BOARDCON CM210-II Embedded Design System on Module for Data Terminals User Manual

BOARDCON CM210-II Embedded Design System on Module for Data Terminals

Product Information

Specifications

• CPU: Samsung S5PV210AH-A01GHz ARM Cortex A8 Core
• RAM: On-board 512MB DDR2-RAM
• ROM: On-board SLC or MLC 256MB Nand Flash
• Power Input: 5V & 3.3V
• Features: PowerVR SGX540 3D Graphics Engine, HD Mult-Format video codec, HDMI 1.3 output, AC97 AUDIO interface, and more

Product Usage Instructions

Introduction
This manual provides an overview of the board, its benefits, features specifications, and setup procedures. It also includes important safety information.

Hardware Design Guide
Refer to the Peripheral Circuit Reference and PCB Footprint sections for detailed hardware design guidance.

Product Electrical Characteristics
Understand the dissipation, temperature, and reliability of tests for optimal product performance.

FAQ

• Q: What is the CPU of CM210-II?
  A: The CPU is Samsung S5PV210AH-A01GHz ARM Cortex A8 Core.

• Q: How much RAM does the module have?
  A: The module has on-board 512MB DDR2-RAM.

Introduction

About this Manual
This manual is intended to provide the user with an overview of the board and benefits, complete features specifications, and set up procedures. It contains important safety information as well.

Feedback and Update to this Manual
To help our customers make the most of our products, we are continually making additional and updated resources available on the Boardcon website (www.boardcon.com, www.armdesigner.com).
These include manuals, application notes, programming examples, and updated software and hardware. Check in periodically to see what’s new!
When we are prioritizing work on these updated resources, feedback from customers is the number one influence, If you have questions, comments, or concerns about your product or project, please no hesitate to contact us at support@armdesigner.com.

Limited Warranty
Boardcon warrants this product to be free of defects in material and workmanship for a period of one year from date of buy. During this warranty period Boardcon will repair or replace the defective unit in accordance with the following process:
A copy of the original invoice must be included when returning the defective unit to Boardcon. This limited warranty does not cover damages resulting from lighting or other power surges, misuse, abuse, abnormal conditions of operation, or attempts to alter or modify the function of the product. This warranty is limited to the repair or replacement of the defective unit. In no event shall Boardcon be liable or responsible for any loss or damages, including but not limited to any lost profits, incidental or consequential damages, loss of business, or anticipatory profits arising from the use or inability to use this product.
Repairs make after the expiration of the warranty period are subject to a repair charge and the cost of return shipping. Please contact Boardcon to arrange for any repair service and to obtain repair charge information.

Summary
CM210-II is System on Module (SOM) based on the Samsung’s S5PV210AH-A0 application processor with ARM Cortex-A8 core in small size, powerful 3D accelerator full HD (1080P) and high-performance HW multimedia.
The module is perfect combination of minimum size, low cost and high performance.
Stable electrical performance, Successful mass production. applicable to MID, POS, PND, and Terminal controller.

Features

• CPU
  • Samsung S5PV210AH-A0，1GHz，ARM Cortex A8 Core
  • 64KB I&D Cache, 512KB L2 Cache
  • PowerVR SGX540 3D Graphics Engine
  • HD Mult-Format video codec(MPEG2, MPEG4, H.264, Divx, VC-1)
• RAM
  • On-board 512MB DDR2-RAM
  • 64bit data bus
  • DDR clock frequency as high as 200MHz
• ROM
  • On-board SLC or MLC 256MB Nand Flash
  • Up to 16GB
• POWER
  • high-efficiency DC-DC converter
  • 5V & 3.3V Power input
• RTC
• HDMI 1.3 output (up to 1080P)
• TV output
• AC97 AUDIO interface
• Watchdog
• Boot mode setting
• 4 UART
  • 2 Three line and 2 Five line
  • Support IrDA
• 1 IIC interface(CH1)
• 1 HS-SPI interface
• SDIO interface
  • 2 4bit SDIO or 1 8bit SDIO
  • Boot in SDIO CH0
• 6 12bit ADIN or 2 ADIN and 4 wire RES-touch panel interface
• 32 interrupt sources
• 2 2.0 USB interface (OTG and HOST)
• 1 32bit PWM Timer out
• 1 Camera interface
  • Max 8192 x 8192 pixels input
  • ITU601/656 8bit support
• TFT LCD BUS
  • 24BPP RGB parallel output
  • PIP(OSD) function
• 16bit system BUS

Block Diagram

1. S5PV210 Block Diagram
2. CM210-II Block Diagram

PCB Dimension

Pin Definition

Multiplexed GPIO

Development Kit (Android210)

Hardware Design Guide

Peripheral Circuit Reference

1. RTC Battery Circuit
2. HDMI Interface Circuit
3. OTG Interface Circuit
4. OM Setting Circuit
5. SD0 Interface Circuit
6. Audio Codec Circuit
7. Ethernet Interface Circuit

PCB Footprint

Product Electrical Characteristics

Dissipation and Temperature

Reliability of Test

www.armdesigner.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>