ADVANTECH PT802 Series 80mm Thermal Receipt Printer Owner’s Manual
- September 16, 2024
- Advantech
Table of Contents
ADVANTECH PT802 Series 80mm Thermal Receipt Printer
Product Specifications
- Model: URP-PT802 Series
- Printing Method: Thermal
- Print Method: Direct Thermal
- Resolution: Standard
- Print Speed: Up to 250mm/sec
- Printing Width: 80mm (58mm, 76mm optional)
- Interface: RS232, Ethernet, USB
- Memory: RAM, Flash
- Fonts: Chinese, Alphanumeric, User-Defined
- Barcode: 1D, 2D (QRcode, PDF417)
Product Usage Instructions
Installation
- Unpack the printer and all included accessories.
- Connect the power cord to the printer and plug it into a power source.
- Connect the desired interface (RS232, Ethernet, or USB) to your computer or POS system.
- Install any necessary drivers provided for Windows/Linux systems.
Paper Loading
- Lift the movable paper guard plate.
- Insert the thermal paper roll into the printer with the correct orientation.
- Adjust the movable paper guard plate to secure the paper in place.
Printing
- Send the print command from your system to the printer.
- The printer will start printing the receipt on the loaded thermal paper.
Frequently Asked Questions
Q: Is the URP-PT802 Series compatible with Mac operating systems?
A: The URP-PT802 Series is designed to work with Windows and Linux systems.
For Mac compatibility, please check for available drivers or software updates
from the manufacturer’s website.
Q: What is the maximum paper thickness supported by the printer?
A: The URP-PT802 Series supports paper thickness according to industry
standards. It is recommended to use paper within the specified range to avoid
any issues with printing.
Introduction
The URP-PT802 is a true breakthrough in the development of POS receipt printers, and the results are better for your budget and the environment. This is most clearly demonstrated with the paper reduction function which cuts down on waste and cost. Actual print speed is an impressive and efficient 250mm per second while multiple printing enables better representation of logos and graphic images. The URP-PT802 works on several platforms, so it’s simple to integrate into your network, and it also comes with built-in USB IF, which means easy migration to USB in the future. This is a highly reliable and easy- to-use POS printer.
Features
- High-speed printing of up to 250mm/sec.
- Three-in-one interface, including RS232, Ethernet and USB.
- Double cash drawer driver.
- Movable paper guard plate design which supports 80mm (58mm, 76mm optional) wide thermal paper.
- Windows/Linux provided with complete OPOS driver.
- Embedded with 2D barcode algorithm supporting the 2D barcode common in the market, such as QRcode/ PDF417.
Feature Highlights
- Metallic Printer
- Enclosure Three-in-One Interface
- Wall Mount Kit
Specifications
| Model | TP 3250L |
|---|
Printing Method
| Print Method| Direct Thermal Line Printing
Resolution| 203 dpi (8 dots/mm)
Print Speed| Max. 250 mm/s
Printing Width| 48 mm / 72 mm
Interface| USB, Serial, Ethernet, Drawer
Page Mode| Support
Memory| RAM| 16 Mb
Flash| 32 Mb
Fonts
| Chinese| GBK 16 x 16, 24 x 24 dots
Alphanumeric| ASCII 9 x 17, 12 x 24 dots
User-Defined| YES
Codepage| 47
Barcode| 1D| UPC-A, UPC-E, EAN8, EAN13, CODE39, ITF, CODEBAR, CODE128, CODE93
2D| PDF417, QR code
Graphics| Supports bitmap printing with different densities, as well as user-
defined bitmap printing (Max size of each bitmap is 40K, the total size of
bitmaps is 256K).
Detection| Sensors| Paper out detection,
Cover open detection
LED Indicator
| Power LED| Green LED
Paper LED| Blue LED
Error LED| Red LED
Power Supply| Input| AC 100V-240V 50-60HZ
Output| DC 24V/2A
Dip Switch| Hardware| NO
Software| YES
Paper
| Paper Type| Thermal Receipt Paper
Paper Width| 58 mm / 80 mm
Paper Thickness| 0.050 ~ 0.09 mm
Roll Paper Diameter| Max. OD Ø83mm
Paper Load| Easy paper loading
Paper Cut| Manual tear or Auto-cutter
Environment| Operation| 0 ~ 40°C, 20 ~ 85% RH
Storage| -20 ~ 70°C, 5 ~ 95% RH
Physical Characteristics| Dimension| 195(L) x 147(W) x 147(H) mm
Weight| 1.8 kg
Options & Accessories| USB Cable, Serial Cable, Paper Roll, Power Adapter,
Quick Start Guide
Software
| Emulation| ESC/POS
Driver
| Windows XP / Vista / Win7 /Win8 / Win10/POSReady/Linux CUPS/ OPOS/JavaPOS
Reliability| TPH life| 150km
Cutter life| 1.5million cuts
Ordering Information
| Part No. | Description |
|---|---|
| URP-PT802-B400 | TP3250L, 80mm Thermal Printer, USE, 250mm/s, blk, ADV |
| 96CB-POWER-B-1.8M1 | Power Cord (China) , 3P 1.8M, BK (CCC) |
| 17AP164900518011 | Power Cord CEE 7/16+C13 L1.8M (CE) |
| 1700013977 | Power Cord 10A 250V 3P 180/90 CCC 200cm (CCC) |
| 1702002600 | Power Cord 3P UL/CSA(USA) 125V 10A 1.83M 180D |
| 1700020098 | Power Cord 3P 10A 250V 183cm (Australian) |
| 1702002605 | Power Cord 2P FRANCE 10A/16A 220V 1.83M 90D (EU) |
| 1700001714 | Power Cord BSMI 3P 7A 125V 18AWG 180cm (BSMI) |
| 1700000237 | Power Cord 3P PSE 12A 125V 1.83M (Japan) |
| 1700018704 | Power Cord BSI 2P 10A 250V 180cm (UK) |
I/O View
Online Download[
www.advantech.com/products](http://www.advantech.com/products)
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>