DNAKE C112 Intercom System User Guide
- September 16, 2024
- DNAKE
Table of Contents
- C112 Intercom System
- Product Information
- Specifications
- Product Usage Instructions
- Network Connection (PoE)
- Non-Standard PoE Connection
- Q: Can I use a standard RJ45 cable for connecting to the PoE
- Q: What is the recommended power output for optimal
- Q: Can I connect the device to a non-PoE network switch?
C112 Intercom System
“`html
Product Information
Specifications
- Model: V 1.3 600110155303
- Interface: RJ45 (Non-standard PoE)
- Power Output: Not less than 15.4W
- Output Voltage: Not less than 50V
- Compliance: IEEE 802.3af (PoE)
Product Usage Instructions
Network Connection (PoE)
The standard RJ45 interface is designed for connecting to a PoE
switch or other network switch. Ensure that the Power Sourcing
Equipment (PSE) complies with IEEE 802.3af standards, providing an
output power of at least 15.4W and an output voltage of not less
than 50V.
Non-Standard PoE Connection
If you opt for the non-standard PoE configuration, you can
directly connect the RJ45 interface to the non-standard PoE network
port of the indoor monitor.
Frequently Asked Questions (FAQ)
Q: Can I use a standard RJ45 cable for connecting to the PoE
switch?
A: Yes, you can use a standard RJ45 Ethernet cable to connect to
a PoE switch as long as the switch complies with IEEE 802.3af
standards.
Q: What is the recommended power output for optimal
performance?
A: It is recommended to use a PoE switch that provides an output
power of at least 15.4W to ensure optimal performance of the
device.
Q: Can I connect the device to a non-PoE network switch?
A: Yes, if you select the non-standard PoE option, you can
connect the device directly to the non-standard PoE network port of
the indoor monitor.
“`
1. Network (PoE) /
RJ45 (Non-standard PoE)
Standard RJ45 interface is for the connection with PoE switch or other network
switch. PSE shall comply with IEEE 802.3af (PoE) and its output power not less
than 15.4W and its output voltage not be less than 50V. RJ45 can be selected
as non-standard PoE, which can be directly connected to the non-standard PoE
network port of the indoor monitor.
V 1.3 600110155303