EXCERA EN8000 Voice Ad Hoc Base Station Instruction Manual
- September 16, 2024
- EXCERA
Table of Contents
- EN8000 Voice Ad Hoc Base Station
- Product Specifications:
- Product Usage Instructions:
- Basic Operation:
- Operating Icons:
- Using the Ad-Hoc Base Station:
- Q: What should I do if any item is missing or damaged in the
- Q: How do I familiarize myself with the mainframe
- Q: How do I operate the hand microphone parts?
EN8000 Voice Ad Hoc Base Station
“`html
Product Specifications:
- Model: EN8000
- Product Name: Voice Ad Hoc Base Station
- Components: Hosts, Mimi Adapter (Device), AC Power Cord,
Suction Cup Antenna
Product Usage Instructions:
Basic Operation:
Make sure all components are properly connected and powered on
before use.
Operating Icons:
-
CAUTION: Matters that may cause damage to the
product or personal injury. -
Note: Matters that will help you better
understand and use the product.
Using the Ad-Hoc Base Station:
Follow the icon indications on the display screen for different
functions.
FAQ:
Q: What should I do if any item is missing or damaged in the
packing list?
A: Please contact your dealer for assistance regarding missing
or damaged items in the box.
Q: How do I familiarize myself with the mainframe
components?
A: Refer to the provided Quick Guide for an introduction to the
mainframe components and their functions.
Q: How do I operate the hand microphone parts?
A: The hand microphone parts are numbered and correspond to
specific functions. Refer to the manual for details on each part’s
usage.
“`
EN8000
Voice Ad Hoc Base Station
This guide helps you quickly master the basic operation of an Ad-hoc base
station. Using the operation icons
CAUTION: Indicates matters that may cause damage to the product or personal
injury.
Note: Indicates matters that will help you better understand and use this
product.
/PUJDFUPVTFS
3&%$BVUJPO ‘SFRVFODZ.)[
591PXFS8 0QFSBUJPOUFNQFSBUVSFSBOHF¥_¥
3’FYQPTVSFJOGPSNBUJPO5IFEFWJDFDPNQMJFTXJUI3’FYQPTVSFSFRVJSFXIFOUIFEFWJDFVTFEBUNNGSPNUIF
CPEZXJUIUIFLOBQTBDL %FDMBSBUJPOPG$POGPSNJUZ
.BOVGBDUVSFS4IFO[IFO&YDFSB5FDIOPMPHZ$P
-UE “EESFTT#VJMEJOH#
5POHGBOH*OGPSNBUJPO)BCPVS
/P-BOHTIBO3PBE
/BOTIBO%JTUSJDU
4IFO[IFO
13$IJOB )FSFCZ
4IFO[IFO&YDFSB5FDIOPMPHZ$P
-UEEFDMBSFTUIBUUIJTQSPEVDUJTJODPNQMJBODFXJUIFTTFOUJBM SFRVJSFNFOUTBOEPUIFSSFMFWBOUQSPWJTJPOTPG%JSFDUJWF&65IJTQSPEVDUJTBMMPXFEUPCFVTFEJO BMM&6NFNCFSTUBUFT &OHJOFFSJOHQFSTPOOFMTFUUJOHVQUIPTFGSFRVFODZSBOHFTXIJU$VTUPNFS1SPHSBNNJOH4PGUXBSF
UIFNFDIBOJTN
JNQMFNFOUFEJOUIFQSPEVDUUPBWPJEUIFFOEVTFSUPNBOBHJOHDIBOHFTJOUIFEFGJOJUJPOPGPQFSBUJOHGSFRVFODZ
SBOHFTJOPSEFSUPBWPJEVTBHFPGVOBMMPXFEGSFRVFODZSBOHFT
5IFBVUIPSJ[FEUPTFUVQUIFQFSNJUUFEGSFRVFODZSBOHFTGPSNBSLFUJOHJOUIFTQFDJGJD&6DPVOUSZ
$PVOUSZ
‘SFRVFODZ3BOHF .)[
“VTUSJB “5
FMHJVN #&
VMHBSJB #(
$SPBUJB )3
$ZQSVT $:
$[FDI3FQVCMJD $;
%FONBSL %,
&TUPOJB &&
‘JOMBOE ‘*
‘SBODF ‘3
(FSNBOZ %&
(SFFDF &-
)VOHBSZ )6
SFMBOE &
UBMZ 5
-BUWJB -7
-JUIVBOJB -5
-VYFNCPVSH -6
.BMUB .5
/FUIFSMBOET /-
1PMBOE 1-
1PSUVHBM 15
3PNBOJB 30
4MPWBLJB 4,
4MPWFOJB 4*
4QBJO &4
4XFEFO 4&
6OJUFE,JOHEPN 6,
‘$$$BVUJPO
/PUJDFUPVTFS
“OZ$IBOHFTPSNPEJGJDBUJPOTOPUFYQSFTTMZBQQSPWFECZUIFQBSUZSFTQPOTJCMFGPSDPNQMJBODFDPVMEWPJEUIFVTFST BVUIPSJUZUPPQFSBUFUIFFRVJQNFOU
5IJTEFWJDFDPNQMJFTXJUIQBSUPGUIF’$$3VMFT0QFSBUJPOJTTVCKFDUUPUIFGPMMPXJOHUXPDPOEJUJPOT
5IJTEFWJDFNBZOPUDBVTFIBSNGVMJOUFSGFSFODF
5IJTEFWJDFNVTUBDDFQUBOZJOUFSGFSFODFSFDFJWFE
JODMVEJOHJOUFSGFSFODFUIBUNBZDBVTFVOEFTJSFEPQFSBUJPO
5IJTSBEJPJTEFTJHOFEGPSBOEDMBTTJGJFEBTo0DDVQBUJPOBM$POUSPMMFE6TF0OMZp
NFBOJOHJUNVTUCFVTFEPOMZ
EVSJOHUIFDPVSTFPGFNQMPZNFOUCZJOEJWJEVBMTBXBSFPGUIFIB[BSET
BOEUIFXBZTUPNJOJNJ[FTVDIIB[BSET/05
JOUFOEFEGPSVTFJOBO(FOFSBMQPQVMBUJPOVODPOUSPMMFEFOWJSPONFOU
%0/05PQFSBUFUIFSBEJPXJUIPVUBQSPQFSBOUFOOBBUUBDIFE
BTUIJTNBZEBNBHFUIFSBEJPBOENBZBMTPDBVTFZPV
UPFYDFFE3’FYQPTVSFMJNJUT”QSPQFSBOUFOOBJTUIFBOUFOOBTVQQMJFEXJUIUIJTSBEJPCZUIFNBOVGBDUVSFSPSBO
BOUFOOBTQFDJGJDBMMZBVUIPSJ[FECZUIFNBOVGBDUVSFSGPSVTFXJUIUIJTSBEJP
%0/05USBOTNJUGPSNPSFUIBOPGUPUBMSBEJPVTFUJNF
NPSFUIBOPGUIFUJNFDBODBVTF3’FYQPTVSF DPNQMJBODFSFRVJSFNFOUTUPCFFYDFFEFE
%VSJOHPQFSBUJPO
JGUIFBOUFOOBHBJOPGUIFBOUFOOBVTFEJTE#J
UIFEJTUBODFCFUXFFOUIFVTFSBOEUIFBOUFOOB TIPVMECFBUMFBTUN
UIJTTFQBSBUJPOEJTUBODFXJMMFOTVSFUIBUUIFSFJTTVGGJDJFOUEJTUBODFGSPNBQSPQFSMZJOTUBMMFE
FYUFSOBMMZNPVOUFEBOUFOOBUPTBUJTGZUIF3’FYQPTVSFSFRVJSFNFOUT
%VSJOHUSBOTNJTTJPOT
ZPVSSBEJPHFOFSBUFT3’FOFSHZUIBUDBOQPTTJCMZDBVTFJOUFSGFSFODFXJUIPUIFSEFWJDFTPS
TZTUFNT5PBWPJETVDIJOUFSGFSFODF
UVSOPGGUIFSBEJPJOBSFBTXIFSFTJHOTBSFQPTUFEUPEPTP%0/05PQFSBUFUIF
USBOTNJUUFSJOBSFBTUIBUBSFTFOTJUJWFUPFMFDUSPNBHOFUJDSBEJBUJPOTVDIBTIPTQJUBMT
BJSDSBGU
BOECMBTUJOHTJUFT
Packing List
The box contains the following items, please contact your dealer if any item
is missing or damaged.
hosts
(dialect) mimi adapter (device)
AC Power Cord
suction cup antenna
(Orders on demand)
Quick Guide
Familiarity with the machine
Introduction of mainframe components
serial numb
er
Part Name
serial number
Part Name
1 Antenna Interface 2 MPT/PDT indicator 3 display screen
11
upwards painting)
key
(in
12
down shift key (on computer keyboard)
13 menu key
4 indicator light 5 Volume/Channel Knob
14
Hand
Microphone
Interface
15 Battery indicator light
6
Hang-up key/ Home key/ Power off key/ [P4] key
16
View Battery Key
7 Programmable keypad [P2
17 batteries
8 Programmable key [P1
18 network port
9 Answer/outgoing key/[P3] 19 data interface
key
10 setup key
20 charging port
Introduction of hand microphone parts
serial numb
er
Part Name
serial number
Part Name
1 microphones 2 alarm button
5 connection line 6 speakers
3 Handset
button
4 PTT key
button/Home 7 Swivelling Clip 8 headphone jack
pre-use preparation
fig. rest and recuperate
Low battery warning may occur when first used; please charge before use; 1 The
AC power cord Pin-tail connector is connected to the adapter connector
(as shown in the right figure ); 2 Plug the 4Pin aerial header of the adapter
into the host connector (as shown
in on the right); 3 The AC power cord plug is inserted into the power outlet
for charging (as
shown in figure on the right).
Remove Battery
First of all, please switch off the main unit, open the two latches at the
bottom by rotating them counterclockwise, and open the battery in the
direction as shown in the picture.
Note: If you need to install the battery, first snap the battery closed to the main unit, then turn the bottom two latches clockwise to lock the battery.
Installation of antenna & hand microphone
Rotate the antenna to connect to the corresponding connector on the front
panel as shown in the figure; insert the hand microphone plug into the
corresponding connector on the front panel.
basic operation
Switching on and off
If you need to turn on the power, please press and hold the power on button
for three seconds to turn on the power, when the end of the power on
animation, the power on is complete. If you need to switch off, please long
press the switch-off button for three seconds to switch off, when the screen
turns black, complete the switch-off.
Check Configuration
After powering on the device, the device will automatically hardware device
self-test, hardware self-test without abnormal display; Configure
corresponding parameters such as frequency points, and configure data such as
whitelist and phone numbers.
status indicator
status icon
icon display
iconography
signal strength indication 4G Signal Strength Marker New message sign, inbox
full sign Scanning for logos Scanning pause sign (general) High power marking
medium power marking Low power marking Battery level marking roaming logo
Missed caller ID Emergency Alarm Signs cryptographic logo full duplex logo
squelch mark voice-activated signage
Note: Status icons vary for different configurations; subject to change without notice due to continuous technological development.
LED indicator
LED status
The green light is blinking slowly. Lights are flashing
green. lit. the green light stays on
forever red light flashing
slowly red light flashing
fast lit. the red light stays on forever Orange light slow
flash flash of orange
light
hidden meaning reservation Being upgraded or booting normally
Receiving
Low battery indicator reservation Launching. Scanning. reservation
shout
Ad-hoc base station supports voice and data relay function, and also supports
as a call terminal to make calls. Ad-hoc adopts the design concept of “switch
on and use”, which is simple to operate. Ad-hoc base station call operation:
1After the Ad-hoc is switched on, rotate to the channel to be used;
2Press the hand microphone PTT key to fire. Ad-hoc base stations operate as
PDT terminals:
1 Individual call: Through the menu Contacts, find the person you want to call
and press the hand microphone PTT key to make a call.
2 Group Call: Rotate the Group knob to the group you want to talk to and press
the hand microphone PTT key to make a call.
Note: When doing voice and data transit, simply switch the machine on.
Optional Accessories
The main optional accessories of this machine have been included in the
following list, if you need more information about the accessories, please
call our service hotline, hotline: 010-67869119.
Bluetooth headset
Wireless PTT
frequency writing line
network cable
Note: Please use the accessories specified by our company. If unauthorised
parts are used, the user is solely responsible for any consequences.
Quality Assurance and Maintenance Terms
Quality Assurance and Maintenance Terms
Shenzhen Anxinzhuo Technology Co., Ltd. promises that all products produced by Anxinzhuo, since the date of purchase, under normal conditions of use, operation and maintenance, defects in materials or manufacturing process, can enjoy the warranty service as stipulated below:
EN8000 replacement (parts)
2 years 6 months
Warranty Details
1. The original of the customer’s completed warranty card or valid purchase
invoice or receipt as the authentication of the warranty, the invoice or
receipt should indicate the host accessories, factory serial number, date of
sale and the amount of the purchase.
2. Walkie-talkie, car radio and other terminal products can be returned,
exchanged or repaired within 7 days for problems caused by non-human reasons,
exchanged or repaired within 15 days, and repaired free of charge beyond 15
days and within the warranty period.
3. Axiomtek provides customers with lifelong repair and maintenance services,
for products beyond the warranty period, our company can still continue to
provide customers with repair and maintenance services, but will charge a
reasonable labour and material costs as appropriate.
Exclusions from warranty
1. Failures and damages caused by human damage, use in abnormal working
conditions, and use not in accordance with the instructions.
2. Without the company’s consent users privately dismantle the machine,
maintenance, modification, etc. caused by the failure or damage.
Quality Assurance and Maintenance Terms
3. Damage caused by force majeure (e.g. flood, lightning, earthquake,
tsunami, fire, high voltage, etc.).
4. Failure to produce valid proof of warranty (warranty card, invoice or
receipt, etc.). 5. Machine barcodes, tamper-evident labels are damaged or
illegible. 6. Normal use old, worn, cracked, etc.
statement denying or limiting responsibility
This user manual has been prepared with the utmost care to ensure the accuracy
and completeness of its contents, but we do not accept any responsibility for
any errors or omissions that may occur. Due to the continuous development of
technology and products, we reserve the right to change product design and
specifications without notice. This manual may not be reproduced, modified or
translated in any form without our prior written authorisation.
Quality Assurance and Maintenance Terms
warranty card
Purchase Information
Purchase of units: Unit contact number: Unit mailing address: Date of
purchase:
Host Information
Host Model: Product Serial Number:
caveat
This warranty card applies only to the three-pack service for the main unit
and accessories with the serial number listed above. Please keep this warranty
card in a safe place and present it and the relevant invoice when enjoying the
three guarantees. This card needs to be stamped by the selling unit to be
valid. Human damage is not covered by the warranty, please refer to the
“Service Policy” for specific warranty coverage.
SHENZHEN EXCERA TECHNOLOGY C0.,LTD.
Add: 201Building B,Tongfang Information Habour, No.11Langshan Road,Nanshan
District,Shenzhen 518057,P.R.China
Postal Code:518057 Web: www.excera.com.cn Tel:+86-755-33010298