HDWR HD10C-RS232 Barcode Scanner User Manual
- September 19, 2024
- HDWR
Table of Contents
HDWR HD10C-RS232 Barcode Scanner User Manual
Manual
Automatic RS232 Barcode Scanner
HD10C-RS232
Specifications
- Warranty: 2 years
- Light Source: 620nm LED
- Sensor Type: CCD
- Scanning method: manual (on the button) / automatically (after bringing the code closer)
- Scan Acknowledgement: Light and Sound Signal
- Read Rate: 200 times/second
- Interface: RS232
- Cord length: 140 cm
- Ingress protection: IP54
- Device dimensions: 16 x 9.5 x 6.5 cm
- Stand dimensions: 24 x 12 x 12 cm
- Package dimensions: 18.5 x 12 x 8.5 cm
- Device weight: 300 g
- Weight with packaging: 370 g
- Operating temperature: -20 – 50°C
- Storage temperature: -40 – 60°C
- Readable 1D codes: EAN-8, EAN-13, UPC-A, UPC-E, CODE 128, CODE 39, CODE 93, CODE 11, CHINESE 2 of 5, CODABAR, MSI, Interleaved 2 of 5 (ITF), other one-dimensional
Set contents
- CCD Barcode Reader
- Dedicated stand for self-assembly
- Built-in RS232 communication cable
- Manual
Key features
- Barcode scanning at 200 scans per second
- Ability to scan codes from paper labels and phone screens • Automatic code reading
Factory reset
Barcode scanning modes
To scan barcodes in manual mode, use the scan button to scan the “Factory Default” code.
Beep settings
Setting End Characters
Case settings
Reading inverted codes (on black background)
Setting Prefix and Suffix
In order to set a prefix or suffix, first scan the code “Add prefix” or “Add suffix”, then scan the corresponding character from the table at the end of this manual and finally read the code “Save settings”.
Hiding barcode characters
In order to hide individual characters in the barcode, first scan the code “Hide initial characters” or “Hide end characters” and then use the scanner to read the code at the end of this manual, corresponding to the number of digits to be hidden.
For example, if you want to hide the first two characters of a barcode, first scan the “Hide initial characters” code, then scan the “0” and “2” codes from the table.
Character table
The table below contains codes that allow you to set the prefix, suffix and hide characters from the barcode