACM8(CB), ACM8(CB), ACMS8(CB), ACMS12(CB), LINQ8PD(CB), LINQ8ACM(CB), MOM5, NETWAY5A, NETWAY5B, NETWAY5P, NETWAY5PQ,
PD4UL(CB), PD8UL(CB), PDS8(CB), PDS16(CB)
Altronix Adapter Plate for Genetec Synergis Cloud Link (For Mercury and HID/Vertx)

MM4

Mounting Magnets. 26 lbs. holding force. Pack of 4.

MM8

Mounting Magnets. 26 lbs. holding force. Pack of 8.

MM12

Mounting Magnets. 26 lbs. holding force. Pack of 12.

MM24

Mounting Magnets. 26 lbs. holding force. Pack of 24.

PSC1

Power Supply Protective Cover (Includes standoffs)

RSB1

Rocker Switch with Bracket – Includes single Master Power ON/OFF Switches and Wires

RSB2

Rocker Switches with Bracket – Includes two (2) Master Power ON/OFF Switches and Wires

SPACER1

5/8″ Nylon female/female spacers (standoffs) with 6/32 screws. Pack of 25.

SPACER3

5/8″ Aluminum female/female spacers (standoffs) with 6/32 screws. Pack of 25.

SPACER4

5/8″ Nylon male/female spacers (standoffs) with 6/32 screws. Pack of 25.

SPACER5

5/8″ Nylon snap-on spacers (standoffs) with 6/32 screws. Pack of 32.

SPACER6

1″ Aluminum female/female spacers (standoffs) with 6/32 screws. Pack of 4.

SPACER7

5/8″ Aluminum male/female spacers (standoffs) with 6/32 screws. Pack of 25.

SPACER8

1″ Nylon female/female spacers (standoffs) with 6/32 screws. Pack of 4.

SPACER9

5/8″ Aluminum spacers (standoffs) with 4/40 screws. Pack of 8.

TROVE2BWC

Wire trough/Battery enclosure compliments Trove2 enclosures to accommodate up to four (4) 12VDC/18AH batteries, or conceal side wiring (horizontal mount)

TROVE3BWC

Wire trough/Battery enclosure compliments Trove3 enclosures to accommodate up to four (4) 12VDC/18AH batteries, or conceal wiring (horizontal mount)

TROVE3SWC

Wire trough/Battery enclosure compliments Trove3 enclosures to accommodate up to four (4) 12VDC/40AH batteries, or conceal side wiring (vertical mount)

WM5

Magnetic cable tie mount. Accommodates standard zip ties. 16 lbs. holding force. Pack of 5.

WM10

Magnetic cable tie mount. Accommodates standard zip ties. 16 lbs. holding force. Pack of 10.

WM25

Magnetic cable tie mount. Accommodates standard zip ties. 16 lbs. holding force. Pack of 25.

WM100 Magnetic cable tie mount. Accommodates standard zip ties. 16 lbs. holding force. Pack of 100.

BTL125 CLK1
DNP1 PSC1
RSB2 TROVE3SWC
WM5

718.567.8181 | info@altronix.com

11

Rev. 0124

140 58th Street | Brooklyn, NY 11220 | 718.567.8181 | info@altronix.com

12

718.567.8181 | info@altronix.com

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Altronix User Manuals

Related Manuals