Normastahl Crawford 600 Automations for Sectional Doors User Guide

Normastahl Crawford 600 Automations for Sectional Doors

Technical manual

Technical data subject to change without notice.

The crossed-out wheelie bin symbol indicates that the product should be disposed of separately from normal household waste. The product should be recycled in accordance with local environmental regulations for waste disposal. By separating a product marked with this symbol from household waste, you will help reduce the volume of waste sent to incinerators or land- fill and minimise any potential negative impact on human health and the environment.

Declaration of incorporation of partly completed machinery

The manufacturer, ASSA ABLOY Entrance Systems AB, with registered office at Lodjursgatan 10, SE-261 44 Landskrona, Sweden declares that SPARK 600 – 1000 automation systems for sliding gates complies with the following directives:

EC directives

• Machinery Directive 2006/42/EU;
• EMC Directive 2014/30/EU;
• RED Directive 2014/53/UE;
• RoHS 2 Directive 2011/65/EU;
• RoHS 2 Amendment 2015/863/EU.

UK regulations

• Supply of Machinery (Safety) Regulations 2008;
• Electromagnetic Compatibility Regulations 2016;
• Radio Equipment Regulations 2017;
• The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012 (RoHS).

Dimensions

Applications

Machinery Directive
Pursuant to Machinery Directive (2006/42/EC) the installer who motorises a door or gate has the same obligations as the manufacturer of machinery and as such must:

• prepare the technical data sheet which must contain the documents indicated in Annex V of the Machinery Directive;
• (The technical data sheet must be kept and placed at the disposal of competent national authorities for at least ten years from the date of manufacture of the motorised door or gate);
• draw up the EC Declaration of Conformity in accordance with Annex II-A of the Machinery Directive and deliver it to the customer;
• affix the EC marking on the motorised door or gate, in accordance with point 1.7.3 of Annex I of the Machinery Directive;
• ensure compliance of the motorised door or gate with safety regulations, by installing the necessary safety devices.

Standard installation

Ref. Cable

• 1 3G x 1.5 mm²
• 3 2 x 1 mm² – RG-58 50 Ω
• 4 4 x 0,5 mm²
• 6 4 x 0,5 mm²
• 7 2 x 0,5 mm² min
• 9 2 x 0,5 mm² min

Technical specifications

• Power supply

  • 100 V~ / 240 V~, -10%/ +10%, 50/60 Hz
  • 100-120 V~ / 200-240 V~ (selectable by switch), 50/60 Hz

• Power 100 W/150 W

• Motor power supply  24 V

• Power supply for accessories

  • 24 V / 0,3 A max 2 s
  • 24 V / 0,15 A continuous

• Standby <0,8 W Networked Equipment unplugged accessories

• Thrust 600 N 1000 N

• Opening speed 8-22 cm/s – 20 cm/s (Default)

• Closing speed 8-22 cm/s – 10 cm/s (Default)

• Maximum door area (*) 12 m² 17 m²

• Maximum door weight 130 kg/200 kg

• Service class INTENSIVE (tested up to 200,000 cycles)

• Intermittence

  • S2= 60 min (T= 25°C)
  • S3= 75% (T= 25°C)

• Cycle/hour 70 (T= 25°C)

• Continuous cycles 100 (T= 25°C)

• Working temperature (T) -20°C +55°C

• Control panel LCU60

• Remote control functions / programmable keys & Radio frequency

• Noise level LPA <55 dB (A) (operator only)

• the maximum door area was calculated based on a weight of 10.9 kg/m² indicative cycles considering a door h 2350mm and factory settings (default speed opening 20 cm/s and closing 10 cm/s). Configurable speeds up to 22 cm/s. A cycle is considered an opening maneuver followed by a closing maneuver.

• Track length 3300 mm 4400 mm

• Max. carriage stroke 2875 mm 3975 mm

• Maximum height of door 2350 mm 3450 mm

Assembly guide (TS150X2 as an example)

Tensioning the belt

Assembling the automation

Mechanische Installation

Assembling and fastening the arm

Cable passage

Electrical connections

Inputs and Outputs

• Step-By Step
• Closing safety device
• STOP
• Courtesy light
• Flashing light Electric lock output
• Antenna
• Wall-Station
• 24 V /Photocells
• Battery-powered operation (BBK1500X1)

Display controls

Self-learning

1. Turn on the power supply and set the open position

2. Press the ENTER button. Self-learning operation start 

3. The procedure is complete when the door is fully open, and the courtesy light is ON

4. Remote control storage

Favouirtes menu

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>