Altronix TROVE2 Mercury Lenel Access and Power Integration Owner’s Manual

Altronix TROVE2 Mercury Lenel Access and Power Integration

Specifications

• Enclosure Options: TROVE2
• Dimensions: 27.25 H x 21.75 W x 6.5 D

Product Information

The Altronix products allow for easy integration of power supplies and accessories with access controllers from top manufacturers, reducing installation and labor costs.

Product Usage Instructions

Power Supply/Chargers for TROVE Series:

Choose the appropriate Altronix model based on your power requirements:

• AL400ULXB2: 12VDC @ 4A or 24VDC @ 3A, 1 output, built-in battery charger
• AL600ULXB: 12VDC or 24VDC @ 6A, 1 output, built-in battery charger
• AL1012ULXB: 12VDC @ 10A, 1 output, built-in battery charger
• AL1024ULXB2: 24VDC @ 10A, 1 output, built-in battery charger

Trove 2 Series Pre-assembled Kits:

Select the appropriate kit based on your system capacity and compatible models from KERI SYSTEMS:

• * T2KSK38: 8-Door Access System with Power

  • T2KSK712: 12-Door Access System with Power

FAQ

Q: Can the TROVE2 enclosure accommodate batteries?

A: Yes, the TROVE2 enclosure can accommodate four (4) 12VDC/12AH batteries.

Q: What are the dimensions of the AL600ULXB power supply?

A: The AL600ULXB power supply has dimensions of 7.1 x 4.5 x 1.44 inches.

Easily combine Altronix power and accessories with access controllers from the industry’s leading manufacturers – Reducing installation and labor costs!

• Trove streamlines access control design and deployment, increasing profits and ROI.

• Removable backplanes allow you to configure and test prior to on-site installation.

• Trove enclosures are available in different sizes and configurations to meet your project scope – including wall mount, rack mount and outdoor models.

• Pre-configured kits are available with power distribution, finger duct and wire assemblies.

• Combine both access and intrusion modules for various brands – all in one enclosure, for added value!

• Optional LINQ™ Networked Power Management Technology allows you remotely monitor, control and report power/diagnostics, streamlining service and maintenance operations by leveraging the network.

• Altronix products are TAA & NDAA compliant

• Our free online Trove System Design tool simplifies the design and product selection process: www.altronix.com/system_design_tools/trove

• TROVE2

  • Knockouts accommodate up to 2.0” conduit
  • Accommodates four (4) 12VDC/12AH batteries Dimensions: 27.25” H x 21.75” W x 6.5” D

Access and Power Integration

 |
---|---

Altronix Model

| Power Supply/Charger(s)|

Description/Sub-Assemblies

| System Capacity|

Compatible KERI SYSTEMS Models

Trove 2 Series – Accommodates Altronix Power and Distribution with Controllers
TROVE2KS2| N/A| Enclosure + Backplane| 12-Doors|

NXT-2D-MSCNE, NXT-4D-MSCNE, NXT-4X4NE, NXTW1, NXTRM3

TKS2| N/A| Backplane only
Trove 2 Series Pre-assembled Kits
T2KSK38| AL600ULXB| ACMS8, PDS8, VR6|

8-Doors

T2KSK3F8| eFlow6NB
T2KSK38D| AL600ULXB| ACMS8CB, PDS8CB, VR6
T2KSK3F8D| eFlow6NB
T2KSK712| AL1024ULXB2| ACM4, ACMS8, PDS8, VR6|

12-Doors

T2KSK7F12| eFlow104NB
T2KSK712D| AL1024ULXB2| ACM4, ACMS8CB, PDS8CB, VR6
T2KSK7F12D| eFlow104NB
220VAC units available upon request, add suffix “V” (T2KSK38V)

Power Supply/Chargers for TROVE Series

 |  |
---|---|---
Altronix Model|

Total Output Power

| Number of Outputs| Built-in Battery Charger|

Input

| Dimensions (L x W x H)
ULXB Series Power Supply/Chargers
AL400ULXB2| 12VDC @ 4A or 24VDC @ 3A|

1

|

SLA

|

115VAC

| 7.1” x 4.5” x 1.44”
AL600ULXB| 12VDC or 24VDC @ 6A| 7.1” x 4.5” x 2.6”
AL1012ULXB| 12VDC @ 10A| 7.5” x 4.5” x 2.25”
AL1024ULXB2| 24VDC @ 10A| 8.4” x 4.5” x 1.95”
AL400ULXB2V| 12VDC @ 4A or 24VDC @ 3A|

220VAC

| 7.1” x 4.5” x 1.44”
AL600ULXB220| 12VDC or 24VDC @ 6A| 7.1” x 4.5” x 2.6”
AL1012ULXB220| 12VDC @ 10A| 7.5” x 4.5” x 2.25”
AL1024ULXB2V| 24VDC @ 10A| 8.4” x 4.5” x 1.95”
eFlow Series Power Supply/Chargers
eFlow4NB| 12VDC or 24VDC @ 4A|

1 Main Output, 1Aux. Output (1A)

|

SLA

|

115VAC

| 7.5” x 4.6” x 1.75”
eFlow6NB| 12VDC or 24VDC @ 6A| 7.5” x 4.6” x 1.75”
eFlow102NB| 12VDC @ 10A| 7.5” x 4.6” x 1.75”
eFlow104NB| 24VDC @ 10A| 8.25” x 4.56” x 1.75”
eFlow4NBV| 12VDC or 24VDC @ 4A|

220VC

| 7.5” x 4.6” x 1.75”
eFlow6NBV| 12VDC or 24VDC @ 6A| 7.5” x 4.6” x 1.75”
eFlow102NBV| 12VDC @ 10A| 7.5” x 4.6” x 1.75”
eFlow104NBV| 24VDC @ 10A| 8.25” x 4.56” x 1.75”
Tango PoE Driven Power Supply/Charger
Tango1B| 12VDC up to 6.25A (75W) and 24VDC up to 3A (75W)| 2| LiFePO4| 90W 802.3bt PoE| 7.625” x 4.125” x 1.25”

PoE Power Sourcing Equipment

PoE Power Sourcing Equipment

Altronix Model| Description
NetWay1BT| Single Port 802.3bt Converter/Injector – 115/230VAC Input, 90W Output
NetWay8BT| 8-Port Managed 802.3bt Midspan Injector supplies 90W per port (480W total power)

 |  |
---|---|---

Altronix Model

|

Description

| Number of Outputs|

Dimensions

ACM4 / ACM4CB| 4-Output Access Power Controller| 4| 5.175” x 3.36” x 1.25”
ACM8 / ACM8CB| 8-Output Access Power Controller| 8| 8” x 4.5” 1.25”
ACMS8 / ACMS8CB| Dual Input, 8-Output Access Power Controller| 8| 8” x 4.5” 1.25”
ACMS8K1 / ACMS8CBK1| Dual Input, 8-Output Access Power Controller and Voltage Regulator Kit| 8| 8” x 4.5” 2.125”
ACMS12 / ACMS12CB| Dual Input, 12-Output Access Power Controller| 12| 8” x 4.5” 1.25”
NETWAY5A| 5-Port Switch Board Facilitates Network Drops (10/100)| 5| 5.625” x 3.5” x 1”
NETWAY5B| 5-Port Switch Board Facilitates Network Drops (10/100/100)| 5| 5.625” x 3.5” x 1”
PD4UL / PD4ULCB| 4-Output Power Distribution Module| 4| 5.21” x 3.25” x 1”
PD8UL / PD8ULCB| 8-Output Power Distribution Module| 8| 5.21” x 3.25” x 1”
PDS8 / PDS8CB| Dual Input, 8-Output Power Distribution Module| 8| 5.375” x 3” x 1”
PDS8K1 / PDS8CBK1| Dual Input, 8-Output Power Distribution Module and Voltage Regulator Kit| 8| 5.375” x 3” x 2”
PD16W / PD16WCB| 16-Output Power Distribution Module| 16| 5.875” x 6” x 0.95”
PDS16 / PDS16CB| Dual Input, 16-Output Power Distribution Module| 16| 5.375” x 3” x 1”
M0M5| 5-Output Power Distribution Module with Fire Alarm Interface| 5| 5.25” x 3.5” x 1”
LINQ8PD / LINQ8PDCB| Dual Input, 8-Output Network Power Distribution Module

– Control, Monitor and report Power/Diagnostics

| 8| 8”x 4.5”x 1.25”
LINQ8ACM / LINQ8ACMCB| Dual Input, 8-Output Network Power Access Power Controller

– Control, Monitor and report Power/Diagnostics

| 8| 8” x 4.5” 1.25”
LPD| Low Power Disconnect Module (12/24VDC input)| N/A| 2” x 2.75” 1”
VR6| Stackable Voltage Regulator Converts a 24VDC input to 5VDC or 12VDC at 6A| 1| 5.375” x 3” x 1”
VR10| Stackable Voltage Regulator Converts a 24VDC input to 5VDC or 12VDC at 10A| 1| 5.375” x 3” x 1”

Power Distribution / Sub Assemblies for TROVE Series

 |
---|---
Altronix Model| Description
BL3| 18” Battery Leads (black and red)|

BL4| 8” Battery Series Jumper (yellow)
BL6| 68” Battery Leads (black and red)
BR1| Add-on mounting bracket. Mount additional Altronix sub-assemblies to the enclosure’s side wall.
BT126| 12VDC / 7AH Rechargeable Battery
BT1212| 12VDC / 12AH Rechargeable Battery
BTL125| Rechargeable 12V Lithium Iron Phosphate (LiFePO4) Battery
CLK1| Thumb Lock. Fits Trove1, Trove2 and Trove3 enclosures.

DNP1

| Altronix DIN Rail Adapter Plate accommodates the following sub-assemblies: ACM4(CB, ACM8(CB), ACM8(CB), ACMS8(CB), ACMS12(CB), LINQ8PD(CB), LINQ8ACM(CB), MOM5, NETWAY5A, NETWAY5B, NETWAY5P, NETWAY5PQ, PD4UL(CB), PD8UL(CB), PDS8(CB), PDS16(CB)
GB1| Altronix Adapter Plate for Genetec Synergis Cloud Link (For Mercury and HID/Vertx)
MM4| Mounting Magnets. 26 lbs. holding force. Pack of 4.
MM8| Mounting Magnets. 26 lbs. holding force. Pack of 8.
MM12| Mounting Magnets. 26 lbs. holding force. Pack of 12.
MM24| Mounting Magnets. 26 lbs. holding force. Pack of 24.
PSC1| Power Supply Protective Cover (Includes standoffs)
RSB1| Rocker Switch with Bracket – Includes single Master Power ON/OFF Switches and Wires
RSB2| Rocker Switches with Bracket – Includes two (2) Master Power ON/OFF Switches and Wires
SPACER1| 5/8” Nylon female/female spacers (standoffs) with 6/32 screws. Pack of 25.
SPACER3| 5/8” Aluminum female/female spacers (standoffs) with 6/32 screws. Pack of 25.
SPACER4| 5/8” Nylon male/female spacers (standoffs) with 6/32 screws. Pack of 25.
SPACER5| 5/8” Nylon snap-on spacers (standoffs) with 6/32 screws. Pack of 32.
SPACER6| 1” Aluminum female/female spacers (standoffs) with 6/32 screws. Pack of 4.
SPACER7| 5/8” Aluminum male/female spacers (standoffs) with 6/32 screws. Pack of 25.
SPACER8| 1” Nylon female/female spacers (standoffs) with 6/32 screws. Pack of 4.
SPACER9| 5/8” Aluminum spacers (standoffs) with 4/40 screws. Pack of 8.
TROVE2BWC| Wire trough/Battery enclosure compliments Trove2 enclosures

to accommodate up to four (4) 12VDC/18AH batteries, or conceal side wiring (horizontal mount)

TROVE3BWC| Wire trough/Battery enclosure compliments Trove3 enclosures

to accommodate up to four (4) 12VDC/18AH batteries, or conceal wiring (horizontal mount)

TROVE3SWC| Wire trough/Battery enclosure compliments Trove3 enclosures

to accommodate up to four (4) 12VDC/40AH batteries, or conceal side wiring (vertical mount)

WM5| Magnetic cable tie mount. Accommodates standard zip ties. 16 lbs. holding force. Pack of 5.
WM10| Magnetic cable tie mount. Accommodates standard zip ties. 16 lbs. holding force. Pack of 10.
WM25| Magnetic cable tie mount. Accommodates standard zip ties. 16 lbs. holding force. Pack of 25.
WM100| Magnetic cable tie mount. Accommodates standard zip ties. 16 lbs. holding force. Pack of 100.

140 58th Street | Brooklyn, NY 11220 | 718.567.8181 | info@altronix.com

References

• Configure Your Trove

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>