MR BEAM MB980 Wireless Motion Sensor LED Ceiling Light Instruction Manual
- June 17, 2024
- Mr Beam
Table of Contents
Wireless Motion Sensor LED Ceiling Light Light Sensor Removal
Instructions
MB980
MB980 Wireless Motion Sensor LED Ceiling Light
Important:
Before you begin, these instructions are for customers who find there is
ambient light in the desired location that pre-vents their light from
activating. Once the sensor is removed, your light will activate, regardless
of surrounding lights.
Battery life will decrease once the sensor is removed, because light will
activate more often. Please note that once the sensor is removed, your
warranty is void. We appreciate your interest in our products and are more
than happy to help you customize your light for your specific need. Please
call or email any questions to our customer service.
Phone: 1 877-298-9082 Email:
info@mrbeams.com
-
Remove mounting bracket from back of light.
Remove back plate by removing thumb screw.
-
Pull out battery compartment by squeezing the clips with finger (or pliers) to pull it out of the cover.
-
The light sensor is a round component with a bent red line on the top. The light sensor can be removed with needle nose pliers, gently twisting until it detaches from unit.
-
Replace battery compartment until it clicks securely into clips. See your user manual for installation instructions.
www.mrbeams.com ****32333 Aurora Rd. Suite 100
Solon, OH 44139
877.298.9082
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>